• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.106-110
• /
• 2006

If drugs are made from nanoparticles, their formulations can be more effective than the conventional ones. Especially, water insoluble drugs having low absorption rates into our body could show improvement in their adsorption and bioavailability by decreasing their particle sizes to nanometers. In this study, polyvinylpyrrolidone (PVP) and various sugars were employed as stabilizers for the nanoparticles of a water insoluble drug, Itraconazole. Nanoparticles were successfully produced by the wet slurry process for five days. Then, spray drying converted the aqueous dispersions into dry powders, and the redispersibility of dried nanoparticles into water was investigated. The effects of temperature, pressure, and flow rate were studied to understand the importance of processing variables on redispersibility. It was found in particle size analysis that nanoparticles containing sugars have better redispersibility than those without sugars. Additionally, the mainly spherical morphology of dried nanoparticles was identified by SEM (Scanning Electron Microscopy) and AFM (Atomic Force Microscopy).

• The Korean Journal of Food And Nutrition
• /
• v.25 no.2
• /
• pp.324-329
• /
• 2012

The evaluated physicochemical and sensory properties of freeze-dried Shingo pears(Pyus pyritolia Niitaka), cultivated at Cheonan city, prepared using different sugar concentration of blanching solution we evaluated. Sliced Shingo pears(5 mm and 7 mm thickness) were blanched in sugar solution(0, 3, 5, 7, 10%) and freeze-dried to make dried fruits snack. The firmness of the pear snack sliced in 7 mm portions was greater than the pear snacks sliced in 5mm pieces. However in sensory evaluation, pear snacks sliced in 5 mm portions showed higher scores. pH and titratable acidity showed no significant difference in the blanching process. Concentration of total phenollic compound in fresh pear was 3.7 mg% but freeze-dried pear snacks showed higher values at 15 mg%. Sensory evaluation tests showed that the scores for texture decreased as the thickness of the snack and sugar concentration of blanching solution increased; however the score increased(p<0.05). Color intensity and overall acceptability scores were highest in pear snacks sliced in 7 mm pieces and blanched with 7% sugar solution.

• Food Science of Animal Resources
• /
• v.22 no.1
• /
• pp.50-54
• /
• 2002

The aim of this work to determine the formation of lactulose during heat treatment process as a contribution to the estabilishment of limits of chemical indicators for different types of heat processed milk and analyze of lactulose for the reconstituted milk added samples. The HTST(75$\^{C}$/15s) and UHT(130$\^{C}$/2∼3s) treatment realized with a pilot plant and heat-treated samples were stroed at 4, 10, 30$\^{C}$ for 4 weeks. Changes in lactulose was evaluated at 7 days intervals. The other heat treatment was sealed in glass tube and heated at 75$\^{C}$ for 10 to 120s and heated at 130$\^{C}$ for 2 to 60s in a thermostatically controlled constant temperature bath of glycerol. The reconstituted milk was made with full fat dry milk that reconstituted with deionized water to 10% total solid, and was added to milk at 10, 20, 30% respectively. The samples processed with a HTST pilot plant showed that lactulose was contained at 1.47∼1.52mg/10()ml and 8.19 ∼8.32mg/100ml for UHT-treated samples. Changes in the lactulose content of heat-treated samples during storage at 4 and 10$\^{C}$ for 4 weeks caused a slight increase, however a noticeable increase was observed at 30$\^{C}$ for 4 week. The glass tube samples showed that high correlations between relative increase in content of lactulose and increasing processing times(75$\^{C}$ : r = 0.986, 130$\^{C}$ : r = 0.987, respectively). Added with reconstituted milk would cause a increase of the lactulose content linear with increasing addition amount(r = 0.982). This results observed for lactulose in commercial milk samples would applied to the detection of chemical changes during heat treatment and illegal use of reconstituted milk.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.126-137
• /
• 2014

Characteristics of heating and drying of Canadian-imported Douglas-fir timber using microwave in order to secure convenience and quality of drying timber and to get basic data for secondary conservation treatment are as follows: As the results of analysis of change curves of internal temperature of the timber after irradiating it, round timber and board timber showed stable heat distribution, heat consumption and surface water-content in heating with 30kW for 30 minutes and 120 minutes and with 40kW for 3 minutes and 9 minutes, respectively. Especially, surface water-content distribution according to heating by microwave showed very even leveling and water-content decrease rate was also more 30% compared to its weight showing excellent dry efficiency. And in case of soaking timbers into liquid chemicals for secondary conservation according to the analysis results of heat consumption, it is expected that large amount of preservative will be permeated. Therefore, timber heated by microwave is remarkably available for using industrial materials and developing secondary utilized products with its fast water-content decrease and dryness and higher heat consumption.

• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.41-64
• /
• 2011

This article investigates the interrelationships in daily returns using fractionally integrated error correction term and volatilities using constant conditional correlation and dynamic conditional correlation GARCH with asymmetries between Capesize and Panamax markets. Our findings are as follows. First, for the fractionally cointegrated error correction model, there is a unidirectional relationship in returns from the Panamax market to the Capesize market, but a bidirectional causal relationship prevails for the traditional error correction models. Second, the coefficients for the error correction term are all statistically significant. Of particular interest are the signs of the estimates for the error correction term, which are all negative for the Capesize return equation and all positive for the Panamax return. Third, there are bidirectional volatility spillovers between both markets and the direction of the information flow seems to be stronger from Panamax to Capesize. Fourth, the coefficients for the asymmetric term are all significantly positive in the Capesize market, but the Panamax market does not have a significant effect. However, the coefficients for the asymmetric term are all significant, implying that the leverage effect does exist in the Capesize and Panamax markets.

