• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.391-396
• /
• 2007

Dry washing by air and sand to clean dishes was investigated for establishing a dry washing process in a kitchen. Thirty seasonings and foods as dirt markers and fourteen kinds of dishes were used for the experiment, and washing efficiency was evaluated by COD-MN (mg/L). It was found that air dry washing effectively reduced COD-MN of some dirt markers but not effective at all to some dirt markers. It could be also said that dirt markers would not be completely removed by air dry washing. The shape of dishes also affected COD-MN reduction by air dry washing. Sand dry washing showed excellent efficiency on COD-MN reduction. Combination of air and sand dry washing may be necessary to make a dish dry washing system which is completely independent from water.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.300-303
• /
• 1999

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. So-called, it was the solvent washing dry, Three organic solvents (methanol, ethanol, and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol, and acetone were all available organic solvents for this method. The tapes washed in methanol, ethanol, and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated. The tape casting system was designed for the solvent washing dry and prepared. An homogeneous tape was established by continuous tape casting process.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.1
• /
• pp.181-189
• /
• 2019

The washability, redeposition, fill power, and fabric damage of wet cleaning and dry cleaning solvents were measured to identify the optimal type of washing that would increase washability while maintaining dimensional stability. The soiled fabric is a polyester cotton blend and the types of soil were wine, blood, make-up and sebum with carbon black. Petroleum and silicone solvents were used in dry cleaning. Results from this study are as follows. First, detergency is significantly influenced by the type of washing and type of soil. Wet cleaning is superior to dry cleaning. Wet cleaning shows a strong washing performance against hydrophilic soils, whereas, dry cleaning is stronger against hydrophobic soils. Second, redeposition is significantly affected by the type of washing, fabrics, and soils. Redeposition occurred little on cotton during wet cleaning, but showed a high rate for nylon. However, when the two types of fabric were dry cleaned, redeposition occurred on both types. Third, the fill power of duck-down is very affected by the type of washing. Resilience is the best in wet cleaning; and in dry cleaning, petroleum solvents showed a higher resilience when as compared to silicone solvents. Last, the level of fabric damage to cotton fabrics is highly influenced by the type of washing. Wet cleaning damages cotton fabrics significantly more than dry cleaning. For dry cleaning, petroleum solvents damage these fabrics slightly more than silicone solvents. In conclusion, the type of soil must initially be identified to determine the optimal type of washing. Special caution is required when textiles with particulate soil and nylon are washed. When considering the resilience of duck-down clothing, wet cleaning is more appropriate than dry cleaning. Dry cleaning, especially when using silicone-based solvents, is more suitable than wet cleaning for maintaining the shape of clothing.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.114-121
• /
• 2010

Denim is one of the most frequently used fabrics for blue jeans. After washing denim fabric frequently changes its size and color. Salespersons recommended that after purchasing blue jeans customers should dry clean them once before washing. The aim of this study was to investigate to what degree washing with a household washing machine and dry cleaning affected the dimensions and the color of denim fabric. The denim fabric shrank greatly after the first laundering in warp direction regardless of whether it had been dry-cleaned or not. However, it shrank little from the second to the tenth laundering and after each number of dry cleanings. The thickness of the denim changed in the same way as the shrinkage occurred when the number of launderings or dry-cleanings increased. Although the indigo came out of the denim into washing liquor, both of the $L^*$ values and the $b^*$ values of the laundered and the dry-cleaned denim fabrics were lower than those of the control fabric. Darkening of the fabric after washing attributed to the shrinkage in warp; specifically the deep-blue warp yarns more spaced on the fabric face and the back. The $L^*$ and $b^*$ values of the dry-cleaned fabric decreased less than those of the laundered. The value of $a^*$ increased much less than the other values. Staining of the white cotton fabric laundered with the denim fabrics became less as the number of launderings increased. The degree of staining from the dry-cleaned denim was much lower than that of the laundered fabric.

• Journal of the Korean Home Economics Association
• /
• v.17 no.4
• /
• pp.15-22
• /
• 1979

This paper was studied changes of physical properties of Lining fabrics by washing and difference between dry method. I experimented four kinds of Lining fabrics for the sample . The analysis was performed by correlation coefficient analysis and significance tested between correlation coefficients. The results are summarized as follows : 1) Increasing rate of shrinkage tends to call high density and weight. 2) Rayon fabrics is shown the most high rate of shrinkage and decreasing strength by increasing washing times. 3) Drip dry makes little change of physical properties. 4) Polyester fabrics is little by washing times and dry method.

