• Journal of Satellite, Information and Communications
• /
• v.12 no.3
• /
• pp.22-34
• /
• 2017

The K-DRUM(K-water hydrologic & hydraulic Distributed RUnoff Model), a distributed rainfall-runoff model of K-water, calculates predicted runoff and water surface level of a dam using precipitation data. In order to obtain long-term hydrometeorological information, K-DRUM requires long-term weather forecast. In this study, we built a system providing long-term hydrometeorological information using predicted rainfall ensemble of GloSea5(Global Seasonal Forecast System version 5), which is the seasonal meteorological forecasting system of KMA introduced in 2014. This system produces K-DRUM input data by automatic pre-processing and bias-correcting GloSea5 data, then derives long-term inflow predictions via K-DRUM. Web-based UI was developed for users to monitor the hydrometeorological information such as rainfall, runoff, and water surface level of dams. Through this UI, users can also test various dam management scenarios by adjusting discharge amount for decision-making.

• Journal of Radiation Protection and Research
• /
• v.22 no.4
• /
• pp.309-317
• /
• 1997

The measured radioactivity of gamma-emitting radionuclides in each radioactive waste drum using the non-destructive waste assay method is underestimated than real radioactivity in radioactive waste drum because the gamma-rays are attenuated within the medium. Therefore, the measured radioactivity should be corrected for the attenuation of gamma-rays. For the correction of the attenuation of gamma-rays, the attenuation correction method should be applied differently by considering the distribution and density of medium in radioactive wastes drum generated from nuclear power plants. In this study, the model drums were fabricated for simulating five types of radioactive waste drums generated from nuclear power plant and the optimum methods of the attenuation correction were experimentally determined to analyze the activity of radionuclides in the waste drum accurately using the segmented gamma scanning system. With the determination of the attenuation correction methods from the experimental results the transmission method and the average density method for the miscellaneous waste drum, the transmission method and the differential peak absorption method for the shielded miscellaneous waste drum were used to measure the density of medium in waste drums. Also, the average density method and the differential peak absorption method for the spent resin drum, the paraffin solidified drum, and the spent filter drum were used.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.21-30
• /
• 2010

In this paper, the parallel distributed rainfall runoff model(K-DRUM) using MPI(Message Passing Interface) technique was developed to solve the problem of calculation time as it is one of the demerits of the distributed model for performing physical and complicated numerical calculations for large scale watersheds. The K-DRUM model which is based on GIS can simulate temporal and spatial distribution of surface flow and sub-surface flow during flood period, and input parameters of ASCII format as pre-process can be extracted using ArcView. The comparison studies were performed with various domain divisions in Namgang Dam watershed in case of typoon 'Ewiniar' at 2006. The numerical simulation using the cluster system was performed to check a parallelization effectiveness increasing the domain divisions from 1 to 25. As a result, the computer memory size reduced and the calculation time was decreased with increase of divided domains. And also, the tool was suggested in order to decreasing the discharge error on each domain connections. The result shows that the calculation and communication times in each domain have to repeats three times at each time steps in order to minimization of discharge error.

• Journal of the Korean Institute of Gas
• /
• v.25 no.3
• /
• pp.1-8
• /
• 2021

Among the flare systems that handle discharged substances from safety valves, the knockout drum was a key facility for safety, but the installation standards were not clear, so it was necessary to review the standards acceptable to the workplace and regulatory agencies. After investigating the domestic and foreign technical standards of knockout drums and the deficiencies of previous studies, research was first conducted on the degree of mass discharge, the installation location of the intermediate knockout drum, and the effect of changes in the composition of the discharged material. As a result of the study under the process simulation conditions, the gas-liquid separation of the knockout drum was completed in a small amount of less than 7,500kg/hr. However, when more than that was released, the gas-liquid separation effect was small even with the addition of an intermediate knockout drum. In addition, when the composition ratio of the material easily condensed was increased (molar fraction 10%), the gas-liquid separation effect of the knockout drum increased in the case of mass release. The gas-liquid separation effect was analyzed to be greater when the knockout drum was installed adjacent to the stack than the knockout drum was installed adjacent to the process equipment.

