• Journal of Microbiology and Biotechnology
• /
• 제9권1호
• /
• pp.50-55
• /
• 1999

To develop a new form of controlled release dosage for administering for indomethacin (IND), two formulations of IND-loaded nanoparticles were designed based on polysaccharide (guar) derivatives. Nanoparticles prepared by the dialysis method were characterized with respect to morphology, size distribution, drug content, and in vitro drug release. Morphological studies by scanning electron microscopy (SEM) indicated that guar acetate (GA) nanoparticles were spherical in shape and had a smooth surface. The particle size distributions of formulation I (40mg of GA) and formulation II (80mg of GA) were shown to be $250.78\pm185.13nm$ and $718\pm145.90nm$ in distilled water ($20$^{\circ}C$), respectively. The drug loading efficiencies of nanoparticles were approximately 26% and 31% for formulations I and II, respectively. The differential scanning calorimetry (DSC) results indicated that the IND was perfectly distributed within GA nanoparticles. We also found, from the X-ray diffractometry analysis, that a decrease in the degree of crystallinity of the drug occurred in the nanoparticles. No changes between the original IND and the released IND from GA nanoparticles were detected by FT-IR. Using guar acetate, it is possible to design nanoparticles which allow the controlled release of IND over an extended period of time.

• 한국환경과학회지
• /
• 제16권1호
• /
• pp.39-44
• /
• 2007

This study was conducted to investigate the contents of residual solvents and mineral components(11 kinds) in ginseng extracts with different extracting conditions(5 types) and commercial ginseng extract products(domestic, imported). Fine root was extracted with solution having various ethanol concentration after hexane treatment. Among 5 type extracts, residual solvent(hexane) was detected ginseng extracts treated ethanol mixed with hexane. But extracts that dried after soaked in hexane wasn't detected hexane. Mineral components(Al, Mn, Fe, Cu and Zn) were detected in fine root and 5 types of extracts. The contents of mineral components between fine root and extracts with various extracting conditions were similar, however, extracts that dried after soaked in hexane showed the lower amount in Al, Fe, Pb than the others. In comparison with commercial ginseng ex-tract products(domestic, imported), the distribution pattern of mineral was similar but the contents were a little different.

• 한국가시화정보학회지
• /
• 제10권2호
• /
• pp.32-38
• /
• 2012

In recent years a unique drug delivery system named as the transdermal drug delivery system has been developed which can deliver drug particles to the human skin without using any external needle. The solid drug particles are accelerated by means of high speed gas flow through a shock tube imparting enough momentum so that particles can penetrate through the outer layer of the skin. Different systems have been tried and tested in order to make it more convenient for clinical use. One of them is the contoured shock tube system (CST). The contoured shock tube consists of a classical shock tube connected with a correctly expanded supersonic nozzle. A set of bursting membrane are placed upstream of the nozzle section which retains the drug particle as well as initiates the gas flow (act as a diaphragm in a shock tube). The key feature of the CST system is it can deliver particles with a controllable velocity and spatial distribution. The flow dynamics of the contoured shock tube is analyzed numerically using computational fluid dynamics (CFD). To validate the numerical approach pressure histories in different sections on the CST are compared with the experimental results. The key features of the flow field have been studied and analyzed in details. To investigate the performance of the CST system flow behavior through the shock tube under different operating conditions are also observed.

• Genomics & Informatics
• /
• 제16권3호
• /
• pp.44-51
• /
• 2018

Fluoroquinolone (FQ) antibiotics are an important class of synthetic antibacterial agents. These are the most extensively used drugs for treating bacterial infections in the field of both human and veterinary medicine. Herein, the antibacterial and pharmacological properties of four fluoroquinolones: lomefloxacin, norfloxacin, ciprofloxacin, and ofloxacin have been studied. The objective of this study was to analyze the antibacterial characteristics of the different fluoroquinolones. Also, the pharmacological properties of the compounds including the Lipinski rule of five, absorption, distribution, metabolism, and excretion, LD50, drug likeliness, and toxicity were evaluated. We found that among all four FQ molecules, ofloxacin showed the highest antibacterial activity through in silico assays with a strong interaction (-38.52 kJ/mol) with the antibacterial target protein (topoisomerase-II DNA gyrase enzyme). The pharmacological and pharmacokinetic analysis also showed that the compounds ciprofloxacin, ofloxacin, lomefloxacin and norfloxacin have good pharmacological properties. Notably, ofloxacin was found to possess an IGC50 (concentration needed to inhibit 50% growth) value of $0.286{\mu}g/L$ against the Tetrahymena pyriformis protozoa. It also tested negative for the Ames toxicity test, showing its non-carcinogenic character.

