• 전기학회논문지
• /
• 제59권1호
• /
• pp.168-175
• /
• 2010

The issue of rejecting periodic disturbances arises in various applications dealing with rotating machinery. A new method using DIDF (Dual-Input Describing Function) is presented for the rejection of periodic disturbances with uncertain frequency. This can be added to an existing feedback control system without altering the closed-loop system stability. The objective is to design a nonlinear compensator to secure specified oscillation amplitude and frequency which are the same as disturbances. We suggest two procedures to determine coefficients for DIDF's synthesis. The structure of the proposed DIDF is so simple that we can easily synthesize. A number of computer simulations were carried out to demonstrate the salient feature of the proposed DIDF compared to the conventional ones(that is, adaptive algorithms).

• 전기학회논문지
• /
• 제58권4호
• /
• pp.655-664
• /
• 2009

This paper, Part 1, describes the effective dual-input PSS parameter design procedure for the IEEE Type PSS2A against the Dangjin 612 MVA thermal plant's EX2000 excitation system. The suggested tuning technique used the model-based PSS tuning method and consisted of three steps: 1) generation system modeling; 2) determination of PSS2A model parameters using linear, time-domain transient and 3-phase simultaneous analyses, and 3) field testing and verification, which are described in Part 2. The effective PSS2A model parameters of EX2000 system in the Dangjin T/P #4 were designed according to the suggested procedure, and verified by using three analyses.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.28-33
• /
• 1994

An optimal controller, e.g. LQG controller, may not be realistic in the sense that the required control power may not be achieved by existing actuators, and the measured output is not satisfactory. To be realistic, the controller should meet such constraints as sensor or actuator limitation, performance limit, etc. In this paper, the lnput/Output Variance Constrained (IOVC) control problem will be considered from the viewpoint of mathematical programming. A dual version shall be developed to solve the IOVC control problem, whose objective is to find a stabilizing control law attaining a minimum value of a quadratic cost function subject to the inequality constraint on each input and output variance for a stabilizable and detectable plant. One approach to the constrained optimization problem is to use the Kuhn-Tucker necessary conditions for the optimality and to seek an optimal point by an iterative algorithm. However, since the algorithm uses only the necessary conditions, the convergent point may not be optimal solution. Our algorithm will guarantee a sufficiency.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.189-192
• /
• 2001

A new phase-shifted parallel-input/series-output dual converter for high-power step-up applications has been proposed. It features a high efficiency due to the low switch turn-off voltage, low device stresses, low ripple contents, and a fast control-to-output dynamics compared to its PWM counterpart. To confirm the validity of the proposed converter, experimental results from an 800W, 350Vdc prototype are presented.

• 전자공학회논문지B
• /
• 제32B권6호
• /
• pp.899-908
• /
• 1995

In this paper, the probabilistic relations of dual morphological operations, such as dilation and erosion, closing and opening, and close- open and open-close, and the statistical properties for a continuous stationary lst order Gauss-Markov source are analyzed. The result is that the dual filters have symmetrical means and skews, and equal variances. Also, the statistics of morphological filters are very similar with those of input source, as correlation coefficient increases.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.708-712
• /
• 2001

A new phase-shifted parallel-input/series-output (PI SO) dual inductor-fed push-pull converter for high-power step­up applications is proposed. This converter is operated at a constant duty cycle and employs an auxiliary circuit to control the output voltage with a phase-shift between the two modules. It features a voltage conversion characteristic which is linear to changes in the control input, and high step-up ratio with a greatly reduced switch turn-off stress resulting in a significant increase in the converter efficiency. It also shows a low ripple content and low root-mean-square (RMS) current in the output capacitor. The operational principle is analyzed and a comparative analysis with the conventional pulse-width-modulated (PWM) PISO dual inductor-fed push-pull converter is presented. A 50kHz, 800W, 350Vdc prototype with an input of 20-32Vdc has also been constructed to validate the proposed converter. The proposed converter compares favorably with the conventional counterpart and is considered well suited to high-power step-up applications.

