• 펄프종이기술
• /
• 제31권5호
• /
• pp.31-46
• /
• 1999

A drying paper strives to shrink due to the shrinkage of the individual paper fibres. Laboratory results show that a reduction of the shrinkage or an imposed stretch leads to a large increase in tensile stiffness and a large decrease in strain at break. In c cylinder drying section the water in the web is repeatedly heated on the drying cylinder and evaporated in the free draw. To evaluate the drying process regarding influence on paper properties these sub-processes, or drying phases, have to be studied separately. The effect of the conditions on the drying cylinder and on the VacRoll is investigated in pilot trails. Both the fabric tension on the drying cylinder and on the VacRoll reduces the shrinkage of the paper. The laboratory results are used as input to a numerical simulation of the conditions in the free draw. If the web width is increased or the length of the free draw is reduced the mean shrinkage of the paper web is reduced . However, the difference in shrinkage between the middle and the edge of the web is increased.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.17-24
• /
• 2007

본 연구의 목적은 제지공정에서 건조 실린더의 모델을 규명하고 입력변수들에 대한 공정의 응답 특성을 분석하는 것이다. 모델의 규명은 실제 공장의 운전 데이터에 근거하였는데 건조공정에서는 실린더로 공급되는 수증기의 압력이 주요 변수가 된다. 수증기 응축액으로부터 캔버스로의 열전달 계수는 실린더 및 웹과 펄프의 열 전도도와 운전 데이터에 근거하는 실험식으로 나타낼 수 있음이 밝혀졌다. 실린더 모델은 측정되는 수분함량과 웹 온도를 이용하여 검증하였으며 건조 공정의 안정성은 실린더 모델로부터 얻은 전달함수로부터 확인하였다.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.57-67
• /
• 2003

The purpose of the present study is to identify the drying cylinder model in paper plants and to analyze characteristics of process responses for changes in input variables. The model developed in this work is based on actual plant operation data and the steam pressure applied to the cylinder behaves as one the main variables. It is found that heat transfer coefficients from the condensate to the canvas could be represented as empirical relations based on heat conductivities and operation date. The effectiveness of the cylinder model is demonstrated by the measured moisture contents and web temperature. Using transfer functions derived from the cylinder model stability of the drying process is analyzed.

• 펄프종이기술
• /
• 제35권5호
• /
• pp.53-61
• /
• 2003

In this study a model for the drying process in paper production plants was developed based on the mass and heat balances around drying cycles. Relationships for the heat transfer coefficients between the web and the air as well as between the drying cylinder and the web were extracted from the closed-loop plant operation data. It was found that the heat transfer coefficients could be represented effectively in terms of moisture content, basis weight and reel velocity. The effectiveness of the proposed model was illustrated through numerical simulations. From the comparison with the operation data, the proposed model represents the paper plant being considered with sufficient accuracy.

• Advances in concrete construction
• /
• 제3권1호
• /
• pp.39-54
• /
• 2015

Relative humidity and strains within a massive concrete cylinder (${\varphi}450mm{\times}900mm$) in the drying and the re-saturating process were measured for elucidating the process of ASR surface cracking in concrete. The expansion behavior of mortars in dry atmospheres with various R.H. values and the resaturating process was revealed. Non- or less-expansive layers were formed in near-surface regions in the concrete cylinder in the drying process, but ASR expansions actively progressed in inner portions. After resaturating, R.H. values of near-surface regions rapidly increased with time, but expansions in the regions were found to be very small. However, in the middle portions, of which R.H. values were kept 80% ~ 90% R.H. in the drying process, expansion actively progressed, resulting in further development of surface cracks in the re-saturating process.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.249-271
• /
• 2003

본 연구에서는 제지공장의 건조공정에서 실린더 내에 열원으로 공급되는 수증기가 실린더 표면에 이르기까지의 동특성으로부터 건조 실린더에 대한 모델을 구하고 입력변화에 따른 공정 응답의 특성을 분석하였다. 실제 조업조건에 근거한 건조공정 모델에서 수중기 압력이 주요 변수로 작용하며 응축수에서 캔버스에 이르는 계 사이의 열전달 계수는 물질의 열 전도도와 제지공장 운전자료로부터 경험적인 식으로 나타낼 수 있음을 확인하였다. 아울러 실제 공정의 출력변수인 수분함량과 측정된 지필의 온도(open-run, free-run)를 이용하여 모델의 타당성을 검증하였으며 제지공장의 운전 특성을 나타내는 모델에서 유도된 전달함수로 대상 공정의 동특성을 분석하고 안정성 여부를 확인하였다.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2004년도 춘계학술발표논문집
• /
• pp.117-126
• /
• 2004

This paper presents a linear model for heat transfer processes in the drying cylinders and the web in papar mill. The PDE model, functions include steam temperatures, wet temperatures, moisture constents, reel speed and basis weight were derived from operation data. The changes of wet temperatures and moisture contents in the drying cylinders and wets could be described. The Transfer function can be obtained through the state space model derived from the linearized PDE model. Stability of the drying cylinder model for paper plants and analysis of characteristics of process responses for changes in input variables are investigated.

• Journal of the Korean Wood Science and Technology
• /
• 제22권1호
• /
• pp.66-71
• /
• 1994

To increase drying rate and reduce drying degradation, pretreatments such as prefreezing and presteaming have been widely used in wood industries. Presteaming lumbers prior to kiln drying is known positively to improve its permeability, to increase diffusion coefficient and to reduce discoloration, but negatively to increase collapse. Prefreezing lumbers prior to kiln drying is also known to reduce significantly its drying defects and its shrinkages. Thus it is no doubt that the pretreated lumbers shrink diversely from the untreated. In this study the shrinkage behaviors of the pretreated specimens are investigated by drying two tropical hardwoods (Apitong and Taun) in three different dying conditions: high temperature and slow drying rate (drying in a closed cylinder), high temperature and rapid drying rate (drying in an oven) and low temperature and slow drying rate(drying at room temperature). The prefrozen specimens show the least volumetric shrinkages in most drying conditions. The specimens dried in cylinders shrink most among all drying conditions. In general the pretreated specimens reached the 30 % moisture content faster than the untreated by about 30 %.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.981-992
• /
• 2004

Freeze drying under vacuum condition is a complex process that involves simultaneous heat and mass transfer, sublimation of ice, and motion of sublimation front. Proper treatment of the motion of sublimation interface is crucial for an accurate prediction of the freeze drying process. Based on the enthalpy formulation that has been successfully used in liquid/solid phase change problems. a fixed grid method. streamlined for the freeze drying analysis. was developed in this study. The accuracy of the fixed grid method was checked by solving a one-dimensional tray freeze drying and a two-dimensional vial freeze drying problem and then comparing the results with those by the moving grid method. Finally. the freeze drying characteristics of two-dimensional slab and axis-symmetric cylinder was investigated using the fixed grid method.

• 설비공학논문집
• /
• 제16권10호
• /
• pp.923-931
• /
• 2004

A multi-dimensional freeze drying analysis program, which took simultaneous heat and mass transfer, sublimation of ice and motion of sublimation front into full account, was developed using finite volume method with fixed grid. The effect due to the motion of sublimation interface was modeled by an enthalpy formulation streamlined for the freeze drying problems. The efficiency and accuracy of the program was validated by solving one- and two-dimensional freeze drying problems frequently encountered in industrial processes. Finally, the freeze drying processes of cylinder and slab objects with permeable side surfaces were simulated, which demonstrated the capability of the present analysis program in solving multi-dimensional freeze drying problems with complex sublimation interface configurations.