• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.973-980
• /
• 1998

The fluorescence spectroscopic properties of both trans and cis forms of 9-anthryiethylene derivatives such as 9-AnthCH=$CHCO_2CH_3$ [Ⅰ] and 9-AnthCH=CHCN [Ⅱ] as well as 9-AnthCH=>TEX>$CHCH_2O_2CCH_3$ [Ⅲ] and 9-AnthCH=$CHCH_2OH$ [Ⅳ] have been measured in various solvents. In nonpolar solvent, the trans-I and trans-Ⅱ show dual emission spectral bands at 340 nm and 460 nm when exciting with 270 nm while the other trans derivatives show single emission band at 430 or 460 nm. The dual emissions exhibit different excitation spectra, indicating that two emissive states are different from each other. It is interesting to note that the 340 nm emission of both trans-Ⅰ and trans-Ⅱ is enhanced at the expense of the drastic quenching of the 460 nm emission as the solvent polarity increases. The dual emissions are also observed for both cis-Ⅰ and cis-Ⅱ. The solvent dependence of the fluorescence decay times and quantum yields can be correlated with the solvent and excitation wavelength dependences of the trans→cis photoisomerization quantum yields. These results indicate that the 340 nm emission is originated from the $S_2$ state of the cis-form, and the $S_1$ state is the only singlet excited state presenting a large CT (charge transfer) character to facilitate the photoisomerization.

• Current Optics and Photonics
• /
• 제5권3호
• /
• pp.243-249
• /
• 2021

In this paper, the sensing characteristics of a double cladding fiber (DCF) long-period fiber grating (LPFG) to the surrounding refractive index (SRI) are studied. The outer cladding of the DCF plays the role of the overlay, thus, the mode transition (MT) phenomenon of DCF can be induced by etching the outer cladding radius instead of coating overlays. The response characteristics of the effective refractive index (ERI) of the cladding mode to the outer cladding radius are analyzed. It is found that in the MT range, the change rate of ERIs of cladding modes is relatively larger than that for other ranges. Further, based on the features of the mode transition region (MTR), the phase-matching curve of the 11^th cladding mode is investigated, and the response of the DCF-LPFG to the SRI is characterized by the change of wavelength intervals between the dual peaks under different outer cladding radii. The numerical simulation results show that the SRI sensitivity is greatly improved, which is available to 3484.0 nm/RIU with the fitting degree 0.998 in the SRI range of 1.33-1.37. The proposed DCF-LPFG can provide new theoretical support for designing the DCF-LPFG refractive index sensor with excellent performances of sensitivity, linearity and structure.

• Current Optics and Photonics
• /
• 제8권1호
• /
• pp.97-104
• /
• 2024

In aerial cameras, image quality is easily affected by weather, temperature, and the attitude of the aircraft. Aiming at this phenomenon, based on the theory of two-step zoom optical systems, a dual-band optical-despun two-step zoom optical system is designed. The system has a small field of view of 2.00° × 1.60°, and a large field of view of 4.00° × 3.20°. In the zoom process, the wavelength range is 0.45-0.70 ㎛ and 0.75-1.10 ㎛, and the size of the optical system is 168 mm (L) × 90 mm (W) × 60 mm (H). The overall lens weight is only 170.8 g, which has advantages for miniaturization and light weight. At the Nyquist frequency of 104 lp/mm, the modulation transfer function of the visible-light optical system is more than 0.44, and that of the near-infrared optical system is more than 0.30, both of which have good imaging quality and tolerance characteristics in the range of -45 to 60 ℃.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.27-30
• /
• 2002

PMFBG sensor was fabricated using phase mask and Excimer laser. The reflected wavelength of PMFBG sensor had dual peaks due to intrinsic birefringence. To discover the polarization axes, peak sensitivity was measured under compression test. The signal characteristics of PMFBG sensor were also examined in embedding condition. The embedded PMFBG sensor in epoxy block was loaded for the transverse strain measurements. Experiments showed that the PMFBG sensor could successfully measure the transverse strain. This PMFBG sensor is useful for the structures that require measuring transverse stram.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.88-89
• /
• 2007

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.624-629
• /
• 2018

본 논문은 NDIR(Non Dispersive Infra Red) 방식을 적용하여 $CO_2$ 및 $CH_4$의 두 가지 가스를 하나의 휴대용 장치에서 측정이 가능하도록 제작된 복합 가스 측정 장치에 대한 연구이다. 측정 장치의 구성은 적외선램프에서 적외선이 방출되면 방출된 파장이 광학창을 거치면서 흡수로 인하여 빛이 줄어들게 되고 이 감소량(흡수도)을 검출기에서 검출하고 이를 전기적 신호로 변환 증폭하여(3.5V~6V) 정확한 측정이 가능함을 보여준다. 기존의 Single Sensor 방식은 적외선에서 특수파장을 흡수하여 상대 측정량을 검출하는 방식으로 가스의 경우 $4.26{\mu}m$파장의 빛만을 검출하여 측정하는 방식으로 센서의 값을 보정할 수 있는 기준센서가 없어 오차가 발생하는 문제가 발생하였다. 본 연구에 적용된 Dual Sensor 방식은 다른 가스의 영향을 받지 않는 $3.91{\mu}m$의 기준치와 가스의 $4.26{\mu}m$의 두 파장을 검출하여 비교측정 함으로써 오차가 적어 신뢰도가 높은 방식으로, 휴대형으로 소형화하여 저 전력화가 가능하며, $CO_2$ 및 $CH_4$의 2가지 가스농도를 복합적으로 측정 할 수 있다는 특징이 있다. 측정 범위는 $CO_2$의 경우 0ppm~5,000ppm이고 $CH_4$의 경우는 0~5%의 부피 농도로 실내 공기량 1,000ppm을 측정 할 수 있도록 제작되어 휴대용이나 주택의 Home automation과 연동하여 소화연동이 가능함으로 화재예방에 매우 효과적일 것으로 확인하였다.