• Clean Technology
• /
• v.18 no.3
• /
• pp.287-294
• /
• 2012

In this study, performances of two cleaning methods were analyzed and a cleaning system was designed to develop a cleaning process of electronic components to remanufacture old laser copy machine. First, plasma cleaning as a dry cleaning method was executed to test cleaning ability. In cleaning of printed circuit board (PCB) by plasma, some damages were found near the metal parts, and considering the productivity, this method was not adequate for the cleaning of electronic components. With 4 different cleaning agents, ultrasonic cleaning tests were executed to select an optimal cleaning agent, aqueous agents showed superior cleaning performance compared to semi-aqueous and non-aqueous agents. Cleaning with aqueous cleaning agent A and 28 kHz ultrasonic frequency can be completed in 30 sec to 1 min. Finally, an ultrasonic cleaning system was constructed based on the pre-test results. Optimal cleaning conditions of 40 kHz and $50^{\circ}C$ were found in the field test. The productivity and economic efficiency in remanufacturing of laser copy machine are expected to increase by adapting developed ultrasonic cleaning system.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.947-954
• /
• 1997

Selected physical properties of cornmeal extrudates fortified with dairy products and extrusion process by $CO_2$ gas injection were analysed. Dairy products including whole milk powder, whey protein concentrate non-fat dry milk, and sodium caseinate were tested at the addition of 10% and 20%, based on cornmeal weight. $CO_2$ gas was injected to the barrel at the pressure of 0.7 and 1.4 MPa. Specific mechanical energy (SME) input was decreased by the addition of dairy products. Sodium caseinate had a little effect on decreasing the SME input, however whole milk powder tremendously reduced SME input when the concentration increased. An increase in milk product content resulted in increasing the piece density at the injection pressure of 0.7 MPa. At both 10% and 20% milk product content, the piece density was lowest at the injection pressure of 0.7 MPa. The sectional expansion index was highest at the injection pressure of 0.7 MPa. However, the specific length was constantly increased with the increase in $CO_2$ injection pressure. Water absorption index was decreased and water solubility index was increased by the addition of milk products. The injection pressure of $CO_2$ was optimum at 0.7 MPa. The addition of whole milk powder limited to puff the melt, but the other milk products tested resulted in puffing with $CO_2$ injection to 1.4 MPa.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.115-130
• /
• 2004

Plant-based cultural assets using straw and grass as household goods of our people's have been used as indispensable tools for practical living for a very long time. However, only a limited number of artifacts were unearthed so far due to tile fragility of the material. For this reason, research on plant-based cultural properties had close to no progress, and the appropriateness of the PEG method, high-grade alcohol method, alcohol--ether-resin method, and Paraloid B-72 used in preserving plant-based cultural properties has not been sufficiently investigated. Therefore, this study examined the weight change rate by applying the methods of Primal MC-76 and vacuum freeze-drying used mostly as a earth-layer hardening material among PEG and acrylic resin, which are applied widely for preservation of waterlogged archaeological wood, as a means to preserve plant-based cultural properties along with the examination of the subject material, and an experiment was also performed on moisture absorption. The findings as a result were, first, the plant-based material being studied was found to be Typha (Typha orientalis Presl). Secondly, the weight change experiment applying $PEG\#400$ and $PEG\#4000$ confirmed a steady increase of weight if PEG -2Step is used for treatment. Third, in preserving all subject materials with soil, treatment with $PEG\#4000$, Primal MC-76, and vacuum freeze-drying showed that tile vacuum freeze-drying method resulted in the largest or $20\%$ reduction in weight, while Primal MC-76 resulted in $18\%$ and $PEG\#4000$ in $8\%$ of weight reduction. It was concluded that, considering the stability of soil measurement, this came to be because resin permeation was carried out along with tile drying process. Fourth, the weight changes were found to be around $10\%$ in various humidity conditions after the preservation treatment. The greatest weight change rate was seen in the case of $PEG\#4000$, particularly having chemicals gush out in a high humidity (RH $84\%$ or higher) environment. In the case of Primal MC-76 and vacuum freeze-drying methods, $6\~8\%$ weight changes were detected, and the lowest weight change was found in the case of the vacuum freeze-drying method. Fifth, as for color changes after treatment, blackening occurred most strongly with $PEG\#4000$, while Primal MC-76 and vacuum freeze-drying manifested colors closest to dry straw or grass. However, the texture of straw was not very evident in the case of Primal MC-76, due to a glossy surface, but vacuum freeze-drying was found to offer tile best result in terms of texture. Putting together the results of the above experiments, vacuum freeze-drying presented after being treated with PEG2-Step the most stabilized changes in weight, while it offered the smallest change in color as well.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.66-72
• /
• 1983

In order to improve the quality of salted sea mustard, the conditions of blanching, salting, and storage were examined. The process in which sea mustard was blanched for 20 seconds in boiling seawater, soaked in saturated brine solution for 20 hours and then salted for 10 hours by the spreading 10~20% (w/w) of granulated dry salt to obtain the moisture content of about 60% or below, resulted a good color retention of chlorophyll and carotenoid pigments, and organoleptic quality. The shelf-life of the product estimated by 30-40% pigment retention was 50-60days when stored at $4^{\circ}C$ or below.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.