A large quantity of purified water sludge is generated in modern cities around the world. Dewatering is essential to reduce the volumes transported off-site for disposal. Traditionally employed methods such as solar drying methods are time-consuming. There are urgent demands for developing alternatives to dewater the sludge in a less time-consuming manner. In this paper, siphon method is proposed to dewater the high-water-content sludge with plastic drainage plate installed horizontally. A group of comparative tests are conducted to preliminarily investigate the dewatering behavior of the purified water sludge with siphon and solar drying methods, respectively. On the basis of the test results, the availability and effectiveness of the new method is verified. It may provide an innovative solution to treat the purified water sludge more effectively.
The study is to examine the drying shrinkage reducing method of mortar using organic shrinkage reducing agent. According to the experiment result, when 2% and 4% of organic shrinkage reducing agent were added, 40% and 50% of the shrinkage rate of mortar were obtained. Also, in the cracking test of plate-shape specimen, the usage of shrinkage agent 2% reduced about 60% of the total cracking length compare to total cracking length the usage of portland cement, the usage of shrinkage agent 4% was not happened crack until 90 days. Accordingly, the usage of shrinkage agent show good effect in prevention of crack.
본 연구에서는 지상재배 방법으로 대량생산이 가능해진 상황버섯을 차로 개발하기 위하여 용출성을 증대시킬 수 있는 가열 전처리 조건을 구명하고자 하였다. 이를 위해, 자연 건조한 상황버섯을 건조오븐과 hot plate에서 온도와 시간을 달리하여 가열 전처리하고 분쇄한 후 일정량을 티백에 넣어 열수 추출하고 용출성 변화를 흡광도, 건조 고형분 함량, 색도 등을 측정하여 알아보았다. 건조오븐에서 가열할 경우, $70^{\circ}C{\sim}80^{\circ}C$에서 30분 가열 전 처리한 시료의 흡광도 및 건조 고형분량이 가장 크게 증가하였다. 반면, hot plate를 이용할 경우, 건조오븐에서 가열 전 처리한 시료의 증가폭에는 미치지 못하지만 $90^{\circ}C$에서 20분 가열 전 처리한 시료의 흡광도 및 건조 고형분량이 크게 증가하였다. 상황버섯 차의 색도변화는 가열시간이 길어질수록 밝기와 적색도가 감소하고 황색도가 상승하였으며 건조오븐에서의 가열 전 처리가 hotplate에서와 비교하여 상대적으로 낮은 온도에서 먼저 나타난다. 건조오븐을 이용하여 가열 전 처리한 시료를 대상으로 관능검사를 실시한 결과 $70^{\circ}C$ 및 $80^{\circ}C$에서 30분 가열 전 처리한 상황버섯 차가 가열처리 하지 않은 것과 비교하여 종합적 기호도가 높게 나타났다. 결론적으로 건조오븐을 이용하여 $70{\sim}80^{\circ}C$에서 30분 가열 전 처리하는 것이 상황버섯 차의 용출성 증대 및 기호도 측면에서 가장 효율적인 방법으로 사료된다. 또한 일정기간 보관하면서 탁도를 측정한 결과 상황버섯 차가 보리차 및 옥수수차와 비교하여 보존성이 좋은 것으로 나타났다.
A basic proposal on the design of a grain drying and storage system was suggested for the bulk facilities of grain custody warehouses. A model square silo system was designed and developed on the basis of the proposal. A square silo system made of steel plate was developed with a stirring device, an automatic moisture meter and an auto-control system of PLC. Then, the developed square silo system was evaluated through drying experiments with rough rice. The square silo system could dry grains uniformly with a stirring device and an auto-control system regardless of grain depth. The developed square silo system can be well adapted for the bulk facilities of grain custody warehouses.
