• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2008년도 추계학술대회
• /
• pp.561-567
• /
• 2008

The objectives of this study is to: (1) develop how applications for driving simulator of national highway safety designs when those are appeared; (2) examine the degree to which those geometric designs of the horizontal and vertical profile; and (3) search positive safety and passive highway safety design of the point at which highway alignment factors initiate driving safety to facility or highway design.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.228-230
• /
• 2009

Lane extraction is basically required for a driving car to understand its external road environments via a camera. In this paper, a lane extraction method using "Sobel Intensity Profile" is described. The Sobel intensity profile is obtained using only vertical edge components of Sobel edge outputs, and used to yield fitted lines for lanes. The RANAC algorithm is applied to fit lines using only inliers. Experimental results have shown the reliability of the proposed lane extraction method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.355-358
• /
• 1996

Electrical Power System (EPS) of Electric Vehicle which consists of batteries, motor and driving subsystem, has been modeled. A battery model is modeled with an electrical circuit representing a characteristics of real battery. Driving subsystem is modeled as three different level namely exact, average and functional models. Load profile includes road information, speed profile and EV mechanical parameters, which are incorporated into a reference torque in the driving subsystem model. A system model is integrated to simulate the performance of electric vehicle such as energy balance, battery status, and electrical stress of each subsystem.

• 소음진동
• /
• 제5권2호
• /
• pp.257-264
• /
• 1995

We designed the cutter profile for symmetric screw rotor and did vibration experiment of screw rotor manufactured by the designed cutter profile. The results of this study are summarized as follows. (1) We designed the cutter profile of screw rotor (4-6)(5-6) by using numerical analysis program. (2) The maximum amplitude and variation of amplitude of 5-6 profile rotor are about 30 - 36.7% and 10 - 25% smaller than those of 4-6 profile rotor, respectively. (3) As the angular velocity of rotor changes from 100 to 300 rpm, the vibration of X, Y axis in driving shaft of 5-6 profile rotor is about 10 - 20% smaller than that of 4-6 profile rotor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.247-250
• /
• 2003

The current paper presents the design and implementation of a low-profile dc-to-dc converter developed as a power supply for the sustain driving: circuit inside large-area wall-mount ac PDP application systems. Details on the design and implementation of a 500 W prototype dc-to-dc converter, miniaturized within a 230 mm$\times$ 130 mm area with a thickness of 25 mm while still achieving a 95 $\%$ conversion efficiency, are presented to demonstrate the feasibility and application potentials of the proposed low-profile dc -to-dc converters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.333-336
• /
• 2003

The current paper presents the design and implementation of a low-profile dc-to-dc converter developed as a power supply for the sustain driving circuit inside large-area wall-mount ac PDP application systems. Details on the design and implementation of a 500 W prototype dc-to-dc converter, miniaturized within a 230 $mm{\times}130$ mm area with a thickness of 25 mm while still achieving a 95 % conversion efficiency, are presented to demonstrate the feasibility and application potentials of the proposed low-profile dc-to-dc converter.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.774-780
• /
• 2017

The techniques for driving trajectory calculation and driving trajectory distribution calculation are proposed to analyze the durability of ground vehicles effectively. To achieve this aim, the driving trajectory of a vehicle and the driving trajectory distribution of that are needed, in addition to road profile. The road profiles can be measured by a profilometer but a driving trajectory of a vehicle cannot be acquired effectively due to a large position error from a conventional GPS sensor. Therefore two techniques are proposed to reduce the position error of a vehicle and achieve the distribution of driving trajectory of that. The driving trajectory calculation technique produces relative positions by using the velocity, time and heading of a vehicle. The driving trajectory distribution calculation technique produces distributions of the driving trajectory by using axis transformation, estimating reference line, dividing sectors and plotting a histogram of the sectors. As a results of this study, we can achieve the considerably accurate driving trajectory and driving trajectory distribution of a vehicle.

• 한국자동차공학회논문집
• /
• 제5권1호
• /
• pp.69-78
• /
• 1997

Main sources of the vibration in gear driving system are transmission error and backlash. Transmission error is the difference of the rotation between driving and driven gear due to tooth deformation and profile error. Vibro-impacts induced by backlash between meshing gears lead to excessive vibration and noise in many geared rotation systems. Nonlinear dynamic characteristics of the gear driving system due to transmi- ssion error and backlash are investigated. Transmission error is calculated for spur gear. Nonlinear equation of motion for the gear driving system is developed with the calculated transmission error and backlash. Numerical analysis of the equation and the experimental results show the existence of meshing frequency, superharmonic compon- ents. Instability of the gear driving motion is found on the basis of Mathieu equation. Rattle vibration due to backlash is also discussed on the basis if nonlinear jump phenomenon.

• Safety and Health at Work
• /
• 제13권2호
• /
• pp.148-154
• /
• 2022

Background: Bus driving is a mentally demanding activity that requires prolonged attention to ensure safety. The aim of the study was to assess mental fatigue caused by driving a public bus and to find a profile of workers at higher risk. Methods: We evaluated changes of critical flicker fusion (CFF) (index of central arousal) and heart rate variability (HRV) (index of autonomic balance) in a 6-hour driving shift on a real route, in 31 professional bus drivers, and we tested the influence of personal factors such as sleep quality, BMI, and age. Paired t-test was used to test differences of CFF and HRV between both initial and final phase of driving, while multiple linear regression tested the influence of personal variables on the indexes of mental fatigue. Results: Results showed that CFF significantly decreased after 6 hours of bus driving (41.91 Hz, sd 3.31 vs. 41.15 Hz, sd 3.15; p = 0.041), and heart rate significantly decreased in the final phase of driving, with respect to the initial phase (85 vs. 78 bpm, p = 0.027). Increasing age (beta = -0.729, p = 0.022), risk of obstructive sleep apnea syndrome (beta = -0.530, p = 0.04), and diurnal sleepiness (beta = -0.406, p = 0.017) showed a significant effect on influencing mental fatigue. Conclusion: Elderly drivers at higher risk of sleep disorders are more prone to mental fatigue, when exposed to driving activity. Monitoring indexes of central arousal and autonomic balance, coupled with the use of structured questionnaires can represent a useful strategy to detect profile of workers at higher risk of mental fatigue in such duty.

• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.788-795
• /
• 1996

In this paper, and optimum profile of a cam being used in a VTR Deck mechanism is designed by the response surface analysis. The objective function of the design is to reduce driving torque of the pinch roller system that is used to compress video tape to the capstan motor axia. The pinch roller system that will be designed is modeled using the general purpopse mechanism analysis program DADS. The computer model is compared with the physical system for reliability. A model function to represent relationship between design variables and the objective function is estimated by the response surface analysis. Once the model function is reliably estimated the optimal design is carried out using the model function and each design variable's boundaries. To verify improvement of the pinch roller system, a prototype for the pinch rooler system is made and tested. From the test result, an optimum cam profile to resuce driving torque of the pinch roller system is verified.