• Title/Summary/Keyword: Drying temperature

Search Result 1,492, Processing Time 0.028 seconds

Simulation of Drying Grain with Solar-Heated Air (태양에너지를 이용한 곡물건조시스템의 시뮬레이션에 관한 연구)

  • Keum, Dong-Hyuk
    • Journal of Biosystems Engineering
    • /
    • v.4 no.2
    • /
    • pp.64-64
    • /
    • 1979
  • Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well.2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air.3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying.4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis.5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time.6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture.7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation.8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise.11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss.12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method.13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated.Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year.14. Required fan horsepower and energy for the intermittent fan operation were3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation.15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use.16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.

Monitoring of Quality Properties with Drying of Citrus (감귤의 건조에 따른 품질특성 모니터링)

  • 이기동;윤성란
    • Food Science and Preservation
    • /
    • v.10 no.4
    • /
    • pp.470-475
    • /
    • 2003
  • The response surface methodology was performed by central composite design for moisture content, titratable acidity, hunter's color value and organoleptic properties based on drying temperature and time of Citrus, to apply basic data to preparation of dried Citrus. Moisture content, b value and organoleptic color were affected by drying temperature ; That decreased with increase of drying temperature. Titratable acidity was affected by drying time. Organoleptic flavor and taste were affected by drying temperature and time. The optimum drying conditons for organoleptic taste were 67.56$^{\circ}C$ in drying temperature and 8.06 hr in drying time.

DRYING CHARACTERISTINCS OF THIN-LAYERS OF WHEAT AND BARLEY AT NEAR-AMBIENT TEMPERATURE

  • Sun, Da-Wen;J.J.Woods
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 1993.10a
    • /
    • pp.896-905
    • /
    • 1993
  • Thin-layers of wheat and barley are dried at near-ambient temperatures(3.5$^{\circ}C$ -5$0^{\circ}C$) in order to obtain the intrinsic drying data. The well established apparatus was modified to enable it to record all the sample weight data in still air by using a purpose -built automatically controlled sliding valve. The air could be diverted in less than 0.5seconds and a 7 second period was required to attain a steady weight reading. With this apparatus, very smooth drying curves were obtained. The data of sample weight , drying temperature and dew point temperature wee recorded continuously . The drying process was terminated when the moisture content change in 24 hours was less than 0.004 d.b. This was achieved by drying a sample for about a week . The final points were recorded as the dynamic equilibrium moisture content(EMC). The drying data were than fitted to the exponential Newton model and the dynamic EMC data were fitted to the Modified-Chung-Pfost Model . All the fitted parameters are given and comparison is made with previous published data. The comparisons who that the current drying constants are lower than the previous data, the dynamic EMC data obtained for wheat and barely agree with the previous data. The results show that to obtain the drying constant in the exponential Newton model, adequate drying time is necessary.

  • PDF

Development of a General Drying Model of Red Pepper (고추의 범용(汎用) 건조모형(乾燥模型) 개발(開發)에 관한 연구(硏究))

  • Cho, Y.J.;Koh, H.K.;Park, J.B.
    • Journal of Biosystems Engineering
    • /
    • v.16 no.1
    • /
    • pp.60-82
    • /
    • 1991
  • Drying process of red pepper is very important in terms of drying cost and quality of the end product. Recently, many studies on red pepper drying have been performed. Nevertheless, an optimum drying condition is not established yet. Drying characteristics of red pepper is much affected by drying factors such as variety and initial state of red pepper as well as by environmental drying factors such as temperature and relative humidity of drying air. Various varieties of red pepper are being cultivated and the initial state of red pepper at harvest is very ambiguous. For this reason, it is very costly and time-consuming to establish an optimum drying condition of red pepper by experiment. A general drying model to descirbe a drying process has not been developed due to diversity of drying characteristics of red pepper. This study was, therefore, performed to develop a general drying model describing a drying process of red pepper. The results from this study are summarized as follows. 1. A basic model was established to develop an appropriate mositure content model and temperature model describing a drying process of red pepper, and the basic model was validated with experimental data. 2. The bone dry weight of fruit and mositure content were accepted satisfactorily as parameter to define the arbitrary red pepper. 3. The equilibrium moisture content of red pepper was found out to be different according to the variety of red pepper, air temperature and relative humidity. Also, the EMC model was developed using the parameters of air temperature, relative humidity and bone dry weight of fruit. 4. A general drying model for red pepper was developed, parameters of which were expressed as the function of drying factors related with drying phenomena. The developed drying model was found out to describe well the drying process of red pepper.

