• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.131-143
• /
• 2003

Objective : The purpose of this study is to arrange the literature about acupuncture therapy on the hemorrhoids and hemorrhoid complicated by anal fistula. Methods : We arrange Huang Di Nei Jing and fifteen kinds of literature about the hemorrhoids and hemorrhoid complicated by anal fistula. Results : 1. The cause of hemorrhoids are overfatigue, overeating, imbalance of stool(const-ipation or diarrhea), uncontrol sexual excess or abstinence, pathgenic factors of wetness, heat, wind, dry, fire, chronical hemorrhoids that has not been treated, and general weakness. 2. Symptom of hemorrhoids is that skin is projected form the nine holes or varicose extension to become hemorrhoid. Hemorrhoids is small nodosity that projected on the anal inter or outer region, and hemorrhoid complicated by anal fistula is pus which comes out form one or some fistula on the anal around inter and outer region. 3. Therapy method of hemorrhoid and hemorrhoid complicated by anal fistula are elimination pathological heat from blood, promote blood flow to remove blood stasis, cold in nature and purge away fire, remove heat form the blood, promote blood flow to remove blood stasis, cold in nature and purge away fire, remove heat from the blood and eliminate dampness, tonify the spleen and replenish Ki, dispel wind and alleviate pain and so forth. Therapy method of hemorrhoid is to give the first consideration to relieve blood: eliminating pathological heat form blood complicated by anal fistula is to tonify the blood first, than after that eliminating pathological heat form blood. About external method are method of fumigation, method of ointment, method of close with medicine, necrotizing method and also operation(injection, bind etc.)was used for treatment. 4. The prescription are Gurgak-hwan, Wypi-hwan, Gunggyi-tang, Jingyochangchul-tang, Jingyobangpung-tang, Mokhyangbinrang-hwan, Ochi-san, Gamihyanso-san, Jojang-hwan, Sinyung-hwan used frequently. 5. food taboo on patient's diet of the hemorrhoid and hemorrhoid complicated by anal fistula are raw grain, cold or dampness food, alcohol, hot food, Singiberis rhizoma recens, Cinnamomi ramulus. 6. Acupuncture therapy on the hemorrhoid and hemorrhoid complicated by anal fistula are, in the first stage eliminating pathological heat form blood and eliminate dampness, and in the long term eliminate dampness, promote and remove meridian energy, remove that form the intestines, dispel channels and collaterals. 7. Acupuncture points at B2, CV1, B58, B36, B56, Sp5, S30, B25, B54, GV1, GV20, L6, B40 used frequently for the acupuncture therapy, and acupuncture point at GV4, GV1, B30, hemorrhoidal point used form moxibustion. Reduction blood at B40 and blue capillary of Sp9 and acupuncture Chungbaek, Ki-gack, Ki-jung, Ki-mun(Dongsh Kihyel) makes the treatment very effective.

• Journal of Animal Science and Technology
• /
• v.65 no.5
• /
• pp.989-1001
• /
• 2023

The study evaluated the effects of dietary fiber and energy levels administered during two growing periods (d 0-28 and d 29-56) for pigs exposed to a high temperature. A total of 96 growing pigs were used in six treatments as: Two treatments in thermoneutral temperature (21℃-24℃) with dietary energy of 3,300 and the inclusion of high or low fiber, two treatments in heat stress (30℃-34℃) with dietary energy of 3,300 and the inclusion of high or low fiber, and two treatments in heat stress with dietary energy of 3,450 and the inclusion of high or low fiber. Among standard energy level treatments, heat-stressed pigs showed lower average daily gain (ADG), feed intake, digestibility of dry matter, gross energy, crude protein, and crude fiber in phases 1 and 2. Moreover, higher concentrations of acetate, propionate, butyrate, and total short-chain fatty acid (SCFA) in feces were shown in pigs fed high fiber diets. There was a negative interaction between dietary fiber and energy for the fecal concentration of isobutyrate in phase 1 and valerate in phase 2. Pigs in heat stress treatments showed a higher rectal temperature, respiratory rate, hair cortisol, plasma zonulin, and fecal lipocalin-2. Among heat stress treatments, the overall ADG was increased in pigs fed high fiber. Pigs fed high dietary fiber showed a greater concentration of acetate, propionate, butyrate, and total SCFA. High fiber treatments decreased plasma zonulin. In conclusion, the inclusion of beet pulp, soluble fiber, at the level of 4% looks necessary in pigs diet during heat stress.

