• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.130-131
• /
• 2005

A study developing the dry powder fire extinguishing system inside the simulated machinery spaces of small ship was performed. Fire tests were conducted inside the compartments having volums 8$m^3$, 2.9$m^3$ and 4.5$m^3$ respectively. The openings and fans were established on the walls of the compartments. Diesel oil was used for the test fuel. In addition fire extinguishing nozzles using dry powder were installed downward at ceiling and horizontally at the wall or conner. All fires in the test were extinguished under system activation and there was no reignition.

• 박물관보존과학
• /
• 제14권
• /
• pp.37-60
• /
• 2013

국립중앙박물관 소장 고구려 벽화는 국립중앙박물관 도록에 소개된 벽화 모사도와 일제 강점기에 촬영한 유리건판 사진으로만 제공되어 왔다. 그러나 이번에 수행한 국립중앙박물관 소장 고구려 벽화 편의 보존과학적 처리와 분석을 통해 전모를 파악할 수 있게 되었다. 보존과학적 처리는 벽화 편의 바탕층의 구조와 성분, 균열 등의 손상 파악과 퇴색된 채색 부분에 광학현미경과 적외선 조사를 했으며, 취약한 벽체와 박락된 채색층 강화에 중점을 두고 수행하였다. 더불어 적외선 조사한 결과를 국립중앙박물관 소장 벽화 모사도와 유리건판사진과 비교하여 고분의 위치를 조사했으며, 일부 벽화 편에서 감신총, 개마총, 고산리1호분, 운봉리고분으로 확인되었다. 고구려 벽화 편에 채색된 안료의 성분 원소와 벽체층의 광물구조를 분석하였다. 분석결과, 모든 측정 위치에서 방해석[calcite, CaCO₃]이 확인되었다. 이는 벽화의 바탕재료로 보이며, 석회층 위에 안료를 채색한 것으로 판단된다. 안료 색상 중 갈색을 포함한 황색은 산화철[hematite, Fe₂O₃]로 검출되었고 일부 편에서는 백연석[cerussite, PbCO₃]과 산화납[lead oxide, PbO]이 확인되었다. 이는 연백[lead white, 2PbCO₃·Pb(OH)₂]의 산화물로 추정된다. 또한 적색에서는 주사[cinnabar, HgS], 흰색에서는 방해석[calcite, CaCO₃]과 백연석[cerussite, PbCO₃]이 확인되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.65-69
• /
• 2007

Recently, the method of the apartment building design is changing from wall type to moment structure. Because of this reason, dry wall systems are used plentifully. This study examines the sound insulation performance of the light weight concrete panel using bottom ash. There is the difference of airborne sound isolation between laboratory and field test. For the purpose of searching deviation, we use the prediction tool(Insul 6.0). First, we calculated the prediction data and measured the sound isolation in the wall at the lab. Then, we measured it in the field and compared them. At the base of these datum, we measured the difference.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.675-688
• /
• 2017

The anchor block is a specially designed concrete member intended to withstand pullout or thrust forces from backfill material of an internally stabilized anchored earth retaining wall by passive resistance of soil in front of the block. This study presents small-scale laboratory experimental works to investigate the pullout capacity of a concrete anchor block embedded in air dry sand and located at different distances from yielding boundary wall. The experimental setup consists of a large tank made of fiberglass sheets and steel framing system. A series of tests was carried out in the tank to investigate the load-displacement behavior of anchor block. Experimental results are then compared with the theoretical approaches suggested by different researchers and codes. The appropriate placement of an anchor block and the passive resistance coefficient, which is multiplied by the passive resistance in front of the anchor block to obtain the pullout capacity of the anchor, were also studied.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.169-174
• /
• 1996

The applications of the high density plasma sources to the etching in semiconductor fabrication process are actively studied because of the more strict requirement from the dry etching process due to shrinking down of the critical dimension. But in the oxide etching with the high density plasma sources, abundant fluorine atoms released from the flurocarbon feed gas make it difficult to get the highly selective $SiO_2/Si$ etching. In this study, to improve the $SiO_2/Si$ etch selectivity through the control of the radical loss channels, we propose the wall heating , one of methods of controlling loss mechanisms. With appearance mass spectroscopy(AMS) and actinometric optical emission spectroscopy(OES), the increase of both radicals impinging on the substrate and existing in bulk plasma, and the decrease of the fluorine atom with wall temperature are observed. As a result, a 40% improvement of the selectivity was achieved for the carbon rich feed gas.

