• Journal of Mushroom
• /
• v.16 no.3
• /
• pp.131-139
• /
• 2018

The king oyster mushroom (Pleurotus eryngii) is widely consumed because of its flavor, texture, and its functional properties such as antioxidant activity and prebiotic effects. However, long-term product storage and transportation (e.g., export) are difficult because of its limited durability. The shelf-life of king oyster mushroom is affected by environmental factors such as temperature, humidity, gas composition, and ventilation, which may affect sensory characteristics including respiration rate, texture, moisture, flavor, color, and pH. The major problems regarding storage of mushrooms are browning, flavor changes, and softening. To address these problems, novel preservation techniques were developed, and more durable variants were bred. Different drying methods, gamma irradiation, chitosan coating, modified atmosphere (MA) packaging, and controlled atmosphere (CA) storage were evaluated in order to extend the shelf-life of king oyster mushrooms. Freeze drying showed better results for the preservation of mushrooms than other drying methods. Irradiation with 1 kGy was more effective for extending mushroom shelf-life than higher doses. The preservative performance of chitosan-based films was improved by combining the compound with other hydrocolloids, such as oil, protocatechuic acid, and wax. The CA storage conditions recommended for king oyster mushrooms are 5kPa $O_2$ and 10 to 15kPa $CO_2$ at temperatures below $10^{\circ}C$. Active MA packaging with microperforated PP film was also effective for maintaining quality during storage.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.47-54
• /
• 2024

In current slope stability analysis techniques, slope stability is evaluated based on the saturated-soil theory. However, soil-water characteristics change frequently depending on the climate. Therefore, because the saturated soil theory has limitations, the application of the unsaturated soil theory is necessary for slope stability. It is also important to evaluate the engineering properties of unsaturated soil because the capillary absorption capacity is reduced due to heavy rain, thereby causing a reduction in slope stability. In this study, soil-water characteristic tests were performed using four samples with different fine contents (0%, 10%, 20%, and 30%) using granite-weathered soil in domestic production areas. In particular, to consider the previously conducted drying process as well as the evaluation of stability due to heavy rain on the actual slope, a wetting process was conducted, in which the water content was increased. In addition, the van Genuchten (1980) model, which is the most consistent theoretical equation for the experiment, was used with various theoretical equations, and the parameters were analyzed according to the fine content of the granite-weathered soil for the drying and wetting processes.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.416-416
• /
• 2016

Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.

• Journal of Life Science
• /
• v.8 no.1
• /
• pp.60-66
• /
• 1998

The mototic and meiotic chromosomal characteristics of ICR mice were investigated with G-and C-banding techniques. For the puposes, the chromosomal preparations were made with the modified air-drying method of Imal et al. Chromosomal analysis using testis could be observed mitotic as well as meitotic chromosomal behaviors, and the centromeric regions of all chromosomes including X chromosome were strongly stained in C-banded preparations. Nineteen autosomal bivalents and a single uniequal terminally associated X-Y bivalent in normal cells were observed during the late prophase and the metaphase of the meiosis I. The mean frequencies of previously dissociated X-Y chromosomes in the primary apermatocytes of the control group were 7.45%, but the frequencies of X-Y dissociation in the alkylating agents-treated group were about 3-4 times higher than that in the control group. Application of C-banding in meiotic stages could be certainly distinguish between vibalent type and univalents type of sex chromosomes.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.11
• /
• pp.3275-3279
• /
• 2014

A mass balance method for purity assessment of thermolabile organic reference materials was established by combining several techniques, including liquid chromatography with UV/VIS detector (LC-UV), Karl-Fischer (K-F) Coulometry, and thermal gravimetric analysis (TGA). This method was applied to three fluoroquinolones like enrofloxacin, norfloxacin and ciprofloxacin. LC-UV was used to analyze structurally related organic impurities based on UV/VIS absorbance spectra obtained in combination with LC separation. For all three organic reference materials, the UV/VIS spectra of the separated impurities were similar to that of the major component of the corresponding materials. This indicates that the impurities are structurally related to the respective reference material sharing common chromophores. Impurities could be quantified by comparing their absorbances at the wavelength of maximum absorbance (${\lambda}_{max}$). The water contents of the reference materials were measured by K-F Coulometry by an oven-drying method. The total inorganic impurities contents were assayed from ash residues in TGA analysis with using air as a reagent gas. The final purities estimated from results of those analytical techniques were assigned as ($99.91{\pm}0.06$), ($97.09{\pm}0.17$) and ($91.85{\pm}0.17$)% (kg/kg) for enrofloxacin, norfloxacin and ciprofloxacin, respectively. The assigned final purities would be applied to the reference materials which will be used as calibrators for the certification of those compounds in matrix CRMs as starting points for the traceability of their certified values to SI units.

