• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.3
• /
• pp.60-74
• /
• 1980

Soil-cement mixtures involve problems in it's durability in grain size distribution and mineral composition of the used soils as well as in cement content, compaction energy, molding water content, and curing. As an attempt to solve the problems associated with durability of weathered granite soil with cement treated was investigated by conducting tests such as unconfined compression test, it's moisture, immers, wet-dry and freeze-thaw curing, mesurement of loss of weight with wet-dry and freeze-thaw by KS F criteria and CBR test with moisture curing on the five soil samples different in weathering and mineral composition. The experimental results are summarized as follows; The unconfined compressive strength was higher in moisture curing rather than in the immers and wet-dry, while it was lowest in freeze-thaw. Decreasing ratio of unconfined compressive strength in soil-cement mixtures were lowest in optimum moisture content or in the dry side rather than optimum moisture content with freeze-thaw. The highly significant ceofficient was obtained between the cement content and loss of weight with freeze-thaw and wet-dry. It was possible to obtain the durability of soil-cement mixtures, as the materials of base for roads, containing above 4 % of cement content, above 3Okg/cm$_2$ of unconfined compressive trength with seven days moisture curing or 12 cycle of freeze-thaw after it, above 100% of relative unconfined compressive strength, 80% of index of resistance, below 14% of loss of weight with 12 cycle of wet-dry and above 1. 80g/cm$_2$ of dry density.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.33-45
• /
• 2024

Three spring potato varieties (Atlantic, Chubaek, and Superior) were cultivated for 80, 90, and 100 days and compared in terms of their total and marketable yields and specific gravities. Subsequently, changes in the quality parameters (weight loss, sprouting rate, disease incidence, dry weight, and specific gravity) of potatoes cultivated for 100 days were monitored during two-month storage in improved and semi-underground warehouses at 4℃ and room temterature. The productivities of Atlantic, Superior, and Chubaek were maximized at cultivation periods of 100, 100, and >90 days, respectively. In all cases, cold storage resulted in <5.3% weight loss and no marketability loss. However, two-month room temperature storage resulted in pronounced marketability loss due to weight loss (6.2, 7.3% and 10.9% for Atlantic, Superior, and Chubaek, respectively) and sprouting (in ~13%, >75%, and 99% of Atlantic, Superior, and Chubaek tubers, respectively). The marketability of Atlantic, Superior, and Chubaek during cold storage was maintained for >2, ~2, and <2 months, respectively. All varieties were characterized by rapid sprouting, low dry weight and specific gravity, and rapid marketability loss during storage.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.807-817
• /
• 2016

Many onion growers and researchers assert that differences in soil type, agricultural practices, weather, and duration of prolonged onion cultivation in a particular field could affect onion bulb quality. This study evaluates the bulb quality of onions grown in different regions and determines the correlations between bulb characteristics and postharvest loss during cold and ambient storage. Soil and onion bulbs were collected from fields in six onion growing regions in Korea, during the growing season of 2011-2012. The fresh weight, dry matter content, and carbon (C), sulfur and magnesium contents of the onion bulbs were significantly affected by the location in which they were grown. Bulbs grown in Muan had the greatest number of scales, thinnest scale thickness, and the highest total soluble solids (TSS) and total flavonoids (TF). Bulbs originating from Jecheon had the lowest pyruvic acid (PA), total phenolics and TF. Storage loss of bulbs from the different regions was similar in refrigerated storage, but differed in ambient temperature storage. Bulb fresh weight was positively correlated with scale thickness (r = 0.617) and cold storage loss (CSL; r = 0.398). Dry matter content was positively correlated with C (r = 0.958) and TF (r = 0.256) contents, while it was negatively correlated with CSL (r = -0.424). CSL was primarily affected by the fresh weight, as well as the dry matter, C, and PA contents of the bulbs, while ambient storage loss was primarily influenced by the amount of TSS.

• The Journal of the Korean dental association
• /
• v.12 no.7
• /
• pp.521-526
• /
• 1974

This observation was carried out to investigate the inorganic constituents of dental calculus of varying locations and different ages. Supragingival calculus was obtained from 540 patients with the periodontal disease. The results were as follows : 1. The weight loss rate in ashing by aging was the highest in the 2nd decade (63.7%) and followed in order by 3rd decade (60.8%), seventh decade 959.8%), fourth decade (55.9%), sixth decade (52.6%) and fifth decade (43.2%). 2. The weight loss rate by ashing was more prominent in the buccal surfaces of the upper posterior teeth (62.0%) than in the lingual surface of the lower anterior teeth (59.7%). 3. The difference in contents of the inorganic constituents by sex was not remarkable. (male, Ca:373.0 P:333.9, female, Ca: 380.2, P: 339.6 ㎍/mg dry weight) 4. In the dry calulus, contents of the inorganic constituents were as follows: Ca:325.8 P:269.10 Mg:1.21 Na:8.44 K:1.32, Zn:0.67 ㎍/mg. 5. The Ca/P ratio was the lowest in the upper anterior region (1.11) and the highest in the lower posterior region (1.29) and the average was 1.20.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.300-303
• /
• 1999

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. So-called, it was the solvent washing dry, Three organic solvents (methanol, ethanol, and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol, and acetone were all available organic solvents for this method. The tapes washed in methanol, ethanol, and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated. The tape casting system was designed for the solvent washing dry and prepared. An homogeneous tape was established by continuous tape casting process.

