• Archives of Pharmacal Research
• /
• 제28권8호
• /
• pp.977-982
• /
• 2005

The aim of this study was to compare two formulations of film-coated pellets containing c1arithromycin after single oral dose study in healthy male volunteers. Two formulations with different coating polymers were prepared: formulation-1 (F-1) was prepared by incorporating three kinds of pH-dependent gradient-release coated pellets into capsules and formulation-2 (F-2) was prepared by coated with an insoluble semiosmotic film. Release profiles of filmcoated pellets were evaluated using paddle method under different conditions. Pharmacokinetic profiles of these formulations were obtained in three healthy male volunteers and compared to commercially available immediate release (IR) tablets. The relative bioavailability based on the $AUC_{0-24h}$ was found to be $96.2\%\;and\;58.7\%$ for F-1 and F-2 compared with IR, and the $T_{max}$ was delayed.

• 분석과학
• /
• 제36권6호
• /
• pp.281-290
• /
• 2023

Zidovudine is an antiretroviral agent prescribed for the prevention and treatment of human immunodeficiency virus/acquired immune deficiency syndrome (HIV/AIDS). It is typically recommended to be used in combination with other antiretroviral drugs. Zidovudine has the potential to generate N-nitrosodimethylamine (NDMA) in the presence of dimethylamine and nitrite salt under acidic reaction conditions during the drug manufacturing process. NDMA is a potent human carcinogen that may be detected in drug substances or drug products. An analytical method was developed to determine NDMA in pharmaceuticals including zidovudine using high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The analysis involved reversed-phase chromatography on a Kinetex F5 column with a mobile phase comprising water-acetonitrile mixtures. The detection of positively charged ions was conducted using atmospheric pressure chemical ionization (APCI). The calibration curve demonstrated excellent linearity (r = 0.9997) across the range of 1-50 ng/mL with a highly sensitive limit of detection (LOD) at 0.3 ng/mL. The developed method underwent thorough validation for specificity, linearity, accuracy, precision, robustness, and system suitability. This sensitive and specific analytical method was applied for detecting NDMA in zidovudine drug substance and its formulation currently available in the market, indicating its suitability for drug quality management purposes.

• Journal of Pharmaceutical Investigation
• /
• 제41권1호
• /
• pp.51-57
• /
• 2011

The objective of this study was to enhance the utilitization of Ibuprofen (IBU) by introducing the fast-disintegrating tablet (FDT) form. Presently, IBU is being widely used as a tablet or syrup form. But in contrast to these two formulations, IBU as FDT is not only convenient but also increases the control over the time release of the drug, noted by using Alginate beads. This study was carried out with Sodium Alginate and IBU at the ratios of 1:0, 1:0.5, 1:1, and 1:2 in order to produce a series of beads with different ratios. During the drying process of the beads, talc was added in beads to compare the effects with and without the talc. The final product was scanned with SEM imaging to determine the difference in the surface of the beads. The parameters assessed were the diameter, content assay, dissolution test and effectiveness of time-release. Direct compression method was used to prepare FDT containing IBU bead. The properties of FDT, such as hardness, disintegration time, were investigated. The dissolution profiles of FDT were tested using KP dissolution apparatus 1 (basket method). The results suggest addition of talc and drying the beads made the surface smooth and less vulnerable to clutter into chunks. The size of beads was less than 300 ${\mu}m$ which did not create a sandy feeling in the mouth. Thus, the beads formulation model made the sustained release of the drug possible, the hardness of FDT (1.25~1.50 $Kg/cm^2$) was acceptable and all the values of dissolving period were less than 30 seconds. The dissolution profile of FDT was same as that of IBU bead. The efficient dissolution profile and low price of IBU bead containing Sodium Alginate, the FDT formulation prepared from IBU bead can save the expenses and can improve the convenience of application of this drug.

• 셀메드
• /
• 제13권14호
• /
• pp.18.1-18.13
• /
• 2023

Background and objectives: Bacterial vaginosis (BV) is recognized as the most prevalent type of vaginal infection, impacting approximately 19-24% of women in their reproductive years. The recurrence rate of BV is significant, negatively impacting the well-being of affected women. This study aimed to compare the therapeutic effects of a polyherbal Unani formulation and metronidazole in treating bacterial vaginosis. Methodology: In this prospective patient blinded standard controlled trial, a total of 40 individuals with a clinical diagnosis of bacterial vaginosis were randomly assigned to receive either an active control treatment (n = 20) or a test drug (n = 20). In the test drug combination of Acacia catechu, Azadirachta indica and Quercus infectoria in tablet (1g) form in the dose of 2 tablets orally twice daily with water was administered for 3 weeks. In the active control standard drug, metronidazole 400 mg tablet, orally twice daily was given for one week. The primary outcome measure was clinical cure; H. negative Amsel's criteria and a reduction in subjective symptoms, while the secondary outcome measure was an improvement in SF-36 quality of life (QOL). Results and conclusion: Both the experimental treatment and the metronidazole demonstrated a significant clinical cure for bacterial vaginosis as well as an increase in health-related quality of life. Based on these findings, it appears that the test medication is a potent Unani formulation for the treatment of bacterial vaginosis. A well conducted trial with a bigger sample size is required to corroborate these findings.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.103-109
• /
• 2011