• Journal of Korean Society of Forest Science
• /
• v.33 no.1
• /
• pp.33-58
• /
• 1977

A bark comprises about 10 to 20 percents of a typical log by volume, and is generally considered as an unwanted residue rather than a potentially valuable resourses. As the world has been confronted with decreasing forest resources, natural resources pressure dictate that a bark should be a raw material instead of a waste. The utilization of the largely wasted bark of genus Pinus, Quercus, and Populus grown in Korea can be enhanced by learning its physical and mechanical properties. However, the study of tree bark grown in Korea have never been undertaken. In the present paper, an investigative study is carried out on the bark of three genus, eleven species representing not only the major bark trees but major species currently grown in Korea. For each species 20 trees were selected, at Suweon and Kwang-neung areas, on the same basis of the diameter class at the proper harvesting age. One $200cm^2$ segment of bark was obtained from each tree at brest height. Physical properties of bark studied are: bark density, moisture content of green bark (inner-, outer-, and total-bark), fiber saturation point, hysteresis loop, shrinkage, water absorption, specific heat, heat of wetting, thermal conductivity, thermal diffusivity, heat of combustion, and differential thermal analysis. The mechanical properties are studied on bending and compression strength (radial, longitudinal, and tangential). The results may be summarized as follows: 1. The oven-dry specific gravities differ between wood and bark, further more even for a given bark sample, the difference is obersved between inner and outer bark. 2. The oven-dry specific gravity of bark is higher than that of wood. This fact is attributed to the anatomical structure whose characters are manifested by higher content of sieve fiber and sclereids. 3. Except Pinus koraiensis, the oven-dry specific gravity of inner bark is higher than that of outer bark, which results from higher shrinkage of inner bark. 4. The moisture content of bark increases with direct proportion to the composition ratio of sieve components and decreases with higher percent of sclerenchyma and periderm tissues. 5. The possibility of determining fiber saturation point is suggested by the measuring the heat of wetting. With the proposed method, the fiber saturation point of Pinus densiflora lies between 26 and 28%, that of Quercus accutissima ranges from 24 to 28%. These results need be further examined by other methods. 6. Contrary to the behavior of wood, the bark shrinkage is the highest in radial direction and the lowest in longitudinal direction. Quercus serrata and Q. variabilis do not fall in this category. 7. Bark shows the same specific heat as wood, but the heat of wetting of bark is higher than that of wood. In heat conductivity, bark is lower than wood. From the measures of oven-dry specific gravity (${\rho}d$) and moisture fraction specific gravity (${\rho}m$) is devised the following regression equation upon which heat conductivity can be calculated. The calculated heat conductivity of bark is between $0.8{\times}10^{-4}$ and $1.6{\times}10^{-4}cal/cm-sec-deg$. $$K=4.631+11.408{\rho}d+7.628{\rho}m$$ 8. The bark heat diffusivity varies from $8.03{\times}10^{-4}$ to $4.46{\times}10^{-4}cm^2/sec$. From differential thermal analysis, wood shows a higher thermogram than bark under ignition point, but the tendency is reversed above ignition point. 9. The modulus of rupture for static bending strength of bark is proportional to the density of bark which in turn gives the following regression equation. M=243.78X-12.02 The compressive strength of bark is the highest in radial direction, contrary to the behavior of wood, and the compressive strength of longitudinal direction follows the tangential one in decreasing order.

