• 제목/요약/키워드: Drop analysis

검색결과 1,883건 처리시간 0.033초

75톤급 재생냉각 연소기 기술검증시제 연료 수류시험 및 차압 해석 (Fuel-Side Cold-Flow Test and Pressure Drop Analysis on Technology Demonstration Model of 75 ton-class Regeneratively-Cooled Combustion Chamber)

  • 안규복;김종규;임병직;김문기;강동혁;김성구;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.807-812
    • /
    • 2011
  • 한국형발사체 1단에 사용될 75톤급 액체로켓엔진 연소기의 기술검증시제를 설계, 제작하여 연료수류시험을 수행하였다. 가압압력을 조절하여 연료 유량을 변경함으로써 주어진 유량에서 발생하는 연소기 재생냉각 채널에서의 압력 손실을 측정하였다. 연소실 각 부에서의 압력 손실을 측정할 수 있었으며, 상당량의 압력 손실이 유속이 강한 연소실 노즐목부에서 발생함을 확인하였다. 주어진 연료 수류시험 조건에서 수력학 해석을 통하여 수력학 해석 방법의 정확도를 검증할 수 있었다.

  • PDF

플레이트형 지지구조체로 지지된 실린더형 관 군의 고주파 유동유발진동 및 압력손실에 대한 실험적 고찰 (Experimental investigation on the high frequency flow-induced vibration and pressure drop of cylindrical tube bundle with plate type supporting structures)

  • 이강희;김형규;윤경호;엄경보;김진선;서정민
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1367-1372
    • /
    • 2008
  • A plate type supporting structure of a tube bundle in axial flow generates a certain band of a high frequency periodic excitation of a vortex shedding and/or a flow separation due to sharp edge of the plate thickness and a severe pressure drop due to a cross-sectional area of the supports. With a design consideration of the low vibration and a small flow resistance, the analysis method is uniquely confined to an experimental approach because a complex geometry of a cylindrical tube bundle and/or physical phenomena related to the fluid-structure interaction of tube bundle in a flow impede a theoretical or a numerical approach. A 5x5 cylindrical tube bundle with 5 supports which were discretely located along the bundle's axis was tested in the FIVPET hydraulic test loop for a design evaluation and an analysis perspectives. A high frequency flow-induced vibration of the supporting structures of the cylindrical tube bundle was measured at a outer surface of a supporting structure through a transparent flow housing by the laser dopper vibrometer. Pressure drop in-between three measurement distances was measured by the differential pressure transmitter. High frequency vibration and pressure drop fairly depends on the geometric design of supporting structure. So, these two parameters would be used as a qualitative design variables for design evaluation and analysis.

  • PDF

75톤급 재생냉각 연소기 기술검증시제 연료 수류시험 및 차압 해석 (Fuel-Side Cold-Flow Test and Pressure Drop Analysis on Technology Demonstration Model of 75 ton-class Regeneratively-Cooled Combustion Chamber)

  • 안규복;김종규;임병직;김문기;강동혁;김성구;최환석
    • 한국추진공학회지
    • /
    • 제16권6호
    • /
    • pp.56-61
    • /
    • 2012
  • 한국형발사체 1단에 사용될 75톤급 액체로켓엔진 연소기의 기술검증시제를 설계, 제작하여 연료 수류시험을 수행하였다. 가압압력을 조절하여 연료 유량을 변경함으로써 주어진 유량에서 발생하는 연소기 재생냉각 채널에서의 압력 손실을 측정하였다. 연소실 각 부에서의 압력 손실을 측정할 수 있었으며, 상당량의 압력 손실이 유속이 강한 연소실 노즐목부에서 발생함을 확인하였다. 주어진 연료 수류시험 조건에서 수력학 해석을 통하여 수력학 해석 방법의 정확도를 검증할 수 있었다.

