• 제목/요약/키워드: Dry Areas

검색결과 647건 처리시간 0.031초

Influence of Sowing Time on Growth, Yield and Nutritional Quality of Forage Rape in Spring

  • Kwon, Byung-Sun;Shin, Jeong-Sik;Park, Hee-Jin;Shin, Jong-Sup;Choi, Seong-Yu
    • Plant Resources
    • /
    • 제6권1호
    • /
    • pp.11-15
    • /
    • 2003
  • To determine as optimal sowing time of forage rape in spring time in southern areas of Korea, forage rape cv. Velox, the highest yielding variety among introduced varieties of forage rape, was grown under five different sowing times. Yield components such as plant length, number of branches and number of leaves etc. were higher at the sowing time of Mar. 15 and Mar. 25. The plants sown at Mar. 15 and Mar. 25 also showed highest fresh and dry matter yield. When plants were grown under later sowing time, they showed higher values in content of crude protein and lower values in contents of crude fiber such as Neutral Detergent Fiber (NDF), Acid Detergent Fiber (ADF), cellulose and lignin. There was no relationship between variation of In Vitro Dry matter Digestibility (IVDMD) and sowing time. The plants sown at Mar. 15 and Mar. 25 showed highest digestible dry matter yields.

  • PDF

군산해역에 있어서 소규모 바다목장화를 위한 해양저질 환경 평가 (Environmental Evaluation of Sediment Quality for Small Scale Marine Ranch around the Gunsan Coastal Areas)

  • 김종화;김종규;박병수
    • 수산해양교육연구
    • /
    • 제20권3호
    • /
    • pp.508-519
    • /
    • 2008
  • Hot air drying is a method that let moistures evaporate by heat exchange between heating air and dry target. This way is dominating more than about 70% of dryers that the use extent is wide fairly, and is established in domestic than dryer that use conduction or radiation etc. Most of research about drying had been emphasized in size of device through analysis for these dry phenomenon plain, heating topology, and aspect of form and so on by dry target's special quality, and research about device development or waste heat withdrawal technology in energy utilization efficiency side is slight real condition. Therefore, in this study, Investigated numerically about thermal efficiency elevation that is leaned against as that change the temperature of inlet and outlet in heat exchanger of the hot air drying tower.

답전작 왕골 재식밀도 차이에 따른 수량변이 (Effects of Planting Density of Wanggol (Cyperus iwasaki Makino) on Dry Cortex and Medulla Yield at Rice Field)

  • 권병선
    • 한국자원식물학회지
    • /
    • 제17권2호
    • /
    • pp.102-106
    • /
    • 2004
  • 남부 지방의 답전작 재배에 적합한 왕골의 재식밀도를 구명코자 다수성 품종으로 선발된 광산조생종을 공시하여 시험했다. 그 결과, 경장, 분얼수, 출수된 경수, 경태 등의 수량구성형 질은 18${\times}$18 cm 이식구에서 가장 우수하였고, 건피수량, 건수 수량에서도 18${\times}$18 cm 이식구에서 가장 우수하였다.

답전작 왕골 이식기 차이에 따른 수량변이 (Effects of Transplanting Time of Wanggol (cyperus iwassaki Makino) on Dry Cortex and Medulla Yield at Rice Field)

  • 권병선
    • 한국자원식물학회지
    • /
    • 제17권2호
    • /
    • pp.135-138
    • /
    • 2004
  • 남부지방에서 답전작 재배로 적합한 이식기를 구명코자 다수성 품종으로 선발된 광산조생 재래종을 공시하여 시험을 수행하였다. 경장, 분얼수는 5월 10일과 5월 20일 이식구에서 가장 우수하였으며 출수된 경수와 경태(장경, 중경, 단경)은 5월 20일 이식구에서 가장 우수하였다. 또한 건피 수량(장경, 중경, 단경)과 건수수량은 5월 20일 이식구에서 가장 우수하였다.

Influence of Plant Density on Growth, Yield and Nutritional Quality of Forage Rye

  • Kwon, Byung-Sun
    • Plant Resources
    • /
    • 제7권3호
    • /
    • pp.170-173
    • /
    • 2004
  • To determine optimal plant density of forage rye in southern areas of Korea, forage rye cv. Paldanghomil, the highest yielding variety among experimental varieties of forage rye, was grown under five different plant density. Yield components such as plant height, and number of leaves were highest at the broad casting. Plants sown at broadcasting also showed highest fresh and dry matter yield. When plants were grown of the broad casting, they showed higher values in content of crude protein and lower values in contents of crude fiber such as neutral detergent fiber(NDF), acid detergent fiber(ADF), cellulose and lignin. There was no relationship between variation of in vitro dry matter digestibility(IVDMD) and plant density. Plants sown at the broad casting showed highest digestible dry matter yields.

  • PDF

셀룰로오스계 파일직물의 탄화가공 (A Study on the Burn-out Printing of Cellulose-blend Velvet)

  • 김호정
    • 한국의류학회지
    • /
    • 제23권5호
    • /
    • pp.757-763
    • /
    • 1999
  • The burn-out technique is used to result in the velvet cloth being patterned in open and solid areas by carbonize the cellulose fiber. It is examined how to burn out the cellulose part of the velvet without damage of the other part. The print paste indalca solution is mixed with sodium hydrogensulfate and lycerine and then screen-printed on the back side of the velvet. The effects of process conditions such as concentration of sodium hydrogensulfate dry heat fixation temperature and time pull no. and glycerine contents on the properties of ground farics were investigated. The yellowness index and the breaking load of silk ground fabrics afected by the process conditions especially concentration of sodium hydrogensulfate dry heat fixation temperature.