• The Korean Journal of Ceramics
• /
• v.7 no.2
• /
• pp.55-57
• /
• 2001

For the fast dry of the aqueous tape, the process which water was replaced by organic solvent was proposed. Socalled, it was the solvent washing dry. Three organic solvents (methanol, ethanol and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol and acetone were available organic solvents for this method. The tapes washed in methanol, ethanol and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not found any more. The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.78-83
• /
• 2010

On the paved track, the ballast is used as aggregate for the filling layer using the pre-packed concrete technique. The most important condition of aggregate is adhesive strength with mortar. To satisfy this condition, surface of aggregate should be cleaned by water or others. In a paved-track method to be introduced domestically, an environment-friendly dry-washing technology which will replace the water-washing method has been developed. A dry-washing method was designed to blast the crushed weight material with a diameter of 0.3~0.5mm at high pressure to peel the surface of the aggregate. The study was intended to enhance the washing efficiency of dry-blasting technology and to that end, the tests including blasting material, content of fine aggregate depending on time elapsed, content of chloride, LA abrasion rate and compressive strength were conducted to recommend the efficient washing material and the process.

• The Korea Journal of Herbology
• /
• v.33 no.1
• /
• pp.85-91
• /
• 2018

Objectives : This study was carried out to evaluate the quality of different drying methods and different roots(primary root and lateral root) of Angelica gigas Nakai. Methods : The experimental method was performed according to the Korea Pharmacopoea Eleventh edition (KP11). Loss on drying, ash, acid insoluble ash, ethanol extract, nodakenin and total decursin contents were tested to evaluate the quality of root tissue of Angelica gigas Nakai. In addition, the treatment of different root parts were prepared in two groups of washing dry process and natural dry process. Results : In comparison of dry processing methods, total contents of nodakenin and total decursin in the primary root and lateral root through washing dry process were ranged from 3.55 to 4.09% and from 5.18 to 6.13%, respectively. And also, those of roots from the natural dry process were from 4.36 to 6.22% and from 6.28 to 8.34%, respectively. In the washing dry process and natural dry process methods, 47.9% and 22.3% higher amount of nodakenin and total decursin were measured in lateral root compared to primary root. In common, lateral roots accumulated higher contents of nodakenin and total decursin compared to primary roots, and samples drying processed with natural dry process compared to washing dry process method contained higher amount of compounds. Conclusions : We sincerely hope that this study will be contributed to the standardization and quality control of Angelica Gigas Root.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.6
• /
• pp.942-952
• /
• 2014

Winter outerwear includes various clothes such as classical jackets/coats, padded jackets/coats, wind breakers, leather and fur jackets/coats. This research surveyed care-label instructions attached to 100 jackets/coats dropped off at five drycleaners in the Gyungin area. University students' perception and attitudes towards care labels and management of winter outerwear were examined using a questionnaire. Data collected from 230 respondents were analyzed by frequency analyses, t-tests, ANOVAs and Duncan tests with PASW 20.0. Half of the padding jackets/coats were labelled to be dry cleaned and dry cleaning was more excessively labelled than necessary. University students confirmed more care symbols than fiber compositions such as more at time of cleaning than at purchasing. Clothing-related major students understood care label symbols better than non-clothing major students. Consumers laundered some winter outerwear at home, even though they thought dry cleaning was a proper cleaning method. The appropriate cleaning method for padded jackets/coats is laundering; however, consumers who answered dry cleaning as an appropriate method were three times as those who answered washing, and those performed dry cleaning were two times as those who performed washing. Winter outerwear manufacturers should provide adequate and more specified care-information to consumers in order to maintain initial appearance and performance over longer periods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.69-70
• /
• 2006

Waste vinyl tretreatment system has been developed by the joint project between KIMM and Woosung Co. General process for removal of impurities from waste vinyl is consisted of feeding, separating, cutting, washing, drying and recovering impurities. However, there are problems such as wastewater when washing of waste vinyl. In order to solve these problems we have developed new dry type cleaning system.