• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.28-41
• /
• 2009

We know the several construction methods for underwater tunnel, but properly submerged concrete box type tunnel was mostly good structure stability and mostly shot length of tunnels. Submerged box type tunnel was buildup the unit segments in dry dock or ship yard by 10 to 20meters. The submerged box was composed with segments was join each together. It was installing the gate and waterproofing the coupling the front hull of a box. The complete submerged box rise up to the surface water, tow in the submerged box by tugboat, going to the destination of tunnel construction site. Beforehand dredge up soil at the bottom of a underwater, sinking the submerged box, connection together complete submerged box in underwater. The research and development ILM tunneling method is receiving careful study. Biggest weakness in submerged concrete box type tunnel was pressure waterproofing, box to box connecting, complete submerged boxes navigation and installation, after operation the submerged tunnel and management concrete box structure. It was positive evidence in submerged concrete box type tunnel. We make a practical application of the principle "the ILM tunneling method in underwater construction methods."

• 한국지진공학회논문집
• /
• 제27권3호
• /
• pp.129-137
• /
• 2023

This study presents a dry precast concrete (PC) beam-column connection, and its target seismic performance level is set to be emulative to the reinforced concrete (RC) intermediate moment resisting frame system specified in ACI 318 and ASCE 7. The key features include self-sustaining ability during construction with the dry mechanical splicing method, enabling emulative connection performances and better constructability. Test specimens with code-compliant seismic details were fabricated and tested under reversed cyclic loading, which included a PC beam-column connection specimen with dry connections and an RC control specimen. The test results showed that all the specimens failed in a similar failure mode due to plastic deformations in beam members, while the hysteretic response curve of the PC specimen showed comparable and emulative performances compared to the RC specimen. Seismic performance evaluation was quantitatively addressed, and on this basis, it confirmed that the presented system can fully satisfy all the required performance for the intermediate RC moment resisting frame.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.12-13
• /
• 2021

Methods for the manufacture, erection, and assembly of heavy frame modules were proposed. Interferences among precast members were prevented by using bolted metal plates for dry precast beam-to-column joints during assembly with a clearance for tolerance implementing grouted concrete filler plates instead of metal filler plates. Clearances for tolerances were provided to avoid conflictions among components during erection phases. These gaps were, then, grouted by high-strength mortar. The constructability of new connections of a beam-to-column joint using bolted metal plates for precast structures was examined using a full-scale assembly test in which practical observations indicated that members could be aligned and placed accurately in both horizontal and vertical directions, leading to a fast and convenient assembling. Bolt holes of the endplate were properly aligned using couplers with 30 mm fastened length embedded in the columns. The assembly test demonstrated the erection safety and structural stability of the proposed joints that were without filler plates when they were subjected to heavy loads at the time of their erection. The facile and rapid assembly of precast beam-to-column connections with a 30 mm tolerance was observed. The proposed assembly method is rapid, sustainable, and resilient, replacing the conventional methods of concrete frame construction, offering a connection that can be used in constructing infrastructure, such as buildings and pipe-rack frames.

• Steel and Composite Structures
• /
• 제20권5호
• /
• pp.999-1022
• /
• 2016

The use of Carbon Fiber Reinforced Polymer (CFRP) to strengthen steel structures has attracted the attention of researchers greatly. Previous studies demonstrated bonding of CFRP plates to the steel sections has been a successful method to increase the mechanical properties. However, the main limitation to popular use of steel/CFRP strengthening system is the concern on durability of bonding between steel and CFRP in various environmental conditions. The paper evaluates the performance of I-section steel beams strengthened with pultruded CFRP plate on the bottom flange after exposure to diverse conditions including natural tropical climate, wet/dry cycles, plain water, salt water and acidic solution. Four-point bending tests were performed at specific intervals and the mechanical properties were compared to the control beam. Besides, the ductility of the strengthened beams and distribution of shear stress in adhesive layer were investigated thoroughly. The study found the adhesive layer was the critical part and the performance of the system related directly to its behavior. The highest strength degradation was observed for the beams immersed in salt water around 18% after 8 months exposure. Besides, the ductility of all strengthened beams increased after exposure. A theoretical procedure was employed to model the degradation of epoxy adhesive.

