• Korean Journal of Organic Agriculture
• /
• v.12 no.2
• /
• pp.209-217
• /
• 2004

The aim of this experiment was to investigate the effects of applying times and dilution rates of cattle slurry on dry matter yields of orchard grass. Cattle slurry was applied at the rates of average mineral nitrogen fertilizer equivalent to 150 kg/ha/year in 3 cutting frequency. Significantly higher dry matter yields than that of no fertilization (3.04 ton DM/ha) were recorded in the application of diluted cattle slurry(5.38~6.25 ton DM/ha) (p<0.05). Especially, this tendency was shown with higher annual dry matter yields at the partitioned dressing times, such as at the applications for 1st and 2nd growth, 1st and 3rd growth, and 1st, 2nd and 3rd growth respectively. The yields of annual dry matter both at fertilizing phosphorus and potassium, and phosphorus, potassium and nitrogen were higher than no fertilization as 5.41 tons and 8.78 tons per ha respectively. However, with application of diluted cattle slurry, dry matter yield par year (5.84 ton DM/ha) was higher than those of fertilizing phosphorus and potassium. The efficiencies of dry matter production with mineral and cattle slurry nitrogen application (kg DM/kg N) were 225 and 15.8~18.7 kg DM/kg N respectively. Especially, these tendencies were higher in diluted application plots than in no-diluted application plots of cattle slurry.

• Nuclear Engineering and Technology
• /
• v.36 no.4
• /
• pp.338-345
• /
• 2004

This study examines the sensitivity of several fabrication parameters for dry process fuel, using a random sampling technique. The in-pile performance of dry process fuel with irradiation was calculated by a modified ELESTRES code, which is the CANDU fuel performance code system. The performance of the fuel rod was then analyzed using a Monte Carlo simulation to obtain the uncertainty of the major outputs, such as the fuel centerline temperature, the fission gas pressure, and the plastic strain. It was proved by statistical analysis that for both the dry process fuel and the $UO_2$ fuel, pellet density is one of the most sensitive parameters, but as for the fission gas pressure, the density of the $UO_2$ fuel exhibits insensitive behavior compared to that of the dry process fuel. The grain size of the dry process fuel is insensitive to the fission gas pressure, while the grain size of the $UO_2$ fuel is correlative to the fission gas pressure. From the calculation with a typical CANDU reactor power envelop, the centerline temperature, fission gas pressure, and plastic strain of the dry process fuel are higher than those of the $UO_2$ fuel.

• Nuclear Engineering and Technology
• /
• v.45 no.1
• /
• pp.115-124
• /
• 2013

Among the several options to solve PWR spent fuel accumulation problem in Korea, the dry storage method could be the most realistic and applicable solution in the near future. As the basic objectives of dry storage are to prevent a gross rupture of spent fuel during operation and to keep its retrievability until transportation, at the same time the importance of a spent fuel integrity evaluation that can estimate its condition at the final stage of dry storage is very high. According to the national need and technology progress, two representative nations of spent fuel dry storage, the USA and Japan, have established different system temperature criteria, which is the only controllable factor in a dry storage system. However, there are no technical criteria for this evaluation in Korea yet, it is necessary to review the previously well-organized methodologies of advanced countries and to set up our own domestic evaluation direction due to the nation's need for dry storage. To satisfy this necessity, building a domestic spent fuel test database should be the first step. Based on those data, it is highly recommended to compare domestic data range with foreign results, to build our own criteria, and to expand on evaluation work into recently issued integrity problems by using a comprehensive integrity evaluation code.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.1
• /
• pp.39-48
• /
• 2005

Nitrogen and sulfur deposition was measured on Lake Pal dang from March 2002 to October 2003. Wet and dry depositions were separately measured using wet- and dry-only samplers, respectively. In order to measure the dry deposition to the water body, a dry deposition sampler composed of three pans filled with pure water, called the deposition water, was used. Since ammonium was generally in excess in ambient air, more than half of ammonium was present in the gaseous form. Ammonium concentration was also generally higher than the sum of major anion concentrations in the deposition water because gaseous species were much easily deposited than the species in fine particles. Nevertheless, the contribution of gaseous ammonia to the deposition of ammonium was not high as well as that of particulate ammonium while the contribution of gaseous nitric acid was much higher than that of particulate nitrate. Annual wet deposition fluxes of nitrogen and sulfur were five and six times higher than their dry deposition fluxes, respectively. Except for ammonium, the dry deposition flux estimated in the present work was a half of the previous results. This was mainly caused by much smaller dry deposition velocities over the water than over the ground.

• Journal of the Korean Ceramic Society
• /
• v.55 no.1
• /
• pp.44-49
• /
• 2018

The use of fossil fuels is steadily increasing. The thermal power generation industry uses a lot of energy and emits a large amount of greenhouse gases. On the other hand, a desulfurization facility can be installed to remove sulfur content during boiler combustion process of the power plant. Dry desulfurized gypsum generated from dry desulfurization facilities is suitable as a $CO_2$ absorbing material due to the presence of CaO. In this study, the carbonation properties of dry desulfurized gypsum were investigated by carbonizing dry desulfurized gypsum via mixing with water and stirring. As a result of microstructural, XRD and thermal analyses of the carbonized dry desulfurized gypsum, the carbonation age was found to be suitable for 16 h. Dry desulfurized gypsum absorbs about 16% of $CO_2$ per unit weight.