• 대한의용생체공학회:의공학회지
• /
• 제44권6호
• /
• pp.450-464
• /
• 2023

Pulse oximetry, a non-invasive technique for evaluating blood oxygen saturation, conventionally depends on isolated measurements, rendering it vulnerable to factors like illumination profile, spatial blood flow fluctuations, and skin pigmentation. Previous efforts to address these issues through imaging systems often employed red and near-infrared illuminations with distinct profiles, leading to inconsistent ratios of transmitted light and the potential for errors in calculating spatial oxygen saturation distributions. While an integrating sphere was recently utilized as an illumination source to achieve uniform red and near-infrared illumination profiles on the sample surface, its bulkiness presented practical challenges. In this work, we have enhanced the pulse oximetry imaging system by transitioning illumination from an integrating sphere to a multi-wavelength LED configuration. This adjustment ensures simultaneous emission of red and near-infrared light from the same position, creating a homogeneous illumination profile on the sample surface. This approach guarantees consistent patterns of red and near-infrared illuminations that are spatially uniform. The sustained ratio between transmitted red and near-infrared light across space enables precise calculation of the spatial distribution of oxygen saturation, making our pulse oximetry imaging system more compact and portable without compromising accuracy. Our work significantly contributes to obtaining spatial information on blood oxygen saturation, providing valuable insights into tissue oxygenation in peripheral regions.

• 한국ITS학회 논문지
• /
• 제14권5호
• /
• pp.38-43
• /
• 2015

본 논문에서는 마이크로스트립 패치 안테나의 방사개구면에 역 L형 기생소자를 수직으로 세운 이중대역 마이크로스트립 안테나를 설계 및 제작하였다. 제안된 안테나는 GPS $L_1(1.575 GHz)$과 $L_2(1.227 GHz)$ 대역을 수용하도록 설계하였다. 먼저, GPS $L_1$ 대역은 반파장 마이크로스트립 패치 안테나를 이용하여 수용하였고, 섭동법을 이용하기 위해 방사개구면에 수직으로 세워 역 L형 기생소자를 패치안테나와 커플링시켜 공진시킴으로써 GPS $L_2$ 대역을 수용하였다. 다음으로 두 대역에서 모두 원형편파를 발생시키기 위해서 급전점 반대편 방사개구면에 각각의 편파에 해당하는 방사개구면에 역 L형 기생소자를 각각 세웠고, 패치 안테나의 급전점을 대각선으로 옮겨 이중대역 원형편파 마이크로스트립 안테나를 설계하였다. 이렇게 설계된 원형편파 안테나의 크기는 $88.5{\times}79{\times}10.4mm^3$ ($0.36{\lambda}_L{\times}0.32{\lambda}_L{\times}0.04{\lambda}_L$, ${\lambda}_L$은 1.227 GHz의 공기 중 파장)의 크기를 가지며, 단층으로 저자세를 유지한다. -10 dB 대역폭은 GPS $L_1$대역에서 116.3 MHz(7.4%), GPS $L_2$대역 64.3 MHz(5.2%)로 측정되어 GPS $L_1$과 $L_2$ 대역의 요구대역폭(각각 24 MHz)을 만족하였다. 3 dB 축비 대역폭은 11.7 MHz(0.74%)와 14 MHz(1.14%)로 각각 측정되었으며, 방사패턴은 두 대역에서 모두 브로드 사이드 방사패턴을 형성하였다.

• 한국전자파학회논문지
• /
• 제27권5호
• /
• pp.424-429
• /
• 2016

본 논문은 인공전송선로 중 하나인 LUC(Low-pass filter Unit Cell)을 이용한 이중모드 링-공진기 대역통과 여파기를 제안한다. 기존의 링 공진기 대역통과 여파기는 한 파장 링 공진기를 기반으로 설계하므로 소형화에 어려움이 있고, 정수배 파장의 고조파로 인한 원치 않는 동작의 문제점이 있다. 저역통과 특성을 지닌 인공전송선로 중 하나인 LUC를 이용하여 링-공진기를 구성함으로써 소형화와 고조파 저지 특성을 구현하였다. 링-공진기와 입력 및 출력 단의 인터디지탈 결합선로 인버터를 이용하여 2단 대역통과 여파기를 설계 및 제작하였다. 제작된 여파기는 이중모드, UWB 전 대역저지, 날카로운 스커트 특성을 나타냈으며, 기존의 링-공진기 대역통과 여파기의 링 면적을 약 60 % 감소시켰다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.305-310
• /
• 2015

We propose a new concept for a depth of interaction (DOI) positron emission tomography (PET) detector based on dual-ended-scintillator (DES) readout for small animal imaging. The detector consists of lutetium yttrium orthosilicate (LYSO) arrays coupled with orthogonal wavelength-shifting (WLS) fibre placed on the top and bottom of the arrays. On every other line, crystals that are 2 mm shorter are arranged to create grooves. WLS fibre is inserted into these grooves. This paper describes the design and performance evaluation of this PET detector using Monte Carlo simulations. To investigate sensitivity by crystal size, five types of PET detectors were simulated. Because the proposed detector is composed of crystals with three different lengths, degradation in sensitivity across the field of view was also explored by simulation. In addition, the effect of DOI resolution on image quality was demonstrated. The simulation results proved that the devised PET detector with excellent DOI resolution is helpful for reducing the channels of sensors/electronics and minimizing gamma ray attenuation and scattering while maintaining good detector performance.