• 약학회지
• /
• 제45권6호
• /
• pp.623-633
• /
• 2001

Various bupivacaine-loaded microspheres were prepared using poly(d,1-lactide) (PLA) and poly(d,1-lactic-co-glycolide) (PLGA) by a solvent evaporation method for the sustained release of drug. The effects of process conditions such as drug loading, polymer type and solvent type on the characteristics of microspheres were investigated. The prepared microspheres were characterized for their drug loading, size distribution, surface morphology and release kinetics. Drug loading efficiency and yield of PLGA micro- spheres were higher than those of PLA microspheres. The prepared microspheres had an average particle size below 5${\mu}{\textrm}{m}$. The particle size range of microspheres was 1.65~2.24${\mu}{\textrm}{m}$. As a result of SEM, the particle size of PLA microspheres was smaller than that of PLGA microspheres. In morphology studies, microspheres showed a spherical shape and smooth surface in all process conditions. In thermal analysis, bupivacaine-loaded microspheres showed no peaks originating from bupivacaine. This suggested that bupivacaine base was molecular-dispersed in the polymer matrix of microspheres. The release pattern of the drug from microspheres was evaluated for 96 hours. The initial burst release of bupivacaine base decreased with increasing the molecular weight of PLGA, and the drug from microspheres released slowly. In conclusion, bupivacaine-loaded microspheres were successfully prepared from poly(d,1-lactide) and poly (d,1- lactic-co-glycolide) polymers with different molecular weights allowing control of the release rate.

• Journal of Pharmaceutical Investigation
• /
• 제32권1호
• /
• pp.41-45
• /
• 2002

The purpose of this study is to microencapsulate a highly hygroscopic drug, pyridostigmine bromide (PB), with a waterproof wall material, in order to increase the flowability of the drug particles. Polyvinylacetaldiethylaminoacetate (AEA), Eugragit E and Eugragit RS were examined as the wall materials. Microcapsules containing PB were prepared by the evaporation technique in an acetone/liquid paraffin system using aluminum tristearate as a core material, and evaluated for drug encapsulation efficiency, surface morphology, particle size and drug dissolution. The encapsulation of PB in the wall material was almost complete. Among the wall materials examined, AEA exhibited the most excellency in shape, surface texture, flowability, size distribution of microcapsules. Above results suggest that AEA would be a potential wall material for microcapsulation of highly hygroscopic drugs, such as PB. Through microencapsulation with AEA, inconvenience of handling of PB powders encountered in the process of weighing and packing the powders to tableting die or capsule body could be greatly improved.

• Journal of Microbiology and Biotechnology
• /
• 제32권12호
• /
• pp.1605-1614
• /
• 2022

The strains associated with foodborne Salmonella enterica Thompson outbreaks in Korea have not been identified. Therefore, we characterized S. Thompson strains isolated from chocolate cakes linked to foodborne outbreaks in Korea. A total of 56 strains were isolated from preserved cake products, products in the supply chain distribution, the manufacturer's apparatus, and egg white liquid products used for cream preparation. Subsequently, serological typing, pathogenic gene-targeted polymerase chain reaction (PCR), pulsed-field gel electrophoresis (PFGE), and whole-genome multi-locus sequence typing (wgMLST) were performed to characterize these isolates. The antigen formula of all isolates was 7:k:1,5, namely Salmonella enterica subsp. enterica Serovar Thompson. All 56 isolates harbored invA, his, hin, and stn, and were negative for sefA and spvC based on gene-targeted PCR analyses. Based on PFGE results, these isolates were classified into one group based on the same SP6X01.011 pattern with 100% similarity. We selected 19 strains based on the region and sample type, which were subjected to wgMLST. Although the examined strains showed 100% similarity, they were classified into seven clusters based on allelic differences. According to our findings, the cause of these outbreaks was chocolate cake manufactured with egg white liquid contaminated with the same Salmonella Thompson. Additionally, comparative analysis of wgMLST on domestic isolates of S. Thompson from the three outbreaks showed genetic similarities of over 99.6%. Based on the results, the PFGE and wgMLST combination can provide highly resolved phylogeny and reliable evidence during Salmonella outbreak investigations.

