• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.5-11
• /
• 2006

This paper is launched to get an exact bore-sighting value in the process of assembling for a dual-barrel weapon. Image processing method with a CCD(Charged Coupled Device) camera is chosen for the error reduction of bore-sighting. The results of this method by using a CCD camera and the testing target method are described in this paper. After the performance of the dual-barrel weapon and that of the fire-control system in the dual barrel weapon system is confirmed, the bore-sighting which is a part of the process in the system assembly is accomplished. In this process, the position of the barrel is identified by using the testing target method that is an existing bore-sighting method. Then, the fixing line of the fire-control system is checked by a day-optical part. The precision of the bore-sighting is required within several mils, however the manual method using the naked eyes makes it worse. Therefore, a CCD camera is installed in the eyepieces. Next, we can get an image of the sighting and the center coordinate values of the laser-pointer from each barrel by image processing method. A required bore-sighting value is calculated from the eccentricity of the center coordinate. Finally, It can be applied to adopt this result in the assembling process of the dual-barrel weapon.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.333-338
• /
• 2006

This study is a research on Dual Bore heat pipe to investigate the ability of heat transport ability, heat resistance and difference of heat transport ability according to the type of heat pipes. As the result of this research, we got several conclusions. Each pipe of Dual Bore in one section has a similar heat transfer capability. In the range between $-20^{\circ}C$ and $60^{\circ}C$ the heat transfer capability is double than single bore which was analyzed by menas of GAP program. Heat resistance is below $0.05^{\circ}C$/W at every point, and it tells aluminum-ammonia heat pipes are proper for satellite.

• 한국전자파학회논문지
• /
• 제28권5호
• /
• pp.355-365
• /
• 2017

본 논문에서는 간접급전 패드를 이용한 이중 대역 GPS 패치 안테나를 제안하였다. 제안된 안테나는 GPS L1 대역에서 공진하는 상부패치, L2 대역에서 공진하는 하부패치, 중간층에 위치하는 2개의 간접급전 패드로 구성되며, 광대역 원형 편파 특성구현을 위해 하이브리드 칩커플러를 사용하여 두 급전 포트 사이에 $90^{\circ}$의 위상차를 갖도록 급전하였다. 제안된 개별 안테나의 측정 결과, 전면 방향 이득은 GPS L1, L2 대역에서 각각 3.0 dBic, 5.1 dBic를 나타내며, 축비 특성은 각각 3.3 dB, 0.3 dB를 나타내는 것을 확인하였다. 제안된 안테나를 동일한 유전체 기판 가장자리에 7소자 배열하여 제작하여 active element pattern을 측정한 결과, 전면 방향 이득은 GPS L1, L2 대역에서 각각 -0.4 dBic, -2.4 dBic를 나타내어 GPS 배열안테나의 개별 소자로 사용 가능함을 확인하였다.

• Journal of Radiation Protection and Research
• /
• 제45권4호
• /
• pp.171-177
• /
• 2020

Background: This study aims to determine the effective atomic number (Zeff) from dual-energy image sets obtained using a conventional computed tomography (CT) simulator. The estimated Zeff can be used for deriving the stopping power and material decomposition of CT images, thereby improving dose calculations in radiation therapy. Materials and Methods: An electron-density phantom was scanned using Philips Brilliance CT Big Bore at 80 and 140 kVp. The estimated Zeff values were compared with those obtained using the calibration phantom by applying the Rutherford, Schneider, and Joshi methods. The fitting parameters were optimized using the nonlinear least squares regression algorithm. The fitting curve and mass attenuation data were obtained from the National Institute of Standards and Technology. The fitting parameters obtained from stopping power and material decomposition of CT images, were validated by estimating the residual errors between the reference and calculated Zeff values. Next, the calculation accuracy of Zeff was evaluated by comparing the calculated values with the reference Zeff values of insert plugs. The exposure levels of patients under additional CT scanning at 80, 120, and 140 kVp were evaluated by measuring the weighted CT dose index (CTDIw). Results and Discussion: The residual errors of the fitting parameters were lower than 2%. The best and worst Zeff values were obtained using the Schneider and Joshi methods, respectively. The maximum differences between the reference and calculated values were 11.3% (for lung during inhalation), 4.7% (for adipose tissue), and 9.8% (for lung during inhalation) when applying the Rutherford, Schneider, and Joshi methods, respectively. Under dual-energy scanning (80 and 140 kVp), the patient exposure level was approximately twice that in general single-energy scanning (120 kVp). Conclusion: Zeff was calculated from two image sets scanned by conventional single-energy CT simulator. The results obtained using three different methods were compared. The Zeff calculation based on single-energy exhibited appropriate feasibility.

• 한국전자파학회논문지
• /
• 제20권7호
• /
• pp.664-672
• /
• 2009

본 논문에서는 다중 선로를 로딩시킨 새로운 구조의 글래스 안테나를 설계하였다. 제안된 안테나는 광대역 주파수 특성을 얻기 위하여 중심 선로에 다중 선로를 로딩하였으며, 수직 편파 복사 이득을 개선하기 위하여 이중 중심 선로 구조를 채택하였다. 세부적인 설계 변수는 Pareto 유전자 알고리즘을 이용하여 최적화하였으며, 이러한 설계 변수를 바탕으로 글래스 안테나를 실제 차량 유리에 인쇄한 후 측정하였다. 측정 결과, T-DMB 중심 주파수를 기준으로 49 %의 반전력 대역폭과 -3 dBi 이상의 전면 방향(bore- sight direction) 수직 편파 복사 이득, azimuth 방향에서 평균 -10 dBi 이상의 수직 편파 복사 이득을 보였다.

