• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9C
• /
• pp.756-760
• /
• 2010

This paper is proposed to an novel facial behavior recognition system for driver's fatigue detection. Facial behavior is shown in various facial feature such as head expression, head pose, gaze, wrinkles. But it is very difficult to clearly discriminate a certain behavior by the obtained facial feature. Because, the behavior of a person is complicated and the face representing behavior is vague in providing enough information. The proposed system for facial behavior recognition first performs detection facial feature such as eye tracking, facial feature tracking, furrow detection, head orientation estimation, head motion detection and indicates the obtained feature by AU of FACS. On the basis of the obtained AU, it infers probability each state occur through Bayesian network.

• Journal of the Ergonomics Society of Korea
• /
• v.25 no.4
• /
• pp.137-144
• /
• 2006

The goal of this study is to find out correlation between Driver's Unsafe acts(errors and violations) and Personality types. The experiment was performed on 180 subjects, men and women between 20's and 60's having experience in driving for 6 months at least. Personality types of the subjects were classified by MBTI(Myers-Briggs Type Indicator) GS type and Driver's unsafe acts were measured by KDBQ(Korean Driver Behavior Questionnaire) based on Reason's DBQ(Driver Behavior Questionnaire). The result of experiment showed several facts about the relation. The first is that the drivers of P (Perceiving) type commit more violations and slips than drivers of J(Judging) type. The second is that in the comparison among attitude indexes(EP, EJ, IP, IJ) the drivers of EP(Extroversions - Perceiving) commit more violations than other type drivers. Finally, only men of P(Perceiving) type commits more violations than men of J(Judging). Based on these facts, it is possible to use Personality types as a device to prevent unsafe acts in various fields for driver selection and accident prevention training classified by Personality types etc.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.119-128
• /
• 2022

Recently, due to the development of related technologies for autonomous vehicles, driving work is changing more safely. However, the development of support technologies for level 5 full autonomous driving is still insufficient. That is, even in the case of an autonomous vehicle, the driver needs to drive through