• The Korean Journal of Zoology
• /
• v.8 no.1
• /
• pp.11-14
• /
• 1965

The object to this study is to identify the genus and species of the microfilariae which were recently found in the area of Youngju-Gun. THe identification of the microfilariae was made on the morphologicla aspects. 1. Blood samples were collected through vena punction from known microfilariae carriers living in the newly confirmed filaria endemic area of Youngju0Gun in Jyongsang Pukdo Province. Youngju-Gun is located in the mountainous central part of Korean Peninsula. 2. The following fixation and staining techniques were applied. (1) Fixation by drying in the air, followed by staining with Azeo or Giemsa. (2) Knott's fixation method (2% formalin), followed by staining with Azur II. 3. A comparative study of the body length of the microfilariae after different fixation and staining techniques were applied. (1) Knott's fixation method followed by staining with Azur II : average body length found was 28.4$\mu$. (2) Dry fixation followed by staining with Giemsa : average body length found was 209.4$\mu$. (3) Dry fixation followed by staining with Azeo : average body length found was 205.4$\mu$. 4. The locations of the different body cells were measured in 60 individuals of microfilariae in the wet preparation fixed by Knott's method and stained with Azur II. The distance of the different body cells to cephalic apex of microfilariae was measured and calculated as a percentage of the total body length. The average results are as follows : BNC , 3.04% ; N, 22.74%, EP, 31.4% ; EC, 37.77%, G1 cell , 67.94%; G2 cell, 73.54% : G3 cell , 75.55% ; G4 cell, 77.65% ; AP, 82.02%%. 5. As a result of the above findings the microfilariae found in the above mentioned area could be identified as Brugia malai(BRUG, 1927) BUCKLEY, 1960.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.237-245
• /
• 2021

PURPOSE. This study aimed to compare the microshear bond strength (µSBS) of dual-cure resin cement in CAD-CAM zirconia after different cleaning techniques. MATERIALS AND METHODS. Fifty discs of zirconia-based ceramic from Ivoclar Vivadent were embedded in acrylic resin. The discs were divided into five groups according to the cleaning methods used: Group 1: drying with spraying + sandblasting with Al₂O₃; Group 2: washed with water and dried with spraying + sandblasting with Al₂O₃;Group 3: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + zirconium oxide (Ivoclean); Group 4: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + potassium hydroxide (Zirclean); and Group 5: washed with distilled water and dried with spraying + sandblasting with Al₂O₃ + 1% NaClO. All of the groups were contaminated with artificial saliva for 1 minute and then cleaned. Statistical analyses were performed using ANOVA and Tukey's tests. RESULTS. There were statistically significant differences among all groups for µSBS (P < .05). The group treated with zirconium oxide (Group 3) showed the highest µSBS (18.75 ± 0.23 MPa). CONCLUSION. When applied to zirconia, the cleaning methods affected the bonding with resin cement differently.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.819-825
• /
• 2022

As the importance of national technical qualifications for hairdressers to verify qualifications and skills as a professional is increasing, it is time to improve achievement motivation and job attitudes through research on job attitudes perceived by hair designers toward hair practical tasks. As a result of studying the effect on the job attitude of a hairstylist working in a hair salon, it was found that blow-drying induced the hairstylist's job efficacy among the practical tasks for the hairdresser's hair national technology certification, and scalp scaling and shampoo were the job of the hairstylist. was found to induce satisfaction. Based on the research results, it is possible to present a variety of practical certification tasks with practicality that can be usefully applied to customers in various techniques in the beauty industry, rather than unrealistic practical techniques limited only to wigs. We want to induce improvement. In addition, I believe that this study will provide basic data for the development of various practical tasks to improve the achievement motivation of hair designers.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.3
• /
• pp.145-153
• /
• 2012

The aim of this study is to explore the possibility of re-cycling a waste material that is now produced in large quantities, while achieving an improvement of the mechanical properties and durability of the mortar. This study examines the mechanical properties and the durability parameters of mortars incorporating plastics bag wastes (PBW) as fine aggregate by substitution of a variable percentage of sand (10, 20, 30 and 40 %). The influence of the PBW on the, compressive and flexural strength, drying shrinkage, fire resistance, sulfuric acid attack and chloride diffusion coefficient of the different mortars, has been investigated and analyzed in comparison to the control mortar. The results showed that the use of PBW enabled to reduce by 18-23 % the compressive strength of mortars containing 10 and 20 % of waste respectively, which remains always close to the reference mortar (made without waste). The replacement of sand by PBW in mortar slows down the penetration of chloride ions, improves the behavior of mortars in acidic medium and improves the sensitivity to cracking. The results of this investigation consolidate the idea of the use of PBW in the field of construction.

• Journal of the Korean Society of Costume
• /
• v.58 no.8
• /
• pp.63-73
• /
• 2008

From the ancient Korea to the late Joseon Korean fur and leather had been preferred in and out of Korea for their good quality and excellent manufacturing skill. Since Unified Silla (A.D.676${\sim}$A.D.936) Korean fur and leather were manufactured divisionally by workmen specialized in materials and products, and such manufacturing process was succeeded to Goryeo and Joseon. Manufacturing of fur and leather was consisted of as follows: hunting and butchering - peeling - beating with a paddle and removing fat - oil manufacturing - drying - tanning, then cutting and sewing, and there was a special caring method. In order to make good fur and leather, each process of manufacturing needed particular techniques and all available methods were tried to have tender fur and leather by using smoking, excrement, lime, vegetable tannin and even cerebral liquid. And also required mouth-chewing and hand-pounding with a lot of time and of labor Keeping furs resilience and flexibility, sowing several skins together, even when the after-all-process skin was converted into clothes, was much more difficult than sewing fabric. Thus, the manufacturing cost was as much expensive as skin materials, and the volume of manufacturing of fur and leather was also limited. Therefore, fur and leather must have been popular for scarcity value in the manufacturing process, and this scarcity must have caused an extreme luxury of fur.