• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.1
• /
• pp.34-45
• /
• 2007

In order to reduce the compression power and to use the overall energy contained in LNG effectively, a combined cycle is devised and simulated. The combined cycle is composed of two cycles; one is an open cycle of liquid/solid carbon dioxide production cycle utilizing LNG cold energy in $CO_2$ condenser and the other is a closed cycle gas turbine which supplies power to the $CO_2$ cycle, utilizes LNG cold energy for lowering the compressor inlet temperature, and uses the heating value of LNG at the burner. The power consumed for the $CO_2$ cycle is investigated in terms of a solid $CO_2$ production ratio. The present study shows that much reduction in both $CO_2$ compression power (only 35% of the power used in conventional dry ice production cycle) and $CO_2$ condenser pressure could be achieved by utilizing LNG cold energy and that high cycle efficiency (55.3% at maximum power condition) in the gas turbine could be accomplished with the adoption of compressor inlet cooling and regenerator. Exergy analysis shows that irreversibility in the combined cycle increases linearly as a solid $CO_2$ production ratio increases and most of the irreversibility occurs in the condenser and the heat exchanger for compressor inlet cooling. Hence, incoming LNG cold energy to the above components should be used more effectively.

• KSBB Journal
• /
• v.19 no.4
• /
• pp.245-249
• /
• 2004

A combined method of autolysis and enzymatic hydrolysis of baker's yeast was developed for the production of yeast extract, which is widely used as a natural food ingredient. From statistical analysis, NaCl and ethanol addition were found to be significantly effective factors in autolysis of yeast. The optimum dosages of salt and ethanol were 3% and 1%, respectively. Heat treatment and the use of cell lytic enzyme were not significantly effecting on the autolysis. Yeast hydrolysate was prepared by autolysis, followed by enzymatic hydrolysis using proteases, nuclease and deaminase. Additionally, the hydrolysate was processed by downstream process including Maillard reaction and debittering. The total dry matter yield and total nitrogen yield for the process were 76% and 59%, respectively. Compared to a process using brewer's yeast, when baker's yeast was used as a raw material, a higher recovery yield was obtained.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1323-1328
• /
• 2004

This paper shows the study on the design of the spray-freeze dryer for the production of the pulmonary inhalation powders. Powder production and handling has been an integral part of pharmaceutical processing because of the wide use of oral dosage forms. There are a few commonly used powder preparation methods including mechanical milling, precipitaion, spray drying, freeze drying, and so on. In general, methods available for preparing inhalation powders are limited due to certain inhalation powder's sensitive nature to the processing environments. This is particularly true for preparing dry powder aerosols where the aerodynamic particle size$(<5{\mu}m)$ and the size distribution are pivotal. Supercritical fluid antisolvent and spray freeze drying have recently emerged as promising techniques for producing powders for use in microcapsulation. However, the aerosol applications of these powders are yet to be explored. The purpose of this study is to test the feasibility of using spray freeze-dried pulmonary inhalation powders for aerosolization.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.337-342
• /
• 2001

The Rondonia Boundary Layer Experiment (RBLE-II) was conceived to collect data the atmospheric boundary layer over two representative surface in the Amazon region of Brazil; tropical forest and a deforested, pasture area. The present study deals with the observations of atmospheric boundary layer growth and decay. Although the atmospheric boundary layer measurements made in RBLE-II were not made simultaneously over the two different surface types, some insights can be gained from analysing and comparing with their structure. The greater depth of the nocturnal boundary layer at the forest site may be due to influence of mechanical turbulence. The pasture site is aerodynamically smoother and so the downward turbulent diffusion will be much pasture than over the forest. The development of the convective boundary layer is stronger over the pasture than over the forest. The influence of the sensible heat flux is important but may be not enough to explain the difference completely. It seems that energy advection may occur from the wet and colder(forest) to the dry and warmer area(pasture), rapidly breaking up the nocturnal inversion. Such advection can explain the abrupt growth of the convective boundary layer at the pasture site during the early morning.

• Journal of Korean Medical classics
• /
• v.30 no.2
• /
• pp.31-43
• /
• 2017

Objectives : Written by Yoongdongri in the 18th century Chosun, Chochangkyeul is a book that specially deals in Ungi. Yoon understood a person's body constitution by taking into factor the person's birth year, and used this information to determine his Ungi type, and understood his disease mechanism. Methods : Following the study on the first part of Chochangkyeul, named Ungiyeonron, the paper tries to study the book's second part, called Yongyakgwon. The book's core messages are summarized upon a thorough inspection. Results & Conclusions : Yoondongri was a highly-acclaimed doctor in the 18th century Chosun, and also an Ungi practitioner who utilized the theory of Ungi in his clinical practices. His practices were mainly based on the prescription of Ungi found in Chenwuze's Sanyinfang, coupled with almost all parts of Donguibogam's Husebang. He had an extensive clinical experience which helped him describe his methods of quickly responding to the side effects that sometimes occur due to misuse of medicine. Such detailed descriptions are never found in past medical books, which gives Yoon's book a great level of historical importance. Yongyakgwon divides the scripts between Gabsin, Muui, Byungye, Gyungjeong, and Yimgi in accordance with the theory of Ounhabgi, and also introduces treatments based on Yukisachun. Jangbupasuyak also introduces about six external organs and six internal organs with relation to treating wind medicine, treating heat medicine, treating cold medicine, treating dry dampness medicine, dryness-moistening medicine, pulling meridian medicine. All of these can be applied to patients easily.