• Archives of Pharmacal Research
• /
• 제27권5호
• /
• pp.562-569
• /
• 2004

Self-assembling nanospheres of hydrophobized pullulan have been developed. Pullulan acetate (PA), as hydrophobized pullulan, was synthesized by acetylation. Carboxymethylated poly(ethylene-glycol) (CMPEG) was introduced into pullulan acetate (PA) through a coupling reaction using N, N'-dicyclohexyl carbodiimide (DCC). A synthesized PA-PEG-PA (abbreviated as PEP) conjugate was confirmed by Fourier transform-infrared (FT-IR) spectroscopy. Since PEP conjugates have amphiphilic characteristics in aqueous solution, polymeric nanoparticles of PEP conjugates were prepared using a simple dialysis method in water. From the analysis of fluorescence excitation spectra primarily, the critical association concentration (CAC) of this conjugate was found to be 0.0063 g/L. Observations by scanning electron microscopy (SEM) showed the spherical morphologies of the PEP nanoparticles. The particle size distribution of the PEP conjugates was determined using photon correlation spectroscopy (PCS) and the intensity-average particle size was 193.3 ${\pm}$ 13.53 nm with a unimodal distribution. Clonazepam (CNZ), as a model drug, was easy to entrap into polymeric nanoparticles of the PEP conjugates. The drug release behavior was mainly diffusion controlled from the core portion.

• Archives of Pharmacal Research
• /
• 제13권3호
• /
• pp.227-232
• /
• 1990

A Physiologically based pharmacokinetic model was used to describe the distribition and elimination of cefriazone in the rat. To validate the practical application of the model, the effect of cffeine on the model was also examined. The model consisted of eleven compartments representing the major sites for ceftriaxone distribution including carcass which served as a residual compartment. Elimination was represented by renal and hepatic (metabolic biliary )excretion with GI secretion and re-absorption. The drug concentrations in most of the tissues were simulated using flow limited equations while brain levels were simulated using membrane limited passive diffusion distribution. The experimental data were obtained by averaging the concentration of drug in the plasma and tissues of five rats after i. v. injection of cefriazone 100 mg/kg without and with caffeine 20 mg/kg. The data for the amount of ceftriazone excreted in urine and gut contents were used to apportion total body clearance. HPLC with UV detection was used for the assay with 0.1-0.2 $\mu$g/ml sensitivity. The great majority of drug concentrations with and without caffeine show reasonably good agreements to the simulation results within 20%. The effect of caffeine on renal and hepatic clearances was apparent with 18.8% and 18.6% increase in the model values, respectively.

• Journal of Pharmaceutical Investigation
• /
• 제34권5호
• /
• pp.401-406
• /
• 2004

To develop an intravenous delivery system of all-trans retinoic acid (ATRA) for the cancer therapy, poly(L-lactic acid) nanoparticles were prepared and characterized. Emulsification-solvent evaporation method was chosen to prepare submicron sized nanoparticles. Spherical nanoparticles less than 200 nm in diameter with narrow size distribution were prepared, and the entrapment efficiency of drug was more than 95%. The endothermic peak at $183^{\circ}C$ and X-ray crystallographic peak of ATRA appeared in the nanoparticle system, suggesting the inhibition of crystallization of ATRA by polymer adsorption during the precipitation process. ATRA was released at $37^{\circ}C$ for 60 days and the release rate was dependent on the concentration of drug incorporated in the nanoparticles. While ATRA was unstable in the light, it was very stable at $4^{\circ}C$. These results suggest the usefulness of PLA nanoparticles as a sustained and prolonged release carrier for ATRA.