• 한국전자파학회논문지
• /
• 제25권6호
• /
• pp.628-636
• /
• 2014

본 논문은 재밍 대응 위성 항법 장치의 5소자 평면 배열 안테나 설계에 대해 기술한다. GPS $L_1/L_2$ 대역에서 공진하는 적층 구조의 패치 안테나 설계를 제안한다. 제안된 안테나는 광대역 및 원형 편파 특성을 구현하기 위해 칩 커플러를 이용한 이중 급전을 사용한다. 배열안테나 측정 결과, 중앙안테나의 전면 방향 이득은 $L_1$과 $L_2$ 대역에서 각각 1.10 dBic, 0.37 dBic, 측면안테나는 $L_1$과 $L_2$ 대역에서 0.99 dBic, -0.57 dBic를 갖는다. 고각 $30^{\circ}$에서 방위각의 이득은 중앙안테나 $L_1$과 $L_2$ 대역에서 평균 -2.08 dBic, -5.33 dBic의 측정 결과를 갖는다. 측면안테나는 $L_1$과 $L_2$ 대역에서 평균 -0.40 dBic, -2.09 dBic의 측정 결과를 갖는다. 제안된 5소자 평면 배열 안테나는 GPS 재밍 대응 장치에 적합함을 확인한다.

• 한국전자파학회논문지
• /
• 제24권7호
• /
• pp.678-685
• /
• 2013

본 논문에서는 하이브리드 급전 구조를 가지는 이중 대역 GPS 패치 안테나를 설계하였다. 설계된 개별 안테나는 GPS 배열 안테나로 사용되며, 배열에서 개별 안테나의 방향을 조절하여 패턴 왜곡 및 간섭을 최소화하였다. 제안된 안테나는 GPS $L_1$(1.5754 GHz), $L_2$(1.2276 GHz) 대역에서 각각 공진하는 2개의 방사 패치를 가지고 있으며, 광대역 및 원형 편파 특성을 구현하기 위해 칩 커플러를 이용한 2-포트 급전 방법을 사용하였다. 설계된 개별 안테나를 각각의 장착 위치에서 네 방향(${\phi}=0^{\circ}$, ${\phi}=90^{\circ}$, ${\phi}=180^{\circ}$, ${\phi}=270^{\circ}$)으로 돌려가며 중앙 안테나와 가장 적은 패턴 왜곡과 간섭을 가지는 방향으로 안테나를 장착하였다. 배열 안테나 측정 결과, 중앙 안테나의 전면 방향 이득은 $L_1$과 $L_2$ 대역에서 0.3 dBic, -1.0 dBic, 측면 안테나의 전면 방향 이득은 $L_1$과 $L_2$ 대역에서 1.6 dBic, 1.0 dBic를 가지며, 이를 통해 제안된 배열 안테나가 이중 대역 GPS 배열 안테나로 사용 가능함을 확인하였다.

• Geomechanics and Engineering
• /
• 제29권2호
• /
• pp.145-154
• /
• 2022

Complex geological conditions have a great influence on the mining of coalbed methane (CBM), which affects the extraction efficiency of CBM. This investigation analyzed the complicated geological conditions in the Liujia CBM block of Fuxin. A geological model of heterogeneities CBM reservoirs was established to study the influence of strike direction of igneous rocks and fault structures on horizontal well layout. Subsequently, the dual-porosity and dual-permeability mathematical model was established, which considers the dynamic changes of porosity and permeability caused by gas adsorption, desorption, pressure change. The results show that the production curve is in good agreement with the actual by considering gas seepage in matrix pores in the model. Complicated geological structures affect the pressure expansion of horizontal wells, especially, the closer to the fault structure, the more significant the effect, the slower the pressure drop, and the smaller the desorption area. When the wellbore extends to the fault, the pressure expansion is blocked by the fault and the productivity is reduced. In the study area, the optimal distance to the fault is 70 m. When the horizontal wellbore is perpendicular to the direction of coal seam igneous rock, the productivity is higher than that of parallel igneous rock, and the horizontal well bore should be perpendicular to the cleat direction. However, the well length is limited due to the dense distribution of igneous rocks in the Liujia CBM block. Therefore, the horizontal well pumping in the study area should be arranged along the direction of igneous rock and parallel plane cleats. It is found that the larger the area surrounded by igneous rock, the more favorable the productivity. In summary, the reasonable layout of horizontal wells should make full use of the advantages of igneous rock, faults and other complex geological conditions to achieve the goal of high and stable production.

• 대한조선학회논문집
• /
• 제51권3호
• /
• pp.212-219
• /
• 2014

As subsea production has been revived up, the demand of subsea equipment has also been increased. Among the equipment, subsea tree plays a major role in safety. The tubing hanger is one of the most important components in subsea tree. In this study structural reliability analysis on dual bore tubing hanger of subsea tree is performed. The target reliability which is introduced in ISO regulation is used for judging whether tubing hanger is safe or not. The considered loads are working pressure, working temperature and suspended tubing weight. Thermal-stress analysis on tubing hanger is performed and kriging model is created based on the results of FEM analysis. According to von Mises criterion, limit state equation can be estimated. Reliability analysis is performed by using level 2 method and the result is verified by that of Monte Carlo Simulation. For finding most probable failure point, enhanced HL-RF method is adopted. Because the reliability of model doesn't reach target reliability, an improvement measure should be considered. Thus, it is suggested to change the material of tubing hanger main body to AISI 4140.