• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.697-702
• /
• 2010

전열교환 엘리먼트는 열회수형 환기유닛의 핵심부품으로, 외기와 실내공기의 열 및 수분교환이 이루어진다. 본 연구에서는 현재 국내에서 사용되고 있는 전열교환 엘리먼트에 대하여 외기의 온 습도 변화가 전열교환 엘리먼트의 성능에 미치는 영향을 실험적으로 연구하였다. 전열교환 엘리먼트를 통과 하는 공기 유량, 입 출구의 건 습구 온도를 정밀하게 측정할 수 있는 실험장치를 특별히 제작하였고, 항온항습실내에서 외기의 상대습도 또는 절대습도를 변화시키며 실험을 수행하였다. 실험결과는 현열전달 유용도과 잠열전달 유용도으로 평가되는데 잠열 전달 유용도는 외기의 상대습도의 증가에 따라 증가하였으나 절대습도의 변화에는 거의 무관하게 냐타났다. 한편 현열 교환 유용도는 외기의 온도 및 습도 변화에 무관하게 일정하였다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.297-300
• /
• 2006

Various buildings constructed by environmentally friendly resources are being built in KOREA. Especially the building made by the wood, which has environmental characteristics that the reinforced concrete and brick doesn't have, are acknowledged with its superiority. Then, studies on indoor thermal control capability of the wooden building and influence of its indoor environment to sensory environment of occupants are not enough proceed. Thus, there were proceeded 24 hours measurements for indoor and outdoor thermal environmental elements of Log Cabins and the hourly subjective tests to evaluate indoor amenity of occupants in this study. The results of the study are following: 1) Upon evaluation on thermal environment elements, indoor and outdoor dry bulb temp were 22.0$^{\circ}C$ and -2.9$^{\circ}C$, and Indoor and outdoor average relative humidity were 25.8%and 52.7%. Differences of indoor and outdoor temperature and humidity were 24.9$^{\circ}C$ and 26.9%. 2) Upon contrastive analysis between the results of subjective tests, warm and cold sensation vote, and PMV (Predicted Mean Vote) and PPD (Predicted Percent Dissatisfaction), values of subjective tests W.9

• 한국초지조사료학회지
• /
• 제10권2호
• /
• pp.115-120
• /
• 1990

A series of experiments were carried out for two successive years to investigate the productivity of forage turnip in mid-northern area of Korea. Fresh matter and dry matter yields of 6 foreign cultivars (Purple Top Strap Leaved, Purple Top White Globed, Seven Top, Shogoin, White Egg and Amber Globe) seeded either in early spring or in autumn after harvesting forage corn were evaluated with different seeding date and harvesting date as well as with different level of fertilization. The results obtained are summarized as follows: 1. The earlier the seeding date in spring (Mar. 29, Apr. 12, Apr. 16) was, the higher was the yield of fresh matter and dry matter as the plant growth ceased after mid June, when the temperature began to rise. 2. In spite of its high DM yield, the Japanese cultivar, Shogoin, showed poor forage quality for summer feeding due to its earlier bolting in harvesting season. 3. Of the 6 cultivars Purple Top White Globed showed highest DM yield (800 kg/ 10a) in mid area including SEOUL irrespective of planting season. 4. Although the turnips showed mostly positive yield responses to fertization, the differences were not great especially above the level of$N-P_2O_5-K_2O$: 5-3-4 kg/lOa. 5. IN TAEGWALLYONG, a northern area of Korea, the average fresh matter yield of the six cultivars tested amounted to 3,500 kg/lOa when drilled on June 30 and harvested on Aug. 30, although bulb formation during the summer was relatively poor. 6. Concluded, forage turnip is regarded to be a suitable catch-crop which has the potential to maintain and increase the total forage production in mid-northern area of Korea. The intercropping is recommendable especially for autumn planting well past the time forage corn has been harvested.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.202-207
• /
• 2008

Measures for coping with energy shortage are being sought all over the world. Following such a phenomenon, effort to use less energy in the design of buildings and equipment are being conducted. In particular, a program to evaluate the performance of a building comes into the spotlight. However. indispensable standard wether data to estimate the exact energy consumption of a building is currently unprepared. Thus, after appling standard weather data for four weather factors which were used in previous researches to Visual DOE 4.0, we compared it with the result of the existing data and evaluated them. For the monthly cooling and heating load of our target building, we used revised data for June, July, August, and September during which cooling load is applied. When not the existing data but the revised data was used, the research shows that an average of 14.9% increased in June, August, and September except for July. Also, in a case of heating load, the result by the revised data shows a reduction of an average of 11.9% from October to April during which heating load is applied. In particular, the heating loads of all months for which the revised data was used were more low than those of the existing data. In the maximum cooling and heating load according to load factors, the loads by residents and illumination for which the revised data was used were the same as those of the existing data, but the maximum cooling loads used by the two data have a difference in structures such as walls and roofs. Through the above results, the research cannot clearly grasp which weather data influences the cooling and heating load of a building. However, in the maximum loads by the change of weather data in four factors (dry-bulb temperature, web-bulb temperature, cloud amount, and wind speed) among 14 weather factors, the research shows that 5.95% in cooling load and 27.56% in heating load increased, and these results cannot be ignored. In order to make weather data for Performing energy performance evaluation for future buildings, the flow of weather data for the Present and past should be obviously grasped.