The objective of the study was to prepare self-microeulsifying drug delivery system (SMEDDS) incorporating atorvastatin calcium and evaluate its properties and oral bioavailability. Solubility of atorvastatin in various vehicles was determined. Pseudo-ternary phase diagrams were constructed to identify the good self-emulsification region. The droplet size distributions of the resultant emulsions were determined by dynamic light scattering measurement. The mean droplet size of chosen formulation (20% ethyl oleate, 40% tween-80, 40% Carbitol$^{(R)}$) was $23.4{\pm}1.3$ nm. The SMEDDS incorporating atorvastatin calcium appeared to be associated with better performance in dissolution and pharmacokinetic studies, compared with raw atorvastatin calcium. In dissolution test, the release percentage of atorvastatin from SMEDDS mixture could rapidly reach more than 95% within 3 min. Oral $AUC_{0{\rightarrow}8hr}$ values in SD rats was $1994{\pm}335\;ng{\cdot}hr/mL$, which significantly increased (P<0.05) compared with raw atorvastatin calcium. The SMEDDS formulation was relatively stable when stored at $4^{\circ}C$ during 3 months. Our studies illustrated the potential use of SMEDDS for the delivery of hydrophobic compounds, such as atorvastatin, by the oral route.

• Journal of Pharmaceutical Investigation
• /
• 제40권5호
• /
• pp.305-311
• /
• 2010

The present study was aimed at preparing microemulsion-based hydrogel (MBH) for the skin delivery of itraconazole. Microemulsion prepared with Transcutol as a surfactant, benzyl alcohol as an oil and the mixture of ethanol and phasphatidyl choline (3:2) as a cosurfactant were characterized by solubility, phase diagram, particle size. MBHs were prepared using 0.7 % of xanthan gum (F1-1) or carbopol 940 (F1-2) as gelling agents and characterized by viscosity studies. The in vitro permeation data obtained by using the Franz diffusion cells and hairless mouse skin showed that the optimized microemulsion (F1) consisting of itraconazole (1% w/w), benzyl alcohol (10% w/w), Transcutol (10% w/w) and the mixture of ethanol and phospahtidylcholine (3:2) (10% w/w) and water (49% w/w) showed significant difference in the flux (${\sim}1{\mu}g/cm^2/h$) with their corresponding MBHs (0.25-0.64 ${\mu}g/cm^2/h$). However, the in vitro skin drug content showed no significant difference between F1 and F1-1, while F1-2 showed significantly low skin drug content. The effect of the amount of drug loading (0.02, 1 and 1.5% w/w) on the optimized MBH (F1-2) showed that the permeation and skin drug content increased with higher drug loading (1.5%). The in vivo study of the optimized MBH (F1-2 with1.5% w/w drug loading) showed that this formulation could be used as a potential topical formulation for itraconazole.

• Journal of Pharmaceutical Investigation
• /
• 제34권1호
• /
• pp.57-71
• /
• 2004

The objective of this study was to provide a better understanding of SUPAC-IR and its application in handling postapproval changes to immediate release solid oral dosage forms. Originally, SUPAC-IR was aimed at reducing the regulator burdern of the industry when they were making postapproval changes, but still at maintaining the formulation quality and performance of a drug product. The postapproval changes that were covered under SUPAC-IR included variations in the components ad composition of formulation, the site of manufacturing, batch size, manufacturing equipment, and manufacturing process. The guidance defined levels of changes, based on the likelihood of risk ocurrence and potential impact of postapproval changes upon the safety and efficacy of a drug product I suggested what a type of fing report should be submitted to the FDA for each level of change. Chemist, manufacturing, and control tests to be executed were also recommended for each change level The important tests specified in the guidance included batch release, stability, in vitro dissolution, and in vivo bioequivalence tests. However, there have been strong demands on revising the current SUPAC-IR in order to resolve some issues and to improve its usefulness in evaluating postapproval changes to immediate release solid oral dosage forms. In particular, the rigorous requirement of case C dissolution test and the definition of batch size were challenged by both academia and the industry. A revision work was in progress to reflect these inputs and to expand the utility of SUPAC-IR. As a result of these concerted efforts, an updated 2nd version of SPAC-IR would be likely to be issued ver soon to the public.

• Communications for Statistical Applications and Methods
• /
• 제8권2호
• /
• pp.443-452
• /
• 2001

The 2x3 cross-over design is proposed for the bioequivalence of two test drug formulations with a reference drug formulation. Oh et al.(1999) and Park et al.(1998) derived 3x2 cross-over design and discussed its benefits, since the 3x3 cross-over design may not be of practical design. We discuss the statistical issues for2x3 cross-over design and show its statistical properties. Bioequivalence problem in 2x3 cross-over design is considered statistically and an illustrated example is given.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2-1
• /
• pp.56-56
• /
• 2003

Carduus marianus extract (formally called silymarin) have been used mainly as a medicament for hepatobiliary diseases. The major component of silymarin is silybin, which constitutes between 50 and 70% of the drug and is the major active component. Many experiments show the efficacy of silybin parenterally administerated. But, its bioavailability is low after oral administration due to its low solubility in water. (omitted)

• 한국생물물리학회:학술대회논문집
• /
• 한국생물물리학회 1997년도 학술발표회
• /
• pp.21-21
• /
• 1997

Transport of drug entrapped in a liposome-hydrogel formulation was significantly retarded in an in vitro topical application. Liposomes containing hydrocortisone acetate, a hydrophobic antiinflammatory agent, were prepared by the precipitation method, and the liposomal suspension was mixed with hydrogel into a semisolid gel-type ointment.(omitted)