• The Korean Journal of Pain
• /
• v.34 no.2
• /
• pp.210-216
• /
• 2021

Background: Postherpetic neuralgia (PHN) is the most common complication of acute herpes zoster. The treatment of PHN remains a challenge for clinical pain management. Despite the effectiveness of anticonvulsants, antidepressants, and lidocaine patches in reducing PHN, many patients still face intractable pain disorders. In this randomized controlled study, we evaluated whether hydromorphone through intravenous patient-controlled analgesia (IV PCA) was effective in relieving PHN. Methods: Patients with PHN were randomly divided into two groups, one group received oral pregabalin with IV normal saline, another group received oral pregabalin with additional IV PCA hydromorphone for two weeks. Efficacy was evaluated at 1, 4, and 12 weeks after the end of the treatments. Results: Two hundred and one patients were followed up for 12 weeks. After treatment, numerical rating scale (NRS) score of patients in the hydromorphone group was significantly lower than that of the control group, and the difference of NRS scores between the two groups was statistically significant at 4 and 12 weeks after treatment. The frequency of breakthrough pain in the hydromorphone group was significantly lower than that in the control group 1 and 4 weeks after treatment. After treatment, the quality of sleep in the hydromorphone group was significantly improved compared with the control group. The most common adverse reactions in the hydromorphone group were dizziness and nausea, with no significant respiratory depression. Conclusions: IV PCA hydromorphone combined with oral pregabalin provides superior pain relief in patients with PHN, which is worthy of clinical application and promotion.

• Korean Journal of Food Science and Technology
• /
• v.18 no.5
• /
• pp.351-356
• /
• 1986

The effects of drum spacing, steam pressure and drum speed on drying rate of minced fish flesh on both single and double drum dryers were studied. Starch additions in the form of tapioca flour up to 2.5% have been found satisfactory for aiding in sheet formation at the doctor blade. When the retention time was adjusted to maintain a constant product moisture, the highest production rate was obtained at the smallest drum spacing and the highest steam pressure within the limits of experimental conditions considered. The operating conditions suitable for producing the flakes with 5% moisture were: 100 kPa (steam pressure), 0.1 mm (drum spacing) and 3 rpm (drum speed). The production rate and overall heat transfer coefficient under these conditions were $12.1\;kg/m^2$hr and 950 $W\;/m^2K$ respectively. The drying data were fitted well to the conventional drying model, namely $MR\;=\;A\;\exp\;(-k{\theta})$, resulting in the various drying constants depending the operating conditions.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.86-86
• /
• 2018

This study was conducted to investigate the effects of modified drum priming and 24-Epibrassinolide (24-EBL) treatment to improve the seed quality for export. 40, 50 and 60% seed moisture content (SMC) of hydrated seeds were incubated for 16 and 24 h in a container with a relative humidity of 99% at 26 rpm for a modified drum priming treatment. The treated seeds were sown at $20^{\circ}C$ and $30^{\circ}C$ (12/12h, light/dark) with four replications of 25 seeds on pleated paper. The seeds were hydrated with water or 24-EBL solutions of $10^{-7}$, $10^{-8}$ and $10^{-9}M$, respectively. The germination of the modified drum primed seeds (24 h incubation after 60% SMC hydration) improved to 1.6 days mean germination time (MGT) and $46%{\cdot}day^{-1}$ germination rate (GR), while the untreated seeds showed 2.1 days MGT and $28%{\cdot}day^{-1}$ GR. The modified drum priming (60% SMC and 24 h incubation with $10^{-9}M$ 24-EBL) showed improved results in MGT (1.8 days) and GR (55%) at $20^{\circ}C$, whereas untreated seeds showed 2.3 days MGT and 44% GR. Under $30^{\circ}C$, germination of modified drum primed seeds was significantly improved in GP (80%), GR ($31%{\cdot}day^{-1}$), HS (55%) and MGT (3.3 days), however, untreated seeds showed decreased GP (27%), GR ($22%{\cdot}day^{-1}$), HS (55%) and MGT (4.8 days). This study showed that the germination of lettuce seeds is enhanced by 24 h drum incubation with 24-EBL and this method can be used effectively to achieve the benefits of early germination and uniform seedling development. In addition, these treatments circumvent thermo-dormancy of lettuce seed and have a possibility of high-quality and environment-friendly seed processing.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.311-316
• /
• 2017