• Electrical & Electronic Materials
• /
• v.10 no.1
• /
• pp.8-14
• /
• 1997

The UV/O$_{3}$ dry cleaning has been well known in removing organic molecules. The UV/O$_{3}$ dry cleaning method was performed to clean the Si wafer surfaces and contact holes contaminated by organic molecules such as residual PR. During the cleaning process, the Si surfaces were analyzed with X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM) and ellipsometer. When the UV/O$_{3}$ dry cleaning at 200'C was performed for 3 minutes, the residual photoresist was almost removed on Si wafer surfaces, but Si surfaces were oxidized. For UV/O$_{3}$ application of contact hole cleaning, the contact string were formed using the equipment of ISRC (Inter-university Semiconductor Research Center). Before Al deposition, UV/O$_{3}$ (at 200.deg. C) dry cleaning was performed for 3 minutes. After metal annealing, the specific contact resistivity was measured. Because UV/O$_{3}$ dry cleaning removed organic contaminants in contact holes, the specific contact resistivity decreased. Each contact hole size was different, but the specific contact resistivities were all much the same. Thus, it is expected that the UV/O$_{3}$ dry cleaning method will be useful method of removal of the organic contaminants at smaller contact hole cleaning.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.5
• /
• pp.355-360
• /
• 2003

The responses of six mungbean [Vigna radiata (L.) Wilczek] varieties to Rhizobium inoculation on number and dry weight of nodules, nitrogenase activity of root nodule bacteria, dry weight of shoot and root, nitrogen content, and uptake by shoot were investigated. The mungbean varieties were BARI Mung-2, BARI Mung-3, BARI Mung-4, BARI Mung-5, BINA Moog-2, and BU Mung-1. Two-third seeds of each variety were inoculated with Rhizobium inoculant and the remaining one-third seeds were kept uninoculated. Rhizobium strains TAL 169 and TAL 441 were used for inoculation of seeds. Inoculation of seeds with Rhizobium strains significantly increased nodulation, nitrogenases activity, dry matter production, nitrogen content, and uptake by shoot of the crop compared to uninoculated control. There was positive correlation among the number and dry weight of nodules, nitrogenase activity, dry weight of shoot and root, nitrogen content, and uptake by shoot of the crop. It was concluded that BARI Mung-4 in association with Rhizobium strain TAL 169 performed best in recording nodulation, nitrogenase activity, dry matter production, and nitrogen uptake by shoot of mungbean.

• Food Science of Animal Resources
• /
• v.39 no.3
• /
• pp.379-387
• /
• 2019

The effects of dry-aging on changes in taste compounds and electronic taste sensing traits of pork were investigated. Ten pork belly and shoulder blade cuts were divided into wet-aging and dry-aging treatments and stored for 21 days at $2^{\circ}C$. The contents of nucleotides and free amino acids, and electronic tongue analysis were investigated at different aging periods (1, 7, 14, and 21 days). The contents of inosine and hypoxanthine of dry-aged pork cuts increased more rapidly, and they were significantly (p<0.05) higher than wet-aged pork cuts. Total free amino acids of dry-aged pork cuts were also significantly (p<0.05) higher than those of wet-aged pork cuts after 21 days of aging. Consequently, umami intensity of dry-aged pork cuts increased more rapidly and the values were significantly (p<0.05) higher than those of wet-aged pork during 21 days of aging. Results suggested that the better palatability of dry-aged pork cuts might be due to higher umami intensity in relation to higher contents of inosine, hypoxanthine, and free amino acids.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.5
• /
• pp.133-143
• /
• 2019

Various problems regarding the wet floor method such as its complicated process and waste of thermal storage have been raised, but the usage of dry floor recommended for long-life housing has declined due to lack of confidence on the performance of dry floor. The purpose of this study is to secure the credibility of dry floor. Under this purpose, this study considered precedent studies and established directions to secure the performance of long-life housing infill, and thus, 9 performance items (Impact sound, Smoothness, thermal comfort, sensation hardness while walking, falling safety, impact resistance, local compression load, local strength and strain at heating) were drawn. In addition, the experiment was carried out for 5 performances except for legal performance, some dry floor performances and whole spatial performance. As a result, an appropriate result from all performances except was obtained. The performance of dry floor was verified for each item from these results and it is expected to use such results as basic data on dry floor in the future.

• Geomechanics and Engineering
• /
• v.28 no.4
• /
• pp.375-384
• /
• 2022

The glacial tills and shales in Midwestern states of the USA often show strength degradation after construction. They are often in need of applying soil modification techniques to remediate their strength degradation with weathering process. This study investigated the weathering durability of these natural soils and biopolymer treated soils by comparing direct shear test results for wet-dry and wet-freeze-thaw-dry cycled specimens. The tests showed that untreated glacial tills maintained only 62% and 50% initial shear strength after eight wet-dry cycles and eight wet-freeze-thaw-dry cycles, respectively. These untreated soils could not withstand by themselves after 16 weathering cycles. The same soils treated with 1.5% (by dry weight) food-grade Xanthan gum maintained 140% and 88% initial shear strength of untreated soils after 16 weathering cycles for wet-dry cycles and wet-freeze-thaw-dry cycles, respectively. The same soils treated with 1.5% (by dry weight) Gellan gum maintained 82% and 60% initial shear strength of untreated ones after 16 weathering cycles, respectively. Similar results were obtained for crushed shales, manifesting that the biopolymerization method may be adopted as a new eco-friendly method to enhance the weathering durability of these problematic soils of glacial tills and shales.