변형된 PRMA의 성능분석 (Performance Analysis of Modified PRMA: PRHMA(Packet Reservation Hold Multiple Access))

  • 김환의;김덕년
    • 융합신호처리학회 학술대회논문집
    • /
    • 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
    • /
    • pp.73-76
    • /
    • 2000
  • 본 논문에서는 다중접속 프로토콜인 PRMA의 변형된 모델에 대해서 다뤘다. 기존의 PRMA에서는 초기 엑세스시 얻은 슬롯을 휴지기에 잃게 되므로 매 활성기마다 다시 슬롯을 엑세스함으로써 추가적인 패킷의 drop이 발생하는 반면, 변형된 모델에서는 슬롯예약을 유지하기 위한 제어미니슬롯을 사용함으로써 초기 엑세스 이후의 추가적인 패킷 drop이 발생하지 않는다.

  • PDF

Quality of Same-Day Sputum Smears Microscopy and Presumptive Tuberculosis Patients Drop-out at Health Facilities of Addis Ababa, Ethiopia

  • Taddese, Boja Dufera;Misganaw, Abay Sisay
    • Tuberculosis and Respiratory Diseases
    • /
    • 제83권1호
    • /
    • pp.89-95
    • /
    • 2020
  • Background: Same-day sputum microcopy is recommended in areas where sputum smear microscopy external quality assessment (EQA) is effectively implemented and sturdy. In Addis Ababa, the status of EQA and drop-out of same-day sputum smear microcopy has not yet been assessed. The objective of this study was to assess the quality of same-day sputum smear microscopy and diagnostic drop-out of presumptive tuberculosis (TB) patients in health facilities (HFs) across Addis Ababa, Ethiopia. Methods: Amulti-analysis was conducted from September 2016 to July 2017 to determine the status of external quality assessment and diagnostic drop-out of presumptive TB patients registered for same-day sputum smear microscopy. Data was coded and entered in Microsoft Excel, and subsequently transferred and analyzed using SPSS version 20.0. Results: The drop-out of same-day sputum smear microscopy was 209 (6.2%). More than 33% of the specimens collected for purposes of same-day sputum smears were of poor quality. Among the selected HFs for the study: 13 (46.4%) used filter reagents prior to sputum smear staining while 75% of the selected HFs for the study used smear microscopy services interruption in a year. The sensitivity and specificity of the HFs participating in regional quality assessment scheme for the diagnosis of TB was 97.4% and 99.6%, respectively. Conclusion: The diagnostic drop-out of same-day sputum smear microscopy was high in Addis Ababa. Strengthening EQA, competency-based laboratory professionals training on sputum smear microscopy might reduce the reading errors in sputum smear. Awareness creation of the community on the benefits gained from completion of specimen provision for the same-day approach decreases diagnostic drop-out and enhances TB control program.

드롭랜딩 시 착지 방향에 따른 발목과 무릎 상해 기전 분석 (Analysis of Injury Mechanism on Ankle and Knee during Drop Landings According to Landing Directions)

  • 조준행;김경훈;문곤성;조영재;이성철
    • 한국운동역학회지
    • /
    • 제20권1호
    • /
    • pp.67-73
    • /
    • 2010
  • The purpose of this study was to compare the differences in kinematic and kinetic parameters of the ankle and knee joint according to three landing direction(central, left, right). Fifteen collegiate male athletes(age: $22.7{\pm}3.5$ years, height: $174.9{\pm}7.1\;cm$, weight: $69.4{\pm}6.7\;kg$) with the right leg as dominant were chosen. The subjects performed series of drop landings in three directions. In terms of the three different landing directions, plantar flexion was the greatest during the central drop landings. For each initial contact of the landing direction, plantar flexion of the ankle was greatest at the central drop landing, inversion of the ankle was greatest at the right landing and valgus of the knee was greatest at the left drop landing. Regarding the peak force, the greatest was at the 1st peak force during the central drop landing. For the time-span of the 2nd peak force and the 2-1 peak force, both right sides resulted as the greatest. Therefore, with the appropriate training in landing techniques and developing neuromuscular training for proprioception by taking the injury mechanisms on ankle and knee during drop landings into account, it will assist in preventing such injuries.

