• 한국컴퓨터산업학회논문지
• /
• 제2권12호
• /
• pp.1523-1532
• /
• 2001

탑헤드 모니터는 모니터 위의 상단부에 6.4인치 정도의 보조 모니터를 추가로 탑재한 두 화면 모니터이다. 이 시스템의 특징은 아래의 화면은 종전의 화면 기능을 그대로 수행하고 상단 부위의 보조화면은 인터넷 전용광고 및 컨텐츠 제공을 할 수 있는 배너 광고, 동영상 화면, 메일관리 아이콘, 웹폰 아이콘, 단축 아이콘 등이 배치되었고 이를 클릭 하면 아래의 모니터 화면과 연동하여 동작할 수 있다는 점이며 두 개의 모니터 화면은 종전의 방법 그대로 마우스와 키보드를 사용하여 제어할 수 있다.

• 한국정보통신학회논문지
• /
• 제5권7호
• /
• pp.1195-1203
• /
• 2001

탑헤드 모니터는 모니터 위의 상단부에 6.4인치 정도의 보조 모니터를 추가로 탑재한 두 화면 모니터이다. 이 시스템의 특징은 아래의 화면은 종전의 화면 기능을 그대로 수행하고 상단 부위의 보조화면은 인터넷 전용광고 및 컨텐츠 제공을 할 수 있는 배너 광고, 동영상 화면, 메일관리 아이콘, 웹폰 아이콘, 단축 아이콘 등이 배치되었고 이를 클릭 하면 아래의 모니터 화면과 연동하여 동작할 수 있다는 점이며 두 개의 모니터 화면은 종전의 방법 그대로 마우스와 키보드를 사용하여 제어할 수 있다.

• 전자공학회논문지
• /
• 제52권4호
• /
• pp.71-79
• /
• 2015

본 논문에서는 상호 정전용량 터치스크린의 single line sensing 방법에서의 단점을 해결하기 위한 성능향상 구조를 제안한다. 제안 구조는 Dual sensing 기법과 voltage shifting 기법을 도입하여 센싱 신호의 노이즈를 효과적으로 제거하고 터치 유무의 센싱 신호 차이를 증가시킨다. Dual sensing 기법은 구동신호의 양방향 엣지를 사용하여 integration 속도를 2배로 증가시켜 감지시간을 감소시킨다. Voltage shifting은 ADC의 입력신호 동작범위를 최대화하여 신호 대 노이즈비 (SNR)를 개선한다. 23" 대형 상용 터치스크린을 이용하여 simulation 및 측정한 결과로 제안된 센싱기법은 43dB의 SNR 성능을 가지며, 기존 방식 대비 2배의 스캔 속도를 제공하여 대형 터치스크린을 위한 적합한 기술임을 보인다. 제안된 센싱기법은 현재 매그나칩 CMOS 0.18um 공정으로 TSP 컨트롤러칩으로 구현되었다.

• 방사선산업학회지
• /
• 제9권3호
• /
• pp.137-141
• /
• 2015

A single-shot dual-energy x-ray imaging technique has been developed using a sandwich detector by stacking two detectors, in which the front and rear detectors respectively produce relatively lower and higher x-ray energy images. Each detector layer is composed of a phosphor screen coupled with a photodiode array. The front detector layer employs a thinner phosphor screen, whereas the rear detector layer employs a thicker phosphor screen considering the quantum efficiency for x-ray photons with higher energies. We have applied the proposed method into the inspection of printed circuit boards, and obtained dual-energy images with background clutter suppressed. In addition, the single-shot dual-energy method provides sharper-edge images than the conventional radiography because of the unsharp masking effect resulting from the use of different thickness phosphors between the two detector layers. It is promising to use the single-shot dual-energy x-ray imaging for high-resolution nondestructive testing. For the reliable use of the developed method, however, more quantitative analysis is further required in comparisons with the conventional method for various types of printed circuit boards.

• 한국인터넷방송통신학회논문지
• /
• 제12권3호
• /
• pp.163-169
• /
• 2012

안드로이드 플랫폼에서는 하나의 앱이 스크린 장치를 독점하기 때문에, 사용자는 동시에 2 개의 앱을 실행하여 각 앱이 실행되는 화면을 같이 볼 수 없다. 본 논문은 두 개의 안드로이드 단말기에서 쌍으로 실행될 필요가 있는 앱을 듀얼앱으로 정의하고, 이들을 각 단말기에서 실행 시키고 통신할 수 있는 듀얼 스크린 안드로이드 플랫폼, DSAP을 설계하고 구현한 내용을 기술한다. 하나의 앱이 실행되면 상대편 단말기에 피어 앱을 원격 실행시키고 이들이 서로 통신하면서 두 개의 스크린을 가진 하나의 앱인 것처럼 작동하게 한다. 본 논문에서는 DSAP의 프로토타입을 설계 구현한 내용과 DSAP의 응용 사례를 소개한다.