To determine the effects of various drying methods on the quality characteristics of beef jerky from low-valued cuts, Hanwoo beef shank muscles were either hot air-dried, shade-dried, or sun-dried. The physicochemical quality and microbiological safety of the Hanwoo beef jerky were analyzed during a storage of $25^{\circ}C$. Moisture content and water activity ($a_w$) of the samples decreased as the time period of storage increased, regardless of the drying condition (p<0.05). Shade-dried jerky showed higher $a_w$ compared to others after storage of 20 d (p<0.05). The pH value of hot air-dried jerky was higher than those of others (p<0.05). For color properties, sun-dried samples showed higher redness ($a^*$) and yellowness ($b^*$) compared with the properties of others (p<0.05). The hot air-dried jerky showed higher shear force values than the sun-dried or the shade-dried jerky after 10 and 20 d (p<0.05). However, the total plate counts (TPCs) of naturally dried jerky (shade and sundried) were higher than hot-air dried jerky after storage of 10 and 20 d (p<0.05). With regard to sensory properties, naturally dried jerky showed higher tenderness, juiciness, and overall acceptability scores than the hot air-dried jerky (p<0.05). In conclusion, although natural drying appears to be more susceptible to microbiological contamination than hot air-drying, the natural drying method seems to result in superior quality than the hot air drying method.
건축물(建築物)의 내장(內裝)에 많이 사용(使用)하고 있는 합판(合板)은 가열성(可燃性) 물질(物質)로서 각종(各種) 대형화재(大型火災)로 수발(受發)하여 많은 인명(人命)과 재산(財産)의 손실(損失)을 초래(招來)하고 있다. 따라서 이로 인(因)한 피해(被害)를 최대한(最大限)으로 줄이기 위(爲)하여, 내화합판제조(耐火合板製造)의 필요성(必要性)이 절실(絶實)히 요구(要求)되며 또한 내화합판제조(耐火合板製造)에서 우선적(優先的)으로 해결(解決)해야 될 합판(合板)의 재건조(再乾燥)에 관(關)해서 연구(硏究)할 필요(必要)가 있다고 생각한다. 본(本) 연구(硏究)에서는 3.5mm 얇은 5.0mm 두꺼운 합판(合板)에 Ammonium sulfate, Mono -ammonium phosphate, Di - ammonium phosphate, Borax - boric acid, Minalith 및 Water를 1, 3, 6 및 9 시간(時間)으로 처리하고 90, 120 및 $150^{\circ}C$ 등(等)으로 열판건조(熱板乾燥)를 실시한 후(後), 건조곡선(乾燥曲線), 건조율(乾燥率), 내화제(耐火劑)의 흡수율(吸收率), 비중(比重)(용적중(容積重)) 및 내화도(耐火度) 등(等)을 연구검토(硏究檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. (1) Borax-boric acid와 Minalith 처리시간(處理時間)이 증가(增價)함에 따라 양액(藥液) 흡수량(吸收量)율(率)이 증가(增加)하는 경향(傾向)이 뚜렷이 하였으나 수분처리(水分處理) 흡수량(吸收量)율(率)에는 미치지 못 하였다. (2) 합판(合板)의 단위용적당(單位容積當) 약액(藥液) 흡수량(吸收量)은 일정시간(一定時間)의 처리(處理)에 있어서 두께 3.5mm의 얇은 합판(合板)이 두께 5.0mm의 두꺼운 합판(合板)보다 높았으며 가장 높은 