변압기 기반 3상 전압변동발생기의 전압강하 특성해석 (Analysis of Voltage Drop Characteristics of Transformer-based 3-phase Voltage Disturbance Generator)

  • 한흥수;이영호;송웅협;노의철;김인동;김흥근;전태원
    • 전력전자학회논문지
    • /
    • 제15권5호
    • /
    • pp.411-416
    • /
    • 2010
  • 본 논문에서는 변압기 기반 전압변동 발생기의 직렬변압기에 의한 전압강하 특성을 분석하였다. 전압변동 발생기의 회로구성 방식에는 여러 가지가 있으나 본 논문에서는 비교적 비용이 저렴하고 신뢰도가 높은 직렬변압기를 사용한 방식에 대해 다루고자 한다. 직렬변압기에 의한 전압강하는 변압기의 %Z와 부하용량 및 부하역률에 의해 결정된다. 직렬변압기의 설계가 잘못되면 전압강하가 심각하게 발생하여 제대로 된 성능을 확보할 수 없다. 본 논문에서는 10kVA급 전압변동 발생기에 대해 %Z가 4%인 직렬변압기를 사용한 경우 부하역률에 따른 전압강하를 분석하였으며 지상 부하일수록 전압강하가 증가하고 역률이 0.85 지상인 경우 전압강하가 4% 발생함을 시뮬레이션 및 실험을 통하여 확인하였다.

디지털 통신 응용을 위한 $MnO_2$, Pseudo-capacitor의 시스템 설계 및 성능평가 (System Design and Performance Analysis of $MnO_2$ Pseudo-capacitor for Digital Communication Applications)

  • 성우경;홍명신;김선욱
    • 전기화학회지
    • /
    • 제3권4호
    • /
    • pp.241-245
    • /
    • 2000
  • 비정질 $MnO_2\;nH_2O$ 전극재료를 사용한 pseudo-capacitor를 설계 제작하여 특성을 평가하였다. 100mV/s의 cyclic voltammogram으로부터 측정한 결과, 이 전극재료의 안정한 potential window는 1V이고 비용량은 250F/g이었다. TDMA(Time Division Multiplex Algorithm) pulse 시험에서 TDMA 시스템 (2 parallel-pseudo-capacitor systems) 은 0.22V의 ohmic voltage drop과 0.38V의 capacitor voltage drop을 보여주었다. 이 TDMA system의 total voltage drop이 0.60V이므로 TDMA 위성통신 휴대전화의 요건인 1V maximum voltage drop을 충족하였다. 또한, 이 system의 ESR과 비용량은 각각 $55m{\Omega}$과 105mF이었다. 따라서 이 TDMA system이 위성통신 휴대전화를 위한 load-leveling 캐패시터로 응용 가능함을 확인하였다.

드롭 착지와 착지 후 점프 시 충격흡수 기전의 차이 분석 (Analysis of the Differences of the Shock Absorption Strategy between Drop-Landing and Countermovement-Jump)

  • 조준행;김경훈;고영철
    • 한국운동역학회지
    • /
    • 제22권4호
    • /
    • pp.379-386
    • /
    • 2012
  • The aim of this study was to investigate and identify the differences in lower extremity energy dissipation strategies between drop-landing and countermovement-jump maneuvers. Fourteen recreational athletes(Age : $23.3{\pm}2.1years$, Height : $172.3{\pm}4.0cm$, Weight : $69.2{\pm}4.7kg$) were recruited and instructed to perform drop-landing from 45 cm height and countermovement-jump from 45 cm to 20 cm height. The landing phase was taken as the time between initial contact and peak knee flexion. A motion-capture system consisting of eight infra-red cameras was employed to collect kinematics data at a sampling rate of 200 Hz and a force-plate was used to collect GRF data at a sampling rate of 2000 Hz. Paired t-test was performed to determine the difference in kinematics and kinetics variables between each task. During the countermovement-jump task, all of lower extremity joint ROM and the hip joint eccentric moment were decreased and the ankle joint plantarflexion moment was increased than drop-landing task. In the eccentric work during countermovement-jump task, the ankle joint displayed greater while knee and hip joint showed lesser than drop-landing. Therefore, the knee joint acted as the key energy dissipater during drop-landing while the ankle joint contributed the most energy dissipation during countermovement-jump. Our findings collectively indicated that different energy dissipation strategies were adopted for drop-landing and countermovement-jump.