• Journal of Welding and Joining
• /
• 제29권5호
• /
• pp.99-105
• /
• 2011

In this study, effect of Si content on nugget diameter in electric resistance spot welded dual-phase(DP) steel was investigated. The cold rolled DP steels with different Si content (0.5, 1.0, 1.5, 2.0 wt.%) were used and thickness of those sheet was 1.2mm. With increasing Si content, nugget diameter was increased at the same welding current. This is attributed to increase of heat input result from high resistivity. Also, nugget diameter was increased with an increase in Si content for the same heat input. For this reason, the melting point of DP steel is lowered with an increase in the Si content. And solid DP steel can easily be transformed to a liquid phase because the low melting point. Finally, a prediction formula for the nugget diameter(N.D.) could be obtained in terms of heat input(Q) and melting point(M.P) as follows: N.D.(mm) = 0.11Q(J) - 0.0031 M.P.($^{\circ}C$) + 0.32.

• International Journal of CAD/CAM
• /
• 제11권1호
• /
• pp.18-26
• /
• 2011

This paper proposes a new solid-shape modeling system based on a lusterware-image illustration. The proposed method reconstructs a three dimensional solid shape from a set of rough sketches that are typically drawn in the early stages of the design process. The sketches do not have to be strictly accurate, and this tolerance to the roughness of the input sketches is one of the major advantages of the proposed method. The proposed system creates an initial shape based on the silhouette of the input lusterware-images. Then the user can edit the initial shape with intuitive cutting and dishing-up operations, which are based on sketching user interface. To achieve the goal, the system retains the geometric model with two representations: a point-set data and a volume data. This dual data structure allows the program to create an initial shape from the input images with little computational cost, and the user can apply cutting and dishing-up operations without substantially increasing computational and memory requirements. In this research, we have tested the proposed system by reconstructing solid models of some mechanical parts from rough sketches. The experimental results indicate that the proposed method is useful for the prototyping of a solid shape.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1433-1444
• /
• 2017

A family of non-isolated DC-DC three-port converters (TPCs) that allows for a more flexible power flow among a renewable energy source, an energy storage device and a current-reversible DC bus is introduced. Most of the reported non-isolated topologies in this area consider only a power consuming load. However, for applications such as hybrid-electric vehicle braking systems and DC microgrids, the load power generating capability should also be considered. The proposed three-port family consists of one unidirectional port and two bi-directional ports. Hence, they are well-suited for photovoltaic (PV)-battery-DC bus systems from the power flow viewpoint. Three-port converters are derived by combining different commonly known power converters in an integrated manner while considering the voltage polarity, voltage levels among the ports and the overall voltage conversion ratio. The derived converter topologies are able to allow for seven different modes of operation among the sources and load. A three-port converter which integrates a boost converter with a buck converter is used as a design example. Extensions of these topologies by combining the soft-switching technique with the proposed design example are also presented. Experiment results are given to verify the proposed three-port converter family and its analysis.

• 항공우주기술
• /
• 제4권2호
• /
• pp.21-26
• /
• 2005

전기체 구조시험 및 일반적인 구조시험과 관련된 시험장비는 유압 작동기를 제어하는 제어장치와 스트레인게이지 및 관련센서의 데이터를 수집할 수 있는 데이터 획득 장치로 구분될 수 있다. 비행체 구조 시험은 많은 수의 제어채널 및 데이터 획득 채널이 요구되며 채널 수의 증가에 따른 하드웨어의 자원도 많이 소요된다. 특히 많은 수의 제어채널을 가진 구조시험을 수행하여 오면서 하드웨어의 문제점들이 조금씩 나타나는 현상을 발견 할 수 있었는데 대부분의 경우 시험 장비의 교정 확인 방법을 통해서 해결할 수 있었다. 본 논문에서는 비행체 구조시험 장비(MTS Aero90)의 서보 제어 장치중의 일부인 다기능 입출력 프로세서(Multifunction Input Output Processor)와 로드셀 신호처리 보드(497.22 Dual DC Conditioner)에 대한 교정 확인 방법에 대하여 기술하였다.