• Korean Journal of Agricultural Science
• /
• v.9 no.1
• /
• pp.357-370
• /
• 1982

Recent concern regarding price and availability of fossil fuels has spurred the interest in alternative sources for farm crop drying. Among the available options such as biomass energy, wind power, nuclear energy and solar energy etc., the increasing attention is being directed to the utilization of heat from solar energy especially for farm crop drying. Even though solar energy is dispersed over a large land area and only a relatively small amount of energy can be simply collected, the advantages of solar energy is that the energy is free, non-polluting. The study reported here was designed to help supply the informations for the development of simple and relatively inexpensive solar warehouse for farm crop drying and storage. Specifically, the objectives of this study were to determine the performance of the solar collector fabricated, to compare solar supplemented heat drying with natural air drying and to develop a simulation model of temperature in stored grain, which can be used to study the effects due to changes in ambient air temperature. For those above objectives, solar collector was fabricated from available materials. Corrugated steel galvanized sheet, painted flat black, was used as absorbers and clear 0.2mm polyethylene sheet was the cover material. The warehouse for rough rice drying and storage was constructed with concrete block, and the solar collector was used as the roof of warehouse instead of original roofing system of it. The results obtained in this study were as follows: 1. The thermal efficiency of the solar collector was average 26 percent and the overall heat transfer coefficient of the collector was approximately $25kJ/hr.m^2\;^{\circ}K$. 2. Solar heated air was sufficient to dry one cubic meter of rough rice from 23.5 to 15.0 percent in 7 days and natural air was able to dry the same amount of rough rice from 20.0 to 5 percent in l2 days. 3. Drying with solar heat reduced the required drying time to dry the same amount of rough rice into a half compared to natural air drying, but overdrying problems of the bottom layer were so severe that these problems should be thoroughly analyzed. 4. Simulation model of temperature in stored grain was developed and the results of predicted temperature agreed well with test results. 5. Based on those simulated temperature, changes in the grain-temperature were a large at the points of the wallside and the damage of the grain would be severe at the contact area of wall.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.760-766
• /
• 2016

This study explored the effects of heating temperature and laminae thicknesses on the time required to heat the center of air-dried Paulownia tomentosa, Pinus sp., Abies sp., and Larix sp. laminae to $56^{\circ}C$, which is a minimum core temperature of wood packaging materials defined by ISPM 15 standard, and maintain for 30 minutes in dry heat treatment schedule. Heating times were different among wood species and were Pinus sp. ${\geq}$ Abies sp. > Paulownia tomentosa > Larix sp. in decreasing order. The differences in heating times of some species were significantly different statistically, but were not different enough in practical terms to warrant heating four species separately. Heating times decreased as heating temperature increased and followed approximately power-function relationship. Also, heating times increased linearly with increasing laminae thickness. These relationships make it possible to calculate intermediate heating times relative to experimentally observed heating times. The results of this study will serve as a guideline for heat sterilization of Chinese laminae species to meet heat treatment requirements for protection against invasive pests.

• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.147-157
• /
• 2006

To improve the properties of non-waxy rice flours for baking, soaked-wet milled rice flour (SWRF) was adjusted moisture content (MC) to 30 and 50 % and heated at 50 and $70^{\circ}C$ in a shaking water bath for 6 and 18 hrs, respectively. Moisture-heat treated rice flours were investigated with regard to particle size distribution, and morphological, physicochemical and pasting properties for comparing dry and wet milled flours. The particle size of rice flour treated with 30% MC was distributed between $4-20{\mu}m\;and\;100-200{\mu}m$, like SWRF. The particles above $200{\mu}m$ in the flour were produced at higher heating temperature. By SEM, starch granules were found in the rice flours treated with 30% MC, who whereas aggregated starch granules were shown in the flours treated with 50% MC. Moisture-heat treatment using higher MC and heating temperature decreased the lightness and increased the yellowness of non-waxy rice flours. Water binding capacity of 30% moisture treated rice flour was similar to that of SWRF. In the same moisture treated rice flour, swelling power was higher, but solubility was lower at $50^{\circ}C$ than at $70^{\circ}C$. The initial pasting temperature by RVA increased after moisture-heat treatment. The peak viscosity of moisture-heat treated rice flour was higher for 30% moisture than that of the others. The rice flour treated with 30% MC and heated at $50^{\circ}C$ showed low setback and increased stability for retrogradation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.126-137
• /
• 2014