  • PDF

High-Temperature Drying Characteristics of Wood during Boiling-In-Oil Process

  • Lee, Hyoung Woo;Choi, Nak Ju
    • Journal of the Korean Wood Science and Technology
    • /
    • v.35 no.5
    • /
    • pp.1-6
    • /
    • 2007
  • Boiling-in-oil process was performed to investigate the high-temperature drying characteristics of 25, 50, and 70 mm-thick flat-sawn Douglas-fir lumber. Drying rates, moisture profiles and temperature profiles were monitored. Fully refined paraffin wax was used as drying agent and heated to $130^{\circ}C$. Average drying rates of 25, 50, and 70 mm-thick specimen were 11.6, 6.7, 5.0%/h, respectively. The moisture content differences between cores and ends were 1~2% in 25 mm-thick and 200 mm-long sample and over 10% in 50 mm-thick and 600 mm-long sample.

Changes in Days to Drying and Some Chemical Components by Different Drying Methods in Paeoniae radix (건조방법에 따른 작약근 건조 소요일수 및 성분 변화)

  • ;Kwang-He Kang
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.41 no.3
    • /
    • pp.362-369
    • /
    • 1996
  • Seven different drying methods were tested in peony roots of Euisung cultivar, harvested in February, in three year's old plant. The roots were selected in length and diameter and half of the samples were removed cork-layers to compare the effects of cork-layer in processing of drying. The 3$0^{\circ}C$ heat drying without cork-layer reduced in days to drying by five days compared to those of the with cork-layers at the same temperature. The 5$0^{\circ}C$ heat drying after cork-layers removed was the most effective in days to drying. In quality of skin color of the 5$0^{\circ}C$ heating was worse to compare with the lower drying temperature. In the drying at room temperature and the heat drying at lower temperature, the paeoniflorin content in drying after cork-layers removed were higher than that of the drying with cork-layers. However, in the boiling water treatment, the paeoniflorin contents in drying after cork-layers removed were lower than those of with cork-layers. In heat drying, paeoniflorin content showed a decreasing tendency to increase of drying temperature. Total sugars in the peony roots showed a decreasing tendency according to the drying temperature increasing, but starch concentration showed a increasing tendency at the same condition. Concentrations of crude protein, crude fiber and crude ash were showed no differences in various drying methods and the materials with or without cork-layers. Relationships between the paeoniflorin and total sugars, and the paeoniflorin and starch were different significantly by the materials of cork-layers removed or not. The 30~4$0^{\circ}C$ heat drying without cork-layers was the most advisable condition for drying in paeoniflorin concentration, days to drying and skin color after drying.

  • PDF

Simulation Model for Drying Characteristics of Batch-type Tunnel Dryer (배치식 터널 건조기의 고추 건조 시뮬레이션 모델 연구)

  • 황규준;고학균;홍지향;김종순
    • Journal of Biosystems Engineering
    • /
    • v.25 no.2
    • /
    • pp.89-96
    • /
    • 2000
  • In this study, experiments were performed for various drying air temperatures, air flow rates tray distance to analyze drying characteristics of batch type tunnel dryer. In comparison of tunnel drying with cabinet drying which is currently used in the farm, the results of drying simulation model of cabinet dryer was used and then the possibility of applying the drying simulation model of cabinet dryer to batch type tunnel dryer was investigated. The results showed that as the drying temperature increased, the drying rte and moisture difference in the direction of air flow increased and as the air flow rate increased, the drying rate increased and moisture differences decreased. In tunnel dryer, drying through bottom of the tray had large effect on drying rate and the effect was more significant when the drying temperature increased. As air flow rate increased, the difference of drying rates between tunnel and cabinet drying increased and drying rate of tunnel of drying was higher. The drying simulation model could estimate moisture content in tunnel more precisely by using modified effective moisture diffusion coefficient for air flow rate.