• The Journal of Korean Medicine
• /
• v.28 no.3 s.71
• /
• pp.232-243
• /
• 2007

Objective : This study researched the application of Sa-am acupuncture for the treatment of hiccup. Methods : We investigated the literature for Sa-am acupuncture treatment and traditional acupuncture treatment for hiccup. Result & Conclusion : In traditional oriental medicine, hiccup is considered to be caused by uprising stomach gi, whereas, in Sa-am acupuncture, it is considered to be caused by weakness and impurity of lung gi. In Sa-am acupuncture, hiccup is divided into five classes; reverse hiccup (treated with large intestine tonification), wind hiccup (treated with liver tonification), fire hiccup (treated with heart tonification), damp hiccup (treated with spleen tonification) and cold hiccup (treated with kidney tonification). In traditional oriental medicine, hiccup is treated by way of lowering the uprising stomach gi, while, in Sa-am acupuncture, hiccup is treated by way of removing whichever of the original cause of hiccups (impurity of large intestine, damage to liver, dry heat of heart, impairment of spleen, exhaustion of kidney) caused the weakness and the impurity of lung gi. In Sa-am acupuncture, the therapeutic mode for all the five causes of hiccups is tonification mode.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.58-66
• /
• 2010

The Annals of beeswax applied-Joseon Dynasty have some serious damages such as cracks, brown, red or black spots, and discolorations by chemical and biological degradation, but others without any beeswax application have still been keeping good quality during over several hundred years. It would be convinced that the beeswax applied in the Annals resulted in these deteriorations. Therefore, in order to focus on the aging mechanism and conservation techniques for the beeswax-applied Annals of Joseon Dynasty, the beeswax applying and dewaxing techniques of Hanji were tried by auto bar coater with a hot plate, and by heat-pressure sensitive extracting treatments. The ageing behaviors of beeswaxed Hanji and dewaxed Hanji were investigated by measuring the changes of physical, optical, morphological, and chemical properties, through accelerated ageing treatment in dry oven at $150^{\circ}C$ during 48 hours. Consequently, the ageing actions of beeswaxed Hanji were even faster than that of Hanji. The optimum dewaxed amounts from beeswaxed Hanji was also obtained in pressure of $40\;kg_f$ under heating conditions.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.1
• /
• pp.43-49
• /
• 2009

Aspirin or acetylsalicylic acid, a member of the salicylate family, is frequently used as an analgesic, antipyretic, anti-inflammatory and antiplatelet drug. Because aspirin is chemically unstable in water and heat for tablet formulation, additives including lubricants are used in preparing aspirin tablets, using a dry-granulation process. Aspirin tablets are produced by a number of manufacturers which usually use their own unique combination of additives during the manufacturing process. In this study, we employed an NMR based metabolomics technique to identify the manufacturers of various aspirin tablets. Aspirin tablets from six different companies were analyzed by 1H 400 MHz NMR. The acquired data was then integrated and processed by principal component analysis (PCA). Based on the NMR data, we were able to identify peaks corresponding to acetylsalicylic acid in all of the six samples, whereas different NMR patterns were found in the aromatic and aliphatic regions depending on the unique additive used. These observations led to the conclusion that the differences in the NMR patterns among the different aspirin tablets were due to the presence of additives.

• Herbal Formula Science
• /
• v.15 no.2
• /
• pp.171-178
• /
• 2007

This study is clinical report for a acute stroke patient who was improved by treatment of a herbal medication. Stroke patients often shows spirit disorder in early stage. However, the cases which applied Onbyung theory are rare. This paper aims to show that Onbyung theory can be effective to acute stroke. We diagnosed the patient as invasion of the yong system by heat(熱入營分), which showed confusion, insomnia, delirium, anxiety, reddened tongue and dry mouth with cracked lip. After administration of Chungyung-tang(淸營湯) in Wen bing Tiao (溫病條辨), the patient showed those symptoms were highly improved. Thus, we concluded that Onbyung Theory can the patient be adapted to improve the symptom of acute stroke.

• Environmental Engineering Research
• /
• v.22 no.3
• /
• pp.266-276
• /
• 2017

A life cycle impact assessment was applied in an industrial waste incineration plant to evaluate the direct and indirect environmental impacts based on toxicity and non-toxicity categories. The detailed life cycle inventory of material and energy inputs and emission outputs was compiled based on the realistic data collected from a local industrial waste incineration plant, and the Korean life cycle inventory and ecoinvent database. The functional unit was the treatment of 1 tonne of industrial waste by incineration and the system boundary included the incineration plant and landfilling of ash. The result on the variation of the impact by the unit processes showed that the direct impact was decreased by 79.3, 71.6, and 90.1% for the processes in a semi dry reactor, bag filter, and wet scrubber, respectively. Considering the final impact produced from stack, the toxicity categories comprised 91.7% of the total impact. Among the toxicity impact categories, the impact in the eco-toxicity category was most significant. A separate estimation of the impact due to direct and indirect emissions showed that the direct impact was 97.7% of the total impact. The steam recovered from the waste heat of the incineration plant resulted in a negative environmental burden.