• Journal of Animal Science and Technology
• /
• v.58 no.10
• /
• pp.36.1-36.5
• /
• 2016

Background: Liquid feeding system has been introduced to domestic swine farms, but negative cognition about liquid feeding system has been remained for feed waste decay related with poor management and microbial contamination. For these reasons, this study was conducted to evaluate the effects of feeding method in lactating sows. Methods: A total of 30 mixed-parity (average 4.13) lactating sows (Yorkshire ${\times}$ Landrace) with an initial BW of $218.8{\pm}19.5kg$ was used in a 3 week trial. Sows were allotted to 1 of 2 treatments in a completely randomized design by their body weight, backfat thickness, parity and alive litter weight. One of treatments was dry feeding and the other was liquid feeding (water to feed ratio, 1:1). Experimental diets contained 3265 kcal ME/kg, 12.6 % CP, 5.76 % EE, 1.09 % total lysine, 0.25 % total methionine, as fed basis. Results: Dry feeding treatment had high body weight loss rather than liquid feeding treatment (P = 0.04). Dry feeding treatment had tendency to increase litter weight at 21d of lactation (P = 0.06) and litter weight gain (P = 0.04) during lactation period (0-3 week). Sows fed dry feeding method made milk containing high content of casein and total solid rather than sows fed liquid feeding method (P = 0.04). In addition, dry feeding treatment had tendency to higher content of milk fat, protein and solid not fat on 21d of lactation (P = 0.07). Sows fed dry feeding type also showed higher milk energy content in milk of 21d lactation (P = 0.05). Furthermore, liquid feeding treatment showed high occurrence in feed waste during lactation period (P <0.01). Conclusion: Dry feeding method was more suitable feeding method to lactating sows under high temperature environment like lactating barn.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.26-32
• /
• 1998

This study was conducted to obtain the basic information on the burley tobacco (Nicotiana tabacum L.) curing methods. The effects of the three kinds of curing methods on the dry weight losses during curing, chemical contents and physical properties of cured leaves, and organoleptic and smoking qualities were observed. The dry weight losses during curing was the highest in the stalk curing, and the lowest in the conventional priming. The longer the curing periods was, the more the loss of dry weight. The percent of the excessive dried leaves was high and the price per kilogram was low in the conventional priming. The chemical contents and the physical properties of the cured leaves in the conventional priming were similar to those of yellowing or browning stage of curing. But, the chemical contents and the physical properties of the cured leaves in the stalk curing were comparable to those of the air curing. The smoking quality was the best in the stalk curing.

• The Korean Journal of Ecology
• /
• v.26 no.6
• /
• pp.313-319
• /
• 2003

Dry weight loss and nutrient release from leaf litter for six tree species were studied using litter bag methods. The litter bags were incubated for f6 months on the forest floor in temperate deciduous forest in Mt. Cheonma, located at the middle part of Korean Peninsula. The changes in nutrient content and the rate of dry weight loss in leaf litter varied with litter types. The litter of Pinus densiflora showed the lowest rate of mass loss (k=0.33), nitrogen concentration (0.89%) and ash concentration (2.50%), while showed the highest C/N ratio (63.40). On the other hand, the litter of Acer pseudo-sieboldianum showed the fastest rate of mass loss (k=0.82), the highest nitrogen concentration (1.11%), and the lowest C/N ratio (49.40). During the decomposition, nitrogen, phosphorus and calcium in the leaf litters showed relatively slow decreasing pattern compared to other elements (carbon, potassium, magnesium, manganese and sodium), but potassium and sodium decreased at early stage of the decomposition for all leaf litters. Differences in annual decomposition rates of litter among species were consistent with the particular chemical characteristics of their leaf litters. The initial concentration of nitrogen was positively correlated with litter decomposition rate for six species, while litter decomposition rate of six species was negatively correlated with C:N ratio of initial leaf litters.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.699-704
• /
• 2004

As being inconvenient to apply reinforced concrete structure to high-rise buildings, it is applied steel structured system. Therefore light-weight wall systems are applied as partition wall to reduce the self-load of the building. But, the required performances of a light-weight wall are not evaluated systematically. As a field survey result, partition walls of house-to-house were not showed their respected performances, so the dwellers are feel so worse the quality of the whole building. In steel-structured high-rise buildings especially, occupant's dissatisfaction concerned indoor noise was high because curtain wall systems having a high air-tight performance isolate the outdoor noise making masking effect. Therefore wall systems which have high performances of sound insulation and air-tightness are required in high-rise buildings. As a result, a new drywall system was presented and the performance was verified with field test.

• Electrical & Electronic Materials
• /
• v.9 no.4
• /
• pp.344-350
• /
• 1996

Tracking is one of the biggist problems to be overcome in polymeric materials for outdoor insulators. But It can be decreased with the addition of filler such as alumina trihydrate (ATH). In this paper, the tracking of surface and evaluation of insulating ability at silicone rubber is investigated, using the salt fog test. At initial state, the peak leakage current and numbers by dry band arcing is increasing with increasing the filler level, but at aged state decreasing at high concentration filler samples. This is because the roughness of the surface may contribute to the increase in peak leakage cur-rent and numbers. As increasing the filler level, the insulating ability of materials is higher and weight loss is decreased. The mechanism of insulating failure is occurred by the erosion than the tracking and the erosion caused weight loss of 2 g.