• 반도체디스플레이기술학회지
• /
• 제20권3호
• /
• pp.184-188
• /
• 2021

In general, digital signage is a next-generation smart media that provides various information and advertisement services to many people indoors or outdoors using the Internet. Recently, digital signage is rapidly spreading in such a small indoor environment, that is, in an area closely related to daily life, for example, inside an elevator. However, in this kind of indoor environment where the stay time of persons is extremely limited, it would be not easy for them to keep advertisements in the user memory for a long time. In the digital signage display installed in an indoor environment, it is possible to think about the possibility for a function such as expanding the screen to a user's smartphone, which is now widely spread, to contain, store, and use the transmitted content. In this paper, we propose a method to extend the display of digital signage contents to personal smart phones with interaction function in such a limited environment. In order to make the system operation, the proposed system was verified by confirming the result of dual screen implementation in a smart phone through the prototype implementation of a digital signage system in an embedded Linux environment.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1314-1319
• /
• 2017

A handheld sheet resistance meter that can easily and quickly measure the sheet resistance of indium tin oxide films was developed. The dual-configuration four-point probe method was adopted for this instrument, which measured sheet resistance in the range from $0.26{\Omega}/sq$. to $2.6k{\Omega}/sq$. with 0.3 % ~ 0.5 % uncertainty. The screen of the instrument displayed the sheet resistance when the probe was in contact with the sample surface and the value continued to be displayed during the probe contact. Even after separating the probe from the surface, the value was still displayed on the screen and could be read easily. A feature of the instrument was the use of the dual-configuration technique to reduce edge effects markedly compared with the single-configuration technique and its ease of operation without applying correction factors for sample size and thickness.

• 대한산업공학회지
• /
• 제40권3호
• /
• pp.267-274
• /
• 2014

The purpose of this study is to identify a relationship between the time taken and the characteristics of touch key for touch-screen-based in-vehicle information system (IVIS) and to suggest a new Fitts' law formula that is added a driving speed parameter. Many studies already have shown that Fitts' law is well fitted in various devices for primary tasks, but there is no study of Fitts' law for secondary task in dual-task situation. Fitts' law may not be applied to the secondary task as it is, because the secondary task performance can be affected by the amount of attention for the primary task. To verify this, we carried out an experiment that showed whether pointing task to touch-screen-based IVIS during driving is affected by driving speeds or not. In the experiment, 30 people were volunteered for participants and the participants carried out driving task and pointing task on the screen of IVIS simultaneously. We measured the time to point a touch key on IVIS for every condition (3 driving speeds${\times}5$ touch key sizes${\times}7$ distances between steering wheel and touch key). As a result, there was an effect of driving speed on the pointing time. As we extended the index of difficulty of the conventional Fitts' law formula by incorporating driving speed, we established an extended Fitts' law formula for pointing on IVIS, which showed better accordance with dual task situation. This study can be evidence that secondary task performance is affected by degree of concentration on primary task, and the extended Fitts' law formula can be useful to design interfaces of IVIS.

• 한국전기전자재료학회논문지
• /
• 제18권9호
• /
• pp.827-832
• /
• 2005

Dual band internal antennas were fabricated with Ag conducting paste of various preparation conditions and different print thickness by silk screen print. We have investigated microwave properties were compared Ag conducting paste antenna with copperplate antenna at 800 MHz and 1,800 MHz. Gain of Ag conducting paste antenna was improved when preparation conditions were the single size Ag particle, using dry type resin and high Ag containing percent. However, it was lower than that of copperplate antenna within $0.1\~2.0dBi$ at 800MHz. In addition, it was improved at 800MHz when thickness of Ag conducting paste was printed more than skin depth but it was held after critical print thickness. On the other hand, it was reached level of copperplate antenna at 1,800MHz.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.367-375
• /
• 1990

A data structure representing 3-D objects was designed for the personal computer. It is very simple to be used in the personal computers which have small memory and low speed. A homogeneous transformation for developing 3-D objects was derived. Each developing procedure consists of five transformations : one translational-three rotational-one translational. Developing a solid is a creative work. So the results of developing vary with the order of surfaces to be developed. One method to reduce the length of seam was considered. The programs used in this study were written in Pascal and Assembly and a modeller that generates 3-D primitives was included. This program is an interactive dual-screen system. While all the menus in Korean are displayed at the monochrome monitor, the development figures with projective views are drawn at the color monitor. The program has wide applications for plate works.