기후변화는 물 관리 측면에서 많은 변화를 일으키는 것으로 보고되고 있다. 주로 강우의 패턴을 변화시키며, 가용수자원의 지역적 편중을 심화시킨다. 기후변화에 적응하며 안정적이고 균등한 용수확보를 위해서는 홍수와 가뭄을 고려한 연속적인 물 순환 해석기술이 필요하다. 강우유출분석은 강우사상에 대한 수문순환과정을 통해 유출량을 산출하는 것으로, 주로 직접유출과 중간유출이 이에 해당된다. 강우발생 이후 무강우기간에 대해서는 기저시간 이후에 발생되는 유출량의 정량적 산출이 필요하다. 기저유출은 강우 발생 시점에 급격히 발생하기보다는 선행강우에 따른 유역 내 지하수위 분포와 대수층의 특성, 하천수위에 따라 다양한 패턴으로 나타나기 때문에 지하수대의 수리학적 성분들을 반영할 수 있어야 한다. 이를 위해서는 강우유출모의 시 지표유출량 산정과 지하수유동해석을 통한 기저유출량 산정이 동시에 이루어져야 한다. 최근 국내외에서는 다양한 형태의 수문모형과 MODFLOW를 연계한 장기유출분석에 대한 연구가 활발하게 진행되고 있다. 본 연구에서 활용한 K-DRUM(K-water Distribution Runoff Model)은 K-water에서 자체 개발한 물리적 기반의 분포형 강우유출모형으로 강우유출, 유사, 기초수질항목에 대한 3차원 분석이 가능하다. 본 모형의 A층(표층)은 지표유출을 고려한 운동파법이 적용되었고, B층과 C층(중간층), D층(지하수층)은 선형저류법이 적용되었다. MODFLOW(A Modular Three-Dimensional Finite-Difference Ground Water Flow Model)는 1980년대 USGS(United State Geolog ical Survey)에서 개발된 가장 범용적으로 사용되는 지하수유동모형이며, 모듈화 된 구조를 갖고 있어 다양한 패키지 중 필요로 하는 기능을 독립적으로 모의할 수 있는 장점이 있다. 본 연구에서는 향후 기후변화에 따른 강우의 불확실성에 대비한 유역의 장기 물순환 해석을 위해 강우유출모형인 K-DRUM과 지하수유동모형인 MODFLOW를 연계하고자한다. 연계방법은 K-DRUM에서 계산된 D층으로 침루되는 양을 MODFLOW의 함양량으로 적용하고, MODFLOW에서 산출된 기저유량을 K-DRUM의 하천유출에 적용하는 것이다. 본 연구의 성과를 갈수기 유출해석에 적용하면 정확성을 크게 향상시킬 수 있을 것으로 판단된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1311-1314
• /
• 2005

Recently drum washing machines are required to improve not only functions, but also endurance security. The spider is one of the major parts in a drum washing machine as a power transmission device. It is needed estimating for fatigue life because it rotates at high velocity when the drum washing machine works. In this study, we tried to estimate fatigue life of the Spider with CAE and verified the accuracy by comparing the CAE results with the experimental results. The estimation method of fatigue life for the spider with CAE will be applied to raise the efficiency of time and money in the design process of a new drum washing machine.

• Tribology and Lubricants
• /
• v.23 no.3
• /
• pp.103-108
• /
• 2007

In this paper, the optimized design and strength analysis have been presented based on the finite element and Taguchi's experimental methods. The stress, strain and displacement characteristics of OPC drum tubes are affected by rolling contact pressures between an OPC drum tube and a paper, design parameters of an aluminum tube and material properties. The OPC drum tubes with nine different geometrical models are analyzed for design parameters that are related to the outer diameter, the thickness, and the length of an aluminum tube for a toner cartridge. The optimized design parameters for an aluminum tube may be selected as the outer diameter of 28 mm, the thickness of 0.8 mm, and the length of 220 mm. But the currently used aluminum tube for a laser printer is fairly optimized based on the Taguchi's design analysis. The calculated FEM results showed that the affection ratio of the design parameter t, which may control the strength of an aluminum tube, is the most influential parameter among the length and an outer diameter of a tube.