흡수량(吸收量)은 두께 3.5mm의 얇은 합판(合板)에서 9시간(時間)을 처리(處理)하였을 때 Ammonium sulfate에서 1.353kg/$(30cm)^3$의 치(値)를 나타내었고 두께 5.0mm의 두꺼운 합판(合板)에서는 역시(亦是) 9시간(時間)의 처리(處理)에서 Ammonium sulfate의 1.356kg/$(30cm)^3$의 치(値)를 얻었다. (3) 약액처리(藥液處理) 후(後)의 합판(合板)의 용적중(容積重)은 처리(處理) 전(前)보다 뚜렷하게 상승(上昇)하였으나 열판건조(熱板乾燥) 후(後)에는 다시 용적중(容積重)의 치(値)가 하락(下落)하였는데 약액처리(藥液處理) 전(前)보다는 약간 높은 경향(傾向)을 나타내었다. (4) 약액처리합판(藥液處理合板)의 두께팽창율(膨脹率)은 두께 3.5mm의 얇은 합판(合板)과 두께 5.0mm의 두꺼운 합판(合板)에서 모두 1시간(1時間)과 3시간(時間) 처리(處理)에서 팽창율(膨脹率)의 증가(增加)가 수분처리(水分處理)와 비슷한 경향(傾向)을 보였으나 처리시간(處理時間)이 6시간(時間) 이상(以上)으로 연장(延長)되면서 약액처리합판(藥液處理合板)보다 수분처리합판(水分處理合板)의 두께 팽창율(膨脹率)이 급상승(急上昇)하여 뚜렷하게 높은 치(値)를 나타내었는데 두께 5.0mm의 두꺼운 합판(合板)에서 더욱 큰 치(値)를 보였다. (5) 열판건조(熱板乾燥) 후(後)의 두께 수축율(收縮率)도 팽창율(膨脹率)과 똑같은 경향(傾向)을 나타내었으며 두께 5.0mm의 합판(合板)에서는 약액처리시간(藥液處理時間)이 증가(增加)함에 따란 수축율(收縮率)이 뚜렷하게 상승(上昇)하는 경향(傾向)을 모든 처리약액(處理藥液)과 수분처리(水分處理)에서 나타내었다. (6) 건조곡선(乾燥曲線)은 1시간(時間)과 3시간(時間)의 처리(處理)를 제외(除外)하고 두께에 관계(關係)없이 6시간(時間) 이상(以上)의 처리(處理)에서 모두 수분처리합판(水分處理合板)의 건조곡선(乾燥曲線)이 약액처리합판(藥液處理合板)의 곡선(曲線)보다 상위(上位에 위치(位置)하였다. (7) 처리합판(處理合板)의 두께에 따른 건조율(乾燥率)은 두께 3.5mm의 얇은 합판(合板)의 경우(境遇), 두께 5.0mm의 두꺼운 합판(合板)에서 얻은 건조율(乾燥率)보다 거의 두 배(倍) 이상(以上)의 치(値)를 나타내어 얇은 합판(合板)이 두꺼운 합판(合板)보다 건조효과(乾燥效果)가 뚜렷하게 높았다. (8) 건조온도(乾燥溫度)에 따른 건조율(乾燥率)은 열판온도(熱板溫度)가 상승(上昇)함에 따라 뚜렷하게 상승(上昇)하였으며 두께 3.5mm의 얇은 합판(合板)의 경우(境遇) 열판온도(熱板溫度) 90, 120 및 $150^{\circ}C$에서 각각(各各) 1.226%/min., 6.540%/min., 25.752%/min, 였고 두께 5.0mm의 두꺼운 합판(合板)에서는 각각(各各) 0.550%/min, 2.490%/min., 8.187%/min.를 나타내었다. (9) 약액별(藥液別) 건조율(乾燥率)은 열판온도(熱板溫度) $120^{\circ}C$로 건조(乾燥)하였을 때 두께 3.5mm의 얇은 합판(合板)에서 Mono-ammonium phosphate가 가장 높은 경향(傾向)을 나타내었고 두께 5.0mm의 두꺼운 합판(合板)에서는 Di-ammonium phosphate가 가장 높은 경향(傾向)을 나타내었으나 처리시간(處理時間) 6기간(時間) 이후(以後)에는 수분처리합판(水分處理合板)의 건조율(乾燥率)이 더 높았다. (10) 약액처리합판(藥液處理合板)의 내화도(耐火度)는 측정(測定)된 중량감소율(重量減少率), 착염시간(着炎時間), 잔염시간(殘炎時間), 이면(裏面)의 탄화율(炭火率)을 통(痛)하여 수분처리합판(水分處理合板)이나 미처리합판(未處理合板)보다 뚜렷하게 높았다. (11) 내화약제간(耐火藥劑間) 내화효과(耐火效果)는 Di-ammonium phosphate가 가장 우수(優秀)하였고 다음은 Mono-ammonium phosphate와 Ammonium sulfate이며 Borax-boric acid와 Minalith는 가장 불량(不良)하였다.
일반적으로 도로의 하부인 노상층은 불포화토 상태로 존재하기 때문에 함수비의 변동을 예측하기 위해서는 불포화 함수특성곡선(soil-water characteristic curve)의 추정은 필수적이다. 따라서, 국내 대표적인 노상토인 다짐된 화강풍화계열 노상토를 대상으로 함수특성을 정량화하기 위하여 pressure plate 장치를 활용하여 건조 및 습윤 이력과정의 실험을 각각 수행한 후 이를 토대로 불포화토 함수특성에 대한 해석을 수행하였다. 실험결과, 화강 풍화 노상토의 함수비를 좌우하는 흡수력이 건조와 습윤 과정에 있어 서로 다른 수치를 나타내었고 흡수력에 따른 불포화 투수계수와 습윤용적 그리고 확산 등의 흐름특성을 통하여 이력(hysteresis)을 확인하였다. 이를 토대로 도로하부의 연중흡수력을 추정하였다.