Characteristics of heating and drying of Canadian-imported Douglas-fir timber using microwave in order to secure convenience and quality of drying timber and to get basic data for secondary conservation treatment are as follows: As the results of analysis of change curves of internal temperature of the timber after irradiating it, round timber and board timber showed stable heat distribution, heat consumption and surface water-content in heating with 30kW for 30 minutes and 120 minutes and with 40kW for 3 minutes and 9 minutes, respectively. Especially, surface water-content distribution according to heating by microwave showed very even leveling and water-content decrease rate was also more 30% compared to its weight showing excellent dry efficiency. And in case of soaking timbers into liquid chemicals for secondary conservation according to the analysis results of heat consumption, it is expected that large amount of preservative will be permeated. Therefore, timber heated by microwave is remarkably available for using industrial materials and developing secondary utilized products with its fast water-content decrease and dryness and higher heat consumption.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.199-206
• /
• 2017

A geological repository for the disposal of high-level radioactive waste is generally constructed in host rock at depths of 500~1,000 meters below the ground surface. A geological repository system consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer is indispensable to assure the disposal safety of high-level radioactive waste, and it can restrain the release of radionuclides and protect the canister from the inflow of groundwater. Since high temperature in a disposal canister is released to the surrounding buffer material, the thermal properties of the buffer material are very important in determining the entire disposal safety. Even though there have been many studies on thermal conductivity, there have been only few studies that have investigates the specific heat capacity of the bentonite buffer. Therefore, this paper presents a specific heat capacity prediction model for compacted Gyeongju bentonite buffer material, which is a Ca-bentonite produced in Korea. Specific heat capacity of the compacted bentonite buffer was measured using a dual probe method according to various degrees of saturation and dry density. A regression model to predict the specific heat capacity of the compacted bentonite buffer was suggested and fitted using 33 sets of data obtained by the dual probe method.

• Journal of Climate Change Research
• /
• v.1 no.2
• /
• pp.109-120
• /
• 2010

Heat wave is a disaster, which increases morbidity and mortality in temperate regions. Climate model results indicate that both intensity and frequency of heat wave in the future will be increased. This study shows the result about relationship between excess mortality and offensive airmass in 7 metropolitan cities, and an operational Heat-Health Warning System (HHWS) in Korea. Using meteorological observations, the Spatial Synoptic Classification (SSC) has been used to classify each summer day from 1982 to 2007 into specific airmass categories for each city. Through the comparative study analysis of the daily airmass type and the corresponding daily mortality rate, Dry Tropical (DT), and Moist Tropical plus (MT+) were identified as the most offensive airmasses with the highest rates of mortality. Therefore, using the multiple linear regression, forecast algorithm was produced to predict the number of the excess deaths that will occur with each occurrence of the DT and MT+ days. Moreover, each excess death forecast algorithm was implemented for the system warning criteria based on the regional acclimatization differences. HHWS will give warnings to the city's residents under offensive weather situations which can lead to deterioration in public health, under the climate change.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.5
• /
• pp.29-43
• /
• 2020

Thermal environment of city is getting worse due to severe urban heat island caused by climate change and urbanization. The cooling effect of street tree is regarded as a effective way to ameliorate the urban heat environment. The effect is largely made up of shadow formation and transpiration. This study aims to identify how the transpiration affects the discomfort index by analyzing comprehensive impact of the transpiration on the air temperature and relative humidity. The changes in the amount of transpiration, air temperature, and relative humidity were estimated for Seogyo-dong area which has a lot of floating population in Seoul, at 2 p.m. in dry day in July and August. On average, the transpiration of the street tree decreased the temperature 0.3℃ and increased the relative humidity 2.6% in an hour. As a result of these changes in temperature and humidity, the discomfort index rose mostly(0.036 on average). It was always get rise especially on the day when the discomfort index was above 80(0.05 on average). However, compared with the significant change in temperature and humidity, the variation of the discomfort index itself was very slight(up to 0.107). Therefore, the effect of transpiration by the street trees might not be effective in the planning to improve the thermal environment(especially on the day when the discomfort index is high). It is necessary to select the species of trees and planting location considering the cooling effect of shade formation synthetically.