• 한국가스학회지
• /
• 제25권1호
• /
• pp.7-13
• /
• 2021

재액화 드럼은 과냉각된 LNG를 증발가스에 직접 분사하기 위해 상부에 스프레이 노즐을 설치하고, 기액 분리가 용이하도록 데미스터를 설치한 제품으로, 소형 재액화 설비의 재액화 효율을 높이기 위해 개발한 제품이다. 드럼의 상온 내압기밀시험에서는 설계압력의 1.5배 이상의 압력에서도 누설(Leak)이 없었으나, 단열성능시험 중 온도변화에 따른 수축/팽창으로 인해 볼트풀림 현상이 발생하였다. 제품의 지속적인 사용을 위해 플랜지 결합부의 단열 시공은 탈부착이 가능하도록 개발하였으며, 기존 단열과의 열침입량 비교 결과 드럼 내 유입 유량 대비 매우 미미함을 확인하였다.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.67-72
• /
• 2011

HRSG (Heat Recovery Steam Generator) is a boiler to recover heat from the exhaust gas of an engine and to generate steam for more power generation or process. For the HRSG, water-tube type boiler is commonly adopted to accommodate the working pressure or capacity requirement of the system. The water-tube type boiler has a steam drum to separate steam from the water-steam mixture supplied from the evaporator tube (riser). The drum should be sized properly to separate the steam by the gravity and auxiliary internals, such as a demister, which are installed to filter the steam. To size the steam drum and to estimate the filter efficiency of drum internals, the velocity distribution inside the drum needs to be identified. In the present study, a series of CFD has been conducted to find the velocity distributions inside steam drums for conventional HRSGs and water-tube type industrial boilers. The velocity distributions obtained from the simulation have been normalized and a correlation to predict them has been found. The correlation is applied to the steam drum design by determining a proper position of a demister to show proper separation performance.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1889-1893
• /
• 2010

Differential pressure type level measuring systems have been using widely for industrial applications like drum level measurements in power plants. Because of difficulties in specific gravity compensation for vapor and liquid inside the vessel and the sensing lines, this type of measuring systems reveal significant measuring error. In this paper, the major reason causing errors on the differential pressure type level measurement is analyzed and a method of more accurate calculation for specific gravity compensation is introduced.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.487-493
• /
• 2020

최근 환경부의 강화된 규제로 건축물 아파트 등 산업시설을 도장함에 있어 페인트를 유압에 의해 자동으로 이송시켜 스프레이식으로 도장하는 기존 에어리스 방식의 사용을 금지하였다. 따라서 기존의 에어리스 도장장치에 스프레이 대신 부착하여 사용할 압송롤러개발이 필요한데, 현재 개발되어 판매 중인 압송롤러는 롤러를 구성하는 SUS배관 및 드럼베이스의 홀 설계에 대한 자세한 연구 사례가 없어 그 효율성이 의심이 되는 바이다. 특히, 롤러를 이용한 도장 시롤러 양단에 페인트가 충분히 공급되지 못하면 도장 후 붓을 이용한 재작업이 필요하게 되므로, 롤러 양단에 페인트가 잘 유입될 수 있도록 드럼베이스 홀을 분포시킬 필요가 있다. 본 연구에서는 SUS배관 및 드럼베이스에 가공되는 홀의 형태가 페인트의 유입양상에 미치는 영향을 알아보고 보다 효율적인 홀 설계 방안을 제시하기 위하여 SUS배관 및 롤러에 대하여 전산유체해석을 수행하였다. 해석결과 SUS배관에서의 홀 배치는 배관에 균일하게 배치하는 것이 균형 있게 페인트를 유입시키기에 좋고, 드럼베이스의 경우는 홀을 드럼베이스 양단에 밀집하여 가공하면 페인트가 롤러 양단에 더 잘 유입시킬 수 있음이 검증되었다.

• International Journal of Fluid Machinery and Systems
• /
• 제9권2호
• /
• pp.119-128
• /
• 2016

This work presents the numerical investigation of an unsteady cavitating flow around a balancing drum of a multistage pump. The main attention is focused on the cavitation phenomena, which occur in the rear part of the drum clearance, cause the erosion of the drum material and influence the pressure losses and the flow rate through the clearance. The one-way coupling of the URANS equations and the full Rayleigh-Plesset equation is employed to analyse the flow field as well as the dynamics of cavitating bubbles. The numerical simulations show that the erosion processes are highly influenced by shaft vibrations, namely by periodic deformations of the annular clearance in time. The calculated results are verified by erosion tests on a real pump.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.173-180
• /
• 2001

In the case of axisymmetric thermal analysis of drum brakes, the distribution of frictional heat produced on the interface and temperature difference between mating frictional faces are very interesting problems to computational researchers. In the first part, the influence of the s-cam load angles and elastic modulus of the pad on the contact pressure distribution between pad and drum was checked by a three dimensional model. In the second part heat conduction from the interface to the pad and the drum was modeled by using a thin interface element, so artificial division of the generated frictional heat between pad and drum is not necessary. Temperature difference between mating frictional faces is successfully modeled by using the interface element. The influence of some parameters on the thermal distribution is checked. The analysis was performed by ABAQUS/Standard code.