Low-temperature drying systems have been extensively used for drying cereal grain such as shelled corn and wheat. Since the 1973 energy crisis, many researches have been conducted to apply solar energy as supplemental heat to natural air drying systems. However, little research on rough rice drying has been done in this area, especially very little in Korea. In designing a solar drying system, quality loss, airflow requirements, temperature rise of drying air, fan power and energy requirements should be throughly studied. The factors affecting solar drying systems are airflow rate, initial moisture content, the amount of heat added to drying air, fan operation method and the weather conditions. The major objectives of this study were to analyze the effects of the performance factors and determine design parameters such as airflow requirements, optimum bed depth, optimum temperature rise of drying air, fan operation method and collector size. Three hourly observations based on the 4-year weather data in Chuncheon area were used to simulate rough rice drying. The results can be summarized as follows: 1. The results of the statistical analysis indicated that the experimental and predicted values of the temperature rise of the air passing through the collector agreed well. 2. Equilibrium moisture content was affected a little by airflow rate, but affected mainly by the amount of heat added, to drying air. Equilibrium moisture content ranged from 12.2 to 13.2 percent wet basis for the continuous fan operation, from 10.4 to 11.7 percent wet basis for the intermittent fan operation respectively, in range of 1. 6 to 5. 9 degrees Centigrade average temperature rise of drying air. 3. Average moisture content when top layer was dried to 15 percent wet basis ranged from 13.1 to 13.9 percent wet basis for the continuous fan operation, from 11.9 to 13.4 percent wet basis for the intermittent fan operation respectively, in the range of 1.6 to 5.9 degrees Centigrade average temperature rise of drying air and 18 to 24 percent wet basis initial moisture content. The results indicated that grain was overdried with the intermittent fan operation in any range of temperature rise of drying air. Therefore, the continuous fan operation is usually more effective than the intermittent fan operation considering the overdrying. 4. For the continuous fan operation, the average temperature rise of drying air may be limited to 2.2 to 3. 3 degrees Centigrade considering safe storage moisture level of 13.5 to 14 perceut wet basis. 5. Required drying time decrease ranged from 40 to 50 percent each time the airflow rate was doubled and from 3.9 to 4.3 percent approximately for each one degrees Centigrade in average temperature rise of drying air regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on required drying time. 6. Required drying time increase ranged from 18 to 30 percent approximately for each 2 percent increase in initial moisture content regardless of the fan operation methods, in the range of 18 to 24 percent moisture. 7. The intermittent fan operation showed about 36 to 42 percent decrease in required drying time as compared with the continuous fan operation. 8. Drymatter loss decrease ranged from 34 to 46 percent each time the airflow rate was doubled and from 2 to 3 percent approximately for each one degrees Centigrade in average temperature rise of drying air, regardless of the fan operation methods. Therefore, the average temperature rise of drying air had a little effect on drymatter loss. 9. Drymatter loss increase ranged from 50 to 78 percent approximately for each 2 percent increase in initial moisture content, in the range of 18 to 24 percent moisture. 10. The intermittent fan operation: showed about 40 to 50 percent increase in drymatter loss as compared with the continuous fan operation and the increasing rate was higher at high level of initial moisture and average temperature rise. 11. Year-to-year weather conditions had a little effect on required drying time and drymatter loss. 12. The equations for estimating time required to dry top layer to 16 and 1536 wet basis and drymatter loss were derived as functions of the performance factors. by the least square method. 13. Minimum airflow rates based on 0.5 percent drymatter loss were estimated. Minimum airflow rates for the intermittent fan operation were approximately 1.5 to 1.8 times as much as compared with the continuous fan operation, but a few differences among year-to-year. 14. Required fan horsepower and energy for the intermittent fan operation were 3. 7 and 1. 5 times respectively as much as compared with the continuous fan operation. 15. The continuous fan operation may be more effective than the intermittent fan operation considering overdrying, fan horsepower requirements, and energy use. 16. A method for estimating the required collection area of flat-plate solar collector using average temperature rise and airflow rate was presented.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.