  • PDF

Feasibility Study for Applying Desiccant to Low Temperature Vacuum Drying Process (저온진공건조 공정에 제습제 적용을 위한 타당성 연구)

  • Sim, Yeonho;Kang, Jisu;Byun, Siye;Chang, Young Soo;Kang, Byung Ha
    • Korean Journal of Air-Conditioning and Refrigeration Engineering
    • /
    • v.28 no.5
    • /
    • pp.208-215
    • /
    • 2016
  • This study was conducted to improve the performance of low-temperature vacuum dryer by applying desiccant to cold trap. Performance evaluation was carried out using several desiccants. The amounts of absorption and diffusivity were measured based on analytic model. Results of desiccant performance evaluation revealed that silica-gel had the most excellent performance for conditions of low-temperature vacuum drying process. Silica-gel was applied to cold trap for evaluating the drying performance. The experiment results showed that the drying time was extended as the thickness of sample was increased due to increased heat and mass transfer resistance of drying sample. In addition, as heating plate temperature was increased, drying time was decreased due to increased evaporation pressure of drying sample. Furthermore, drying time with desiccant was decreased approximately 20% than that without desiccant.

Drying Characteristics and Content Change of Major Components of Shiitake Mushroom (Lentinus erodes) 1. Drying Characteristics and Drying Model (표고버섯의 건조 특성 및 주요성분의 변화 1. 건조특성 및 건조모델)

  • Choe, Byeong-Min;Seo, Jae-Sin;Choe, Ju-Ho
    • Food Science and Preservation
    • /
    • v.4 no.3
    • /
    • pp.271-278
    • /
    • 1997
  • Drying of Shiitake mushroom was investigated to see the effect of temperature, relative humidity of drying air and diameter of the pileus on its rates. The drying rate was increased with the increase of the air temperature and the decrease of the relative humidity. The external color was dark brown at higher drying temperature and higher relative humidity. Exponential and Thompson nodel were found to describe well the raying process of the Shiitake mushroom.

  • PDF

A Study on Modelling for Prediction of Concrete Drying Shrinkage according to Aggregate Ratio of Concrete (잔골재율 변화에 따른 콘크리트 건조수축 모델링에 관한 연구)

  • Park, Do-kyong;Yoon, Yer-Wan;Kim, Kwang-Seo
    • Journal of the Korea Institute of Building Construction
    • /
    • v.4 no.4
    • /
    • pp.71-77
    • /
    • 2004
  • Drying Shrinkage has much complexity as it has relations with both internal elements of concrete and external factors. Therefore, experiments on Concrete Drying Shrinkage are carried out in this study under simplified circumstances applying temperature & Humidity test chamber which enables constant temperature and humidity. Comparative analyses have been made respectively according to the consequences aiming at modelling for prediction of Concrete Drying Shrinkage and making out measures to reduce it. Strain Rate of Drying Shrinkage of concrete under the condition of dry air appears to rise by about 20%-30% in proportion as the temperature rises $5^{\circ}C$ when the humidity was held below 10% compared under the condition of dry temperature & Humidity test chamber. Strain Rate of Drying Shrinkage in pit sand concrete increased 20% higher than measured when in river sand under the condition of 90-day material age. A general formula with two variables is derived as follow ${\varepsilon}={\alpha}_1+{\beta}_1x_1+{\beta}_2x_2+{\beta}_3x_1^2+{\beta}_5x_2^2$. and also graphed in 3 dimensions, enabling to apply to actual design and predict Strain Rate of Drying Shrinkage in concrete. The results of prediction of Rate of Drying Shrinkage by Response Surface Analysis are as follows. The coefficient of correlation of Drying Shrinkage in Concrete was over 90%.