• 한국건축시공학회지
• /
• 제17권4호
• /
• pp.341-348
• /
• 2017

콘크리트 포장도로는 동절기 제설제에 의한 내구성 저하가 심각한 위협으로 거론되고 있고 그 보수에도 많은 비용이 소요되고 있다. 따라서 이러한 콘크리트 포장재에 대한 적절한 보수 대책의 마련과 이에 활용될 우수한 성능의 보수 재료가 요구되고 있는 상황인데, 본 연구에서는 국내에서 개발된 인산마그네슘 세라믹(Magnesium phosphate ceramics)을 대상으로 압축강도 특성 및 염소이온 침투 저항성, 길이변화 특성을 평가하여 국내 콘크리트 포장 도로의 보수 재료로 적용 가능성을 검토하였다. 평가 결과 모르타르의 유동성은 190mm의 평범한 수준을 나타내었으나 다소 점성이 높고 재료 자체의 흐름성은 크지 않았다. 응결 시간은 12분으로 매우 빠른 경화가 이루어졌으며 이에 따라 신속한 작업이 요구되었다. 모르타르의 압축강도 성능은 2시간에 38.4MPa, 24시간에 73.8MPa, 28일에 111.0MPa로 재령 초기부터 높은 수준을 나타내었다. 염소이온 침투 저항성 시험 결과 모르타르의 경우 143 Coulombs, 콘크리트의 경우 173 Coulombs으로 매우 우수한 수준을 나타내었다. 콘크리트의 길이변화 시험 결과는 재령 40일까지 $60{\times}10^{-6}$ 이하로 완만하게 감소하였으며, 보통의 시멘트 콘크리트의 길이변화 수준과 비교할 때 1/10 이하의 수준으로 우수한 체적안정성을 확보하고 있었다. 이상과 같이 인산마그네슘 세라믹은 우수한 강도 성능과 염소이온 침투 저항성, 체적 안정성을 보유하고 있음을 확인하였고, 향후 작업 시간이나 작업성에 대한 개선이 요구되며, 현장 적용시에는 이러한 부분에 대한 주의가 필요하다.

• 한국건축시공학회지
• /
• 제5권2호
• /
• pp.131-138
• /
• 2005

Most concrete is recently made of an aggregate which is properly absorbed, and carried in it in order to do capability at every fields. We have been close to demand new rapability of high flowing and enduring for specific concretes. That is difficult to cope with claiming the efficiency on deterioration from lack of a high quality aggregate. Therefore, For solving the problems we apply to a packing method for using dried materials. That is to say that it is a kind of making into an instant. In this study. There is a purpose to present fundamental data, comparing and analyzing a phenomenon of aggregate's absorption following the rate of adding water, for using existing materials.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.173-174
• /
• 2017

Although the application period of hot weather concrete in our country is two months of July~August which is relatively short, many problems in various aspects such as generation of plastic/dry contraction cracks and cold joints can be caused unless proper quality control measures are established at this time. Therefore, this study compared the temperature history of the placed concrete by applying a mono white and aluminum-deposited bubble sheet developed with surface coating curing materials for surface exposure and summer to an actually constructed apartment slab. The analysis result showed that the mono white bubble sheet is the best method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.219-220
• /
• 2021

As the area where stone is used in buildings increases, the amount of stone processing increases, and the amount of dust generated in the processing process is increasing, but interest in this is insignificant. In addition, as a result of investigating the dust generated in the dry process, the proportion of SiO2 is about 70%, so there is a concern about the risk of pneumoconiosis caused by breathing. Therefore, it is judged that it is urgent to collect it at the source to prevent damage to workers and environmental pollution.

• 도시과학
• /
• 제7권2호
• /
• pp.29-36
• /
• 2018

The demand for reinforcement in accordance with remodeling, seismic retrofit, and change of use of the existing structure is increasing. Originally, shear wall new and extension method has been adopted a lot as seismic retrofit methods. Recently, dry seismic retrofit method that uses structural steel is mostly adopted in order to minimize spatiotemporal aspect and underpinning that occurs when a construct shear wall. We redesigned the form of old and new concrete joint high-shear ring anchor that was developed according to recent reinforcement method and determined construction method. Shear tests were performed on High-Shear Ring Anchor for steel-concrete connection. Comparison with 4 tests shows that the average of test-to-prediction ratios is 1.01.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.506-513
• /
• 2021

철근콘크리트 구조물의 내구성 및 안전성은 콘크리트의 균열 및 강도와 더불어 철근의 배근상태나 콘크리트 피복 두께에 크게 의존한다. 콘크리트 내에 매립되어 있는 철근 정보를 정확히 파악하는 방법엔 국부 파괴법과 비파괴 철근 탐사 시험이 있다. 일반적으로 부재 손상을 최소화하기 위해 비파괴 철근 탐사 시험을 통해 파악하며, 비파괴 철근 탐사 시험에는 전자파레이더법, 전자기유도법, 방사선법 등이 있다. 콘크리트의 함수율과 온도는 콘크리트의 전기적 특성인 유전율에 영향을 미쳐 비파괴 철근 탐사 시험 결과에 간섭을 방생시킨다. 따라서 본연구에서는 콘크리트의 표면수율과 온도에 따라 전자파레이더법과 전자기유도법이 받는 영향을 분석하였다. 장비와 기술의 발달로 원리와 상관없이 24℃ 시험체에서는 평균 오차율이 5% 이하로 나타났으며 특히 전자기유도법의 경우 매우 높은 정확성을 갖는 것을 확인하였다. 전자파레이더법은 습윤상태보다 건조상태에서 상대적으로 오차율이 작은 특성을 나타내었으며, 고온에서는 다소 높은 오차율이 나타났다. 탐사 대상의 온도가 낮고 건조한 경우 전자파레이더법을 적용하고, 탐사 대상이 습윤상태이거나 고온에서는 전자기유도법을 사용하여 오차를 감소시킬 수 있음이 확인되었다.