• Journal of Welding and Joining
• /
• 제30권6호
• /
• pp.10-14
• /
• 2012

Recently the low alloy steel plate made with manganese-molybdenum is used widely in steam drum and separator of the new coal-fired power plant boiler. This material is suitable for the vapor storage of high pressure and high temperature. The high temperature creep strength of Mn-Mo alloy is higher than the carbon plate(SA516) that used in the subcritical pressure boiler. It reduces the thickness of the pressure vessel and makes the lightweight possible. Recently in the power plant boiler operation and production process, the damage has happened frequently in the heat affected zone and base material according to the hydrogen crack and delayed crack. This paper describes the research result about the damage case experienced in the boiler steam drum production process and present the optimum manufacture method for the similar damage prevention of recurrence.

• Wind and Structures
• /
• 제25권5호
• /
• pp.433-457
• /
• 2017

As a novel typical wind-sensitive structure, the wind load and wind-induced structural behaviors of super-large straight-cone cooling towers are in an urgent need to be addressed and studied. A super large straight-cone steel cooling tower (189 m high, the highest in Asia) that is under construction in Shanxi Power Plant in China was taken as an example, for which four finite element models corresponding to four structural types: the main drum; main drum + stiffening rings; main drum + stiffening rings + auxiliary rings (auxiliary rings are hinged with the main drum and the ground respectively); and main drum + stiffening rings + auxiliary rings (auxiliary rings are fixed onto the main drum and the ground respectively), were established to compare and analyze the dynamic properties and force transferring paths of different models. After that, CFD method was used to conduct numerical simulation of flow field and mean wind load around the cooling tower. Through field measurements and wind tunnel tests at home and abroad, the reliability of using CFD method for numerical simulation was confirmed. On the basis of this, the surface flow and trail characteristics of the tower at different heights were derived and the wind pressure distribution curves for the internal and external surfaces at different heights of the tower were studied. Finally, based on the calculation results of wind-induced responses of the four models, the effects of stiffening rings, auxiliary rings, and different connecting modes on the dynamic properties and wind-induced responses of the tower structure were derived and analyzed; meanwhile, the effect mechanism of internal suction on such kind of cooling tower was discussed. The study results could provide references to the structure selection and wind resistance design of such type of steel cooling towers.

• 대한조선학회논문집
• /
• 제57권5호
• /
• pp.254-261
• /
• 2020

The structural safety of hydraulic winch drum and the gears are estimated by the Finite Element Analysis (FEA) and the winch operation experiment. The mesh convergence test is performed and the applied force is the pressure on the drum converted from the rope tension in working condition. The stress of the drum calculated from the strain values of the winch operation experiment shows the agreement with that from the FEA. Most stress values are under the yield strength except for the small hole made for the wire rope fixation. The life of bearings in the drum is calculated using the life prediction formula with the reaction forces from the operation load. One of the two ball bearings shows the short life for impact condition, yet the real prototype winch system shows more life than the numerical value.

• 수산해양기술연구
• /
• 제14권2호
• /
• pp.57-62
• /
• 1978

漁類의 食餌音, 游泳音 또는 低周波의 純音을 水中에 放音하여 漁類를 誘集하는데 成功하였다는 報告는 最近에 많이 發表되고 있다. 반대로 天敵이 내는 소리, 人工的으로 내는 소리의 剌戟으로 漁類의 驅集劾果을 내기 위한 연구는 희소하다. 末廣(1960)는 고기를 묵적한 장소에 쫓아 보내기 위해 대나무 장대로 水面을 두들겨서 고기를 그물속으로 쫓아 넣을 수 있다고 보고 했다. 또 寶際 韓國의 權現網漁業에서 2集의 網船이 曳網하여 曳網終期가 되면 날개부분에 있는 멸치는 자루쪽으로 후려넣기 위하여 漁艇에서 뱃삼, 드럼통, 꽹과리 등을 두들긴다. 저자는 본 실험에서 이것을 驅集劾果를 測定하여 보다 劾果的인 方法을 糾明하기 위하여 이들 소리의 音源에서 1m 떨어진 거리에서 指示騷音計로 音歷準位를 測定하면서 하고 그 錄音된 소리를 水中擴聲器를 통하여 無響水糟속의 멸치에게 放음했으며, 이들 소리가 명치를 驅集하는데 어느 정도 有效한가를 알기 위하여 멸치의 反應을 調査하였다.