• Journal of Plant Biology
• /
• 제30권3호
• /
• pp.189-199
• /
• 1987

Morpho-histogenesis of fruit sculpture and dehiscence in Thespesia populnea is described. The fruit wall is differentiated into epicarp, mesocarp and endocarp. The epicarp is stony, rind-like, 30 to 35 layers thick and derived from outer epidermis, sub-epidermis and ground parenchyma of the ovary wall. The spherical and/of tangentially elongated, thick walled cells of epicarp are interspersed with radial bands of sclereids. The mesocarp is a product of the inner zone of ground parenchyma. At maturity 20 to 25 layers of thin walled parenchyma of mesocarp appear sinuous of disorgnized. The innermost 1 to 3 layers of ground parenchyma and sub-epidermis and inner epidermis form 35 to 40 layers thick endocarp. Due to the differentiation of fibrous tissue in the projection of median plane of carpel wall and a complete ring of fibrous zone in the endocarp, the dry capsule of Thespesia populnea dehises partially in loculicidal fashion.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.16.1-16.1
• /
• 2011

Gas sensor properties of $WO_3$ nanowire structures have been studied. The sensing layer was prepared by deposition of tungsten metal on porous single wall carbon nanotubes followed by thermal oxidation. The morphology and crystalline quality of $WO_3$ material was investigated by SEM, TEM, XRD and Raman analysis. A highly porous $WO_3$ nanowire structure with a mean diameter of 82 nm was obtained. Response to CO, $NH_3$ and $H_2$ gases diluted in air were investigated in the temperature range of $100{\sim}340^{\circ}C$ The sensor exhibited low response to CO gas and quite high response to $NH_3$ and $H_2$ gases. The highest sensitivity was observed at $250^{\circ}C$ for $NH_3$ and $300^{\circ}C$ for $H_2$. The effect of the diameters of $WO_3$ nanowires on the sensor performance was also studied. The $WO_3$ nanowires sensor with diameter of 40 nm showed quite high sensitivity, fast response and recovery times to $H_2$ diluted in dry air. The sensitivity as a function of detecting gas concentrations and gas sensing mechanism was discussed. The effect of dilution carrier gases, dry air and nitrogen, was examined.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.588-599
• /
• 2019

This research presents a structural design of high-level waste (HLW) container using ultra-high performance fiber reinforced concrete (UHP-FRC) material. The proposed design aims to overcome the drawbacks of the existing concrete containers which are heavy, difficult to fabricate, and expensive. In this study, the dry storage container (DSC) that commonly used at Canadian Nuclear facilities is selected to present the proposed design. The design has been performed such that the new UHP-FRC alternative has a structural stiffness equivalent to the existing steel-concrete-steel container under various loading scenarios. Size optimization technique is used with the aim of maximizing stiffness, and minimizing the cost while satisfying both the design stresses and construction requirements. Then, the integrity of the new design has been evaluated against accidental drop-impact events based on realistic drop scenarios. The optimization results showed: the stiffness of the UHP-FRC container (300 mm wall thick) is being in the range of 1.35-1.75 times the stiffness of existing DSC (550 mm wall thick). The use of UHP-FRC leads to decrease the container weight by more than 60%. The UHP-FRC container showed a significant enhancement in performance in comparison to the existing DSC design under considered accidental drop impact scenarios.

• 보존과학회지
• /
• 제2권2호
• /
• pp.15-24
• /
• 1993

To understand the morphological change of ancient woods, samples classified by cell type, burial environment and species were collected and observed using microscopy. Decay of wood by cell type could classified into two types. First, degraded secondary wall was formed granular residues in $S_2$ layer and was remained $S_3$ layer and compound middle lamella. Second, the cell wall was slightly degraded and cracked in secondary wall. A gradual thinning of cell wall was occured. The compound middle lamella was separated from secondary wall. The resistance of degradation is increased at vessels, parenchyma, and tracheid and wood fiber in the order named. The type of degradation by species could be classified into four types. Overall degradation type; the degradation of cell wall is usually heavy and the extent of degradation Varies by part of the same sample. Partial degradation type ; this type shows severely different decay type by part of the sample. Nondegraded cells were mixed with degraded cells on the same sample. Erose degradation type ; thinning of the cell wall was occoured and the degradation type was different by part. Slight degradation types ; secondary wall was slightly degraded, cracked and separated from compound middle lamella. Considering different type of burial environment, dry wood was similiar to sound wood and slightly decayed. Waterlogged and peat burial wood was heavilydecayed. Between species of under the same environment, decay type and extent were diferentiated from each other.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.1-7
• /
• 2011

최근 초고층 건축물의 방재분야에 대한 관심이 증가하고 있으며, 특히 화재발생 시 고층으로 인한 피난시간의 증가에 대비하여 건축물내의 화재전파를 최소로 억제하고자 노력하고 있다. 방화구획은 건축물에서 화재전파를 억제하는 대표적인 방법으로 내화성능이 있는 벽체와 방화문을 이용하여 화재발생 시 해당구획내에서 연소가 종료되거나 타 구획으로의 화재전파시간을 증가시킴으로써 피난시간을 확보하게 된다. 그러나 현행 건축법에는 초고층건축물을 고려치 않은 최대 2시간 내화성능만은 요구하고 있어 초고층 건축물용 방화벽의 개발에 걸림돌이 되고 있다. 따라서 본 연구에서는 내화벽체의 성능등급에 대하여 검토하였으며, 향후 초고층 건축물용 내화벽체 개발을 위하여 내화성능, 시공성, 사용성 등을 고려한 제품개발 방향을 제시하였다.