  • PDF

DEVELOPMENT OF THE ENIGMA FUEL PERFORMANCE CODE FOR WHOLE CORE ANALYSIS AND DRY STORAGE ASSESSMENTS

  • Rossiter, Glyn
    • Nuclear Engineering and Technology
    • /
    • 제43권6호
    • /
    • pp.489-498
    • /
    • 2011
  • UK National Nuclear Laboratory's (NNL's) version of the ENIGMA fuel performance code is described, including details of the development history, the system modelled, the key assumptions, the thermo-mechanical solution scheme, and the various incorporated models. The recent development of ENIGMA in the areas of whole core analysis and dry storage applications is then discussed. With respect to the former, the NEXUS code has been developed by NNL to automate whole core fuel performance modelling for an LWR core, using ENIGMA as the underlying fuel performance engine. NEXUS runs on NNL's GEMSTONE high performance computing cluster and utilises 3-D core power distribution data obtained from the output of Studsvik Scandpower's SIMULATE code. With respect to the latter, ENIGMA has been developed such that it can model the thermo-mechanical behaviour of a given LWR fuel rod during irradiation, pond cooling, drying, and dry storage - this involved: (a) incorporating an out-of-pile clad creep model for irradiated Zircaloy-4; (b) including the ability to simulate annealing out of the clad irradiation damage; (c) writing of additional post-irradiation output; (d) several other minor modifications to allow modelling of post-irradiation conditions.

간척지의 제염정도에 따른 식생의 변이의 수도근모형성에 관한 연구 (Studies on the Variation of Vegetation and Rice Root Formation Accompanied with the Desaltation at the Reclaimed! Tidal Fields)

  • 권혁지;정원일;조재영
    • 한국작물학회지
    • /
    • 제28권3호
    • /
    • pp.305-309
    • /
    • 1983
  • 간척지에서의 제염에 따른 식생의 변화와 수도의 근모형성에 대한 염해의 영향을 알기 위하여 강화도, 남양 및 계화도 간척지를 중심으로 1982년 여름에 본 조사를 하여 다음과 같은 결과를 얻었다. 1. 간척후, 저습지에서는 퉁퉁마디와 칠면초가 최초로 우점종을 형성하는 고등식물이었으며, 제염이 됨에 따라 버들명아주가 출현했고, 또 이것에 이어 매자기와 갈대가 우점종의 자리를 차지하게 되며 매자기와 갈대가 우점종이 되는 염도의 토양에서는 수도재배에 대한 염해의 영향은 문제화되지 않았다. 2. 습지에서는 퉁퉁마디와 칠면초에 이어 사철쑥과 갯개미취가 우점종을 형성하게 되고, 이때에는 단자엽 화본료 잡초들의 이입이 시작되었다. 3. 건조지에서는 나문재와 해홍나물이 최초의 우점 고등식물로 등장하게 되고, 또 갯능쟁이도 있었지만 군락을 형성하지는 않았다. 4. 건조지에의 식물이입은 습지를 중심으로 이미 이입된 식물들이 제염이 진행됨에 따라 서서히 일어나게 된다. 5. 토양염도의 근모형성에 대한 형향은 고염도토양에서 생육된 것일수록 저염도 토양에서 생육된 것에 비하여 근모형성율은 낮추고, 또 근모장도 짧게 하는 것으로 나타났다.

  • PDF

조사료 생산을 위한 농업기계의 적정모형 설정 (Establishment of Optimum Pattern of Farm Machinery for Forage Production)

  • 김건엽;김정갑;한민수
    • 한국초지조사료학회지
    • /
    • 제15권3호
    • /
    • pp.222-230
    • /
    • 1995
  • This study was canied out to ddermine optimum areas for various sizes of land coverage of the farm machinery utilization in 1993-1994. A kind of machinery size and work systems were classed as the power tiller of 10HP+man power, the tractor of 35~46HP (tractor of 64~86HP and attachment were leased to harvest work), 64-86HP+ attachment and 90- 105HP+ attachment, respectively. \ulcornerhe results are summarized as follows: 1. The optimum areas of tractors of 90~105HP, 64~86HP and the power tiller of lOHP were estimated as 21.9 (corn-rye cropping system)- 26.9ha (sorghum $\times$ sudangrass - rye cropping system), 14.7 - 22.8ha and 1.2 - 1.61ha, respectively. The break-even-point areas of the tractors of 90-105HP. 64-86HP and the power tiller of lOHP were 16.6 (corn-rye cropping system)- 19.9ha (sorghum $\times$ sudangrass - rye cropping system), 12.5 - 16.lha and 0.12-0.13ha, respectively. 2. The optimum areas (land sizes, annual field capacity) for 50 cows by feeding rate(%) of roughage to concentrate were 6.8ha, 13.6ha in the 4060, 8.5ha, 17.0ha in the 5050 and 10.2ha, 20.4ha in the 60:40, and in case of 30 cows, it were 4.lha, 8.2ha in the 40:60, respectively. In the former case for the form of work system was the trador of 90-105HP+attachment and 64~86HP+ attachment, and the latter was the tractor of 35~46HP (tractor of 64~86HP and attachment were leased to harvest work) and 64-86HP+ attachment. 3. Productiori cost for corn-rye cropping system reducted to 51.8% in 102.9 wonkg dry matter the tractor of 90~ 105HP+ attachment with 213.4 wonkg dry matter the power tiller of 10HP+ man power.

  • PDF