• 설비공학논문집
• /
• 제16권1호
• /
• pp.42-53
• /
• 2004

An experimental study on the refrigerant-side pressure drop of slit fin-tube heat exchanger has been carried out. A comparison was made between the predictions of previously proposed empirical correlations and experimental data for the pressure drop on design conditions of condenser in micro-fin tube for R22 and its alternatives, R407C (R32/125/134a, 23/25/52 wt.％) and R410A (R32/125, 50/50 wt.％). Experiments were carried out under the conditions of inlet refrigerant temperature of 6$0^{\circ}C$ and mass fluxes varying from 150 to 250 kg/$m^2$s for R22, R407C and R410A. The inlet air conditions are dry bulb temperature of 35$^{\circ}C$, relative humidity of 40% and air velocity varying from 0.68 to 1.43 m/s. Experiments show that pressure drop for R410A and R407C were 17.8∼20.2％ and 5∼6.8％ lower than those of R22 respectively for the degree of subcooling of 5$^{\circ}C$. For the mass fluxes of 200∼250 kg/$m^2$s, the deviation between the experimental and predicted values for the pressure drop was less than $\pm$20％ for R22, R407C and R410A.

• 한국농공학회지
• /
• 제16권2호
• /
• pp.3430-3437
• /
• 1974

.It is very importaut to know the water consumption of crops in planning irrigation works and practicing suitable soil moisture management. For the purpose of making it clear that how much water be consumed to cultivate the Chinese cabbage, Chamber method has been applied. Main equipments in the transpiration chamber are flowers, manometer and electric thermograph. The chamber made of vynyl plate has a small entrance at the base and an exit at the top, and the ventilation in the chamber was carried out by a flower through the entrance and exit. Air-flow adjusted by an orifice manometer enters the chamber from the outside over the crop canopy through the pipe like a chimney and finally goes out to the outside. Two sets which consist of a pair of dry and wet bulb made by thermistor are installed in the entrance and exit tube, and record air temperature automatically. Evapotranspiration amount is computed from the air-flow quantity and difference in absolute humidity between at the entrance and exit of the chamber by the following equation: ET=(X2-X1)${\times}$Q where ET=evapotranspiration amount X1=absolute humidity at the entrance(g/㎥) X2=absolute humidity at the exit(g/㎥) Q=air-flow quantity(㎥) This study was carried out at the upland farm of the Institute of Agriculture Engimeering and Utilization, Suwon, Korea. from 1971 to 1973. The results obtained in this experiment are as follows: 1. The total amount of evapotranspiration of Chinese Cabbage that is cultivated in autumn is 408.1mm during growth period. 2. Chinese cabbage rapidly grows up in the second ten days of September, 40th to 50th days after seeding. At the same time, the maximum amount of evaportranspiration of Chinese cabbage is 61.6mm/10 days 3. The correlation between Pan-evaporation and evapotranspiration is high, coefficient of correlation r=0.88**, and can be shown as The following regression equation: ET=0.913E+20.273 4. Evapotranspiration is closely related with meteorological factors: r=0.85**, for insolation, r=0.76** for air temperature, respectively. 5. The percentage of evapotranspiration amount, at the beginning of growth stage, gradually increases in proportion as the Chinese Cabbage grows but is largely affected by meteorological factors after the green cover formation. 6. By Blaney and Griddle formula, evaportranspiration coefficient "K" are within from 0,85 to 1.27.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.863-872
• /
• 2005

It is important to control indoor environment for influence on health and comfort of occupants in large-sized discount stores. On the other hand large-sized discount stores have a large number of visitors, vestibules, open spaces, high energy consumption and increasing of outside air intake. This study aims to offer the design data of building services system that can save energy and control environment through field measurement selecting two large-sized discount stores. Indoor environment factors such as temperature, relative humidity, air velocity and concentrations of $CO_2$, CO gas and TSP were measured and evaluated. In each case of $CO_2$, and CO gas, its maximum values were 2,800 ppm and 20 ppm. So proper strategy for the indoor air quality is indispensable in this type of building. Dry bulb temperature varies from $18^{\circ}C$ to $28^{\circ}C$ according to a measuring point and time. From this results, it is inferred these buildings had excessive equipment capacity. In terms of economical and environmental points, these data will be utilized to the design of HVAC system of retail facilities.

• 한국태양에너지학회 논문집
• /
• 제39권3호
• /
• pp.67-79
• /
• 2019

The reliable Typical Meteorological Year (TMY) data, sometimes called Test Reference Year (TRY) data, are necessary in the feasibility study of renewable energy installation as well as zero energy building. In Korea, there are available TMY data; TMY from Korea Institute of Energy Research (KIER), TRY from the Korean Solar Energy Society (KSES) and TRY from Passive House Institute Korea (PHIKO). This study aims at examining their characteristics by using Principle Component Analysis (PCA) at six ground observing stations. First step is to investigate the annual averages of meteorological elements from TMY data and their standard deviations. Then, PCA is done to find which principle components are derived from different TMY data. Temperature and solar irradiance are determined as the main principle component of TMY data produced by KIER and KSES at all stations whereas TRY data from PHIKO does not show similar result from those by KIER and KSES.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권8호
• /
• pp.1188-1193
• /
• 2005

An investigation was carried out to study the effect of two housing systems on physiological responses and energy expenditure of sheep in a semi-arid region of India. Two types of housing management were adopted. First was a shed- $6{\times}3\;m^2$ structure with all the four sides of 1.8 m chain link fencing with a central height of 3 m. The roof was covered with asbestos sheets and with mud floorings. Second was an open corral- $6{\times}3\;m^2$ open space with all the four sides covered with 1.8 m chain link fencing. Thirty-four (32 ewes and 2 rams) sheep of native Malpura breed aged about 18 months (body weight 28 kg ewes; 35 kg rams) were grazed together on a 35 ha plot of native range. All the sheep were grazed as a flock from 08.00 to 17.00 h during a yearlong study. The flock was divided into two groups (16 ewes+1 ram) in the evening and housed as per the systems (Shed and Open Corral). Dry and wet temperatures were recorded at 06.00 h and 21.00 h using a wet and dry bulb-thermometer both inside the shed and in the open corral and temperature humidity index (THI) was calculated. There was significant (p<0.05) difference in the THI between shed and open corral in all the seasons, indicating that shed was always warmer compared to open corral. Rectal temperature (RT) of both the groups of sheep was similar during morning as well as evening throughout the seasons. There were significant (p<0.05) differences in the skin temperature (ST) and respiration rate (RR) between the two groups at both the measurements in all the seasons. Highest energy expenditure (EE) was recorded inside the shed at 21.00 h (224 kJ/h) during monsoon and lowest at 6.00 h during winter (119 kJ/h). There was a significant (p<0.05) difference between the EE inside the shed and that in the open corral. It was concluded that housing had significant effects on the physiological responses and EE of sheep. Provision of housing at night was stressful during monsoon (with less rainfall) and summer, whereas it was protecting the sheep from acute cold during winter in a semi-arid region of India.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권10호
• /
• pp.1403-1406
• /
• 2005

The present study was undertaken to study the effect of thermal stress on sexual behaviour of superovulated ewes. Fourteen adult Bharat Merino ewes with an average body weight of 29.4${\pm}$2.34 kg were randomly allocated into two groups of 7 each. All the animals were grazed on natural pasture in the morning and evening hours and housed in shed during night. Animals of Group-1 were housed in shed from 10:00 to 16:00 h while the animals of Group-2 were exposed to thermal stress in a hot chamber ($40^{\circ}C$ /6 h/day). All the animals were offered drinking water once a day at 16:30 h. Meteorological observations i.e. dry bulb, wet bulb, minimum and maximum temperature were recorded daily inside the shed as well as in hot chamber throughout the experimental period. For superovulation of animals, standard protocol developed at the Institute, using FSH (Ovagen 5.4 mg in eight injections) and PMSG (200 IU) was followed. Various sexual behaviour parameters (circling, tail fanning, head turning, standing and approaching to ram) and estrus incidence (onset of estrus and estrus duration) were observed in both the groups. The different estrus symptoms were graded subjectively on arbitrary scale of 0-5 where 0 representing no sexual behaviour (0%) and 5 representing maximum intensity in sexual behaviour (100%). Estrus was detected with the help of a marked aproned ram of proven vigor at six hourly intervals. The average percent values for sexual behaviour parameters recorded in Group-1 and Group-2 animals were 53.7${\pm}$3.76 vs. 41.1${\pm}$2.18 for circling, 71.8${\pm}$5.42 vs. 49.0${\pm}$4.41 for tail fanning, 64.7${\pm}$3.30 vs. 44.5${\pm}$4.34 for head turning, 90.1${\pm}$3.16 vs. 75.8${\pm}$4.02 for standing and 63.8${\pm}$4.8 vs. 41.9${\pm}$4.58 for approaching to ram. Animals exposed to thermal stress had significantly lower values of these sexual behaviour parameters. The animals kept in shed exhibited estrus earlier (25.4${\pm}$1.12 h) and duration was higher (37.7${\pm}$1.59 h) as compared to animals exposed to thermal stress i.e. 30.6${\pm}$1.16 h and 31.7${\pm}$3.57 h, respectively. The findings of the study indicate that thermal stress reduces the intensity of sexual behaviour in ewes and may result in failure of the animal to mate and conceive.