• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.383-390
• /
• 2005

This study proposes an innovative design guideline to assist the evaluation and improvement of the dynamic comfort of vehicle seating. The existing evaluation method for the comfort of vehicle seating was investigated to broach problems in evaluation. It was found that the currently existing evaluation method employs the resonance frequency of the vibration system composed of the seat and the human body and the maximum vibration transmissibility. This study proposes a design guideline aimed at the enhancement of vibration transmission characteristics above the resonance range, particularly within the range of 10-18 Hz. In order to meet this guideline, a seat was constructed out of foam having a low damping coefficient. It was then installed in a vehicle for a driving test. The driving test confirmed the improvement of the dynamic comfort of the seat. The result of evaluation of the improved seat using the SEAT index, an industry standard widely used to evaluate the dynamic comfort of a seat considering the perceptivity characteristics of the human body, showed that the perceptive vibration transmission had reduced by more than $11\%$. The effect of the modification of seat foam was also verified through a subjective assessment of dynamic comfort of the seats.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.2
• /
• pp.11-18
• /
• 2002

Psychological and physiological effects of the simulator sickness could be important bias factors for the sensibility evaluation. The purpose of the present study was to clear the differences of psychophysiological responses due to individual sensitivity of simulator sickness. The present experiment tried to investigate the simulator sickness objectively by observing the change of the simulator sickness for the different level of sickness groups (sick and non_sick group). The subjective evaluations using Simulator Sickness Questionnaire (SSQ) and physiological responses were measured every five minutes when they were driving as 60km/h in the driving graphic simulator. Response level of the subjective evaluation for all subjects on the simulator sickness was linearly increased with time for every item, and the response level of sick group was bigger than that of non_sick group. When the analysis on central nervous system was done separately on the sick and the non_sick group, there was significant difference in the parameter $\theta$/total at Fz and Cz. Although the analysis on autonomic nervous system for all subjects showed the increased activation of sympathetic nervous system, there was no significant difference between the sick and non_sick group. In summary, it is necessary to select the subjects who feel less simulator sickness in order to be accurate sensibility evaluation. The parameters to distinguish between the sick and non_sick group were the change on $\theta$/total and subjective evaluation using SSQ.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.35-46
• /
• 2020

In this paper, a fracture mechanics evaluation system which can be used to assess the leak-before-break (LBB) of nuclear piping is developed. Existing solutions for calculating the fracture mechanics parameters (J-integral and crack opening displacement) required for LBB evaluation were firstly presented. Then a module for calculating J-integral and COD was developed, with an additional module for predicting the critical load based on the crack driving force diagram to finally develop a fracture mechanics evaluation system. To confirm the validity of the proposed evaluation system, finite element (FE) analysis was performed, and the FE J-integral and COD results were compared with prediction results using the J-integral and COD estimations program. Furthermore, the critical load assessment module was verified by comparing the actual pipe test results (Battelle test data) with prediction results using the proposed program.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.788-792
• /
• 2004

In this study, the performance of the DPRMs is evaluated and the measurement precision for the pile driving is presented. The DPRMs is a visual-measurement system for the pile rebound and the penetration movement using a high speed line-scan camera. But the measurement errors of the DPRMs are caused by the strong impact for the pile driving. Therefore, the DPRMs should guarantee its measurement values for the pile driving. For this reason, the performance of the DPRMs by the vibration signal analysis is studied. It is found from this study that the measurement values of the DPRMs are reliable.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.11
• /
• pp.1005-1012
• /
• 2011

Diverse sports are appearing due to the enhanced quality of life and improved cultural standards of the present society. In particular, as golf gains greater popularity from the public, many golf ranges are being constructed near residential areas. However, the hitting noise generated by golf disrupt the pleasant living environment of neighboring residents to generate strong disputes related with noise. In this perspective, this study analyzed the characteristics and dispersion of sound pressure level according to the frequency of hitting noises generated in golf driving ranges and used this data to predict the range of effect through computer simulation. Thus, it is stipulated that these research results can be used as useful data for establishing effective plans in the future during civil complaints reported in relation to hitting noises in golf driving ranges.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.1
• /
• pp.67-73
• /
• 2021

The need for precise location data is growing across numerous markets, and so is the number of affordable high-precision GPS receivers. In this paper, we validated the performance of RTAP2U, a low-cost high-precision RTK receiver that was recently released. Two positioning modes were tested: static and driving. The static test conducted Zero-Baseline Single-RTK and Network-RTK survey for 57 hours and 51 hours, respectively. For the driving test, Network-RTK survey was conducted using VRS services provided by NGII based on Trimble PIVOT and Geo++ GNSMART. The static test showed about 1 cm horizontal and vertical accuracies, which is very stable considering the test duration longer than 50 hours. The integer ambiguity FIX rate marked a solid 100%. The driving test result also reached a 100% FIX rate. Horizontal and vertical accuracies were better than 2 cm and 3 cm, respectively. Researchers can refer to this paper when considering affordable high-precision GPS receivers as an option.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2001.07a
• /
• pp.103-108
• /
• 2001

• Journal of Drive and Control
• /
• v.3 no.2
• /
• pp.14-19
• /
• 2006

• IE interfaces
• /
• v.23 no.2
• /
• pp.100-107
• /
• 2010

For proper ergonomic evaluation using a digital human model simulation (DHMS) system such as $RAMSIS^{(R)}$, the postures of humanoids for designated tasks need to be predicted accurately. The present study (1) evaluated the accuracy of driving postures of humanoids predicted by RAMSIS, (2) proposed a method to improve its accuracy, and (3) examined the effectiveness of the proposed method. The driving postures of 12 participants in a seating buck were measured by a motion capture system and compared with their corresponding postures predicted by RAMSIS. Significant discrepancies ($8.7^{\circ}$ to $74.9^{\circ}$) between predicted and measured postures were observed for different body parts and driving tasks. Two methods (constraints addition and user-defined posture) were proposed and their effects on posture estimation accuracy were examined. Of the two proposed methods, the user-defined posture method was found preferred, reducing posture estimation errors by 11.5% to 84.9%. Both the posture prediction accuracy assessment protocol and user-defined posture method would be of use for practitioners to improve the accuracy of predicted postures of humanoids in virtual environments.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.91-101
• /
• 2003

This study modeled 4-lane highway in three-dimensional virtual reality in order to overcome difficulties of field experiment. and the research subject was placed in a driving simulator. We survey the driver's cognitive characteristics to the alignment changes in the three-dimensional virtual reality highway. Especially, maximizing the identity of driving movements and virtual scenery on the basis of the data obtained by dynamic analysis module. we minimized simulator sickness for the graphic module of driving simulator. And we carried out cognitive evaluation on the basis of adjective words extracted by dictionary and the opinion of specialist. In this study LISREL model was used to detect the causal relation between geometry and safety in cognitive side, and found that geometric change affects the safety of drivers by static and dynamic road safety model in three-dimensional combined alignments. As the result, for constructing safety road. we consider drivers' cognitive characteristics as human factors in road design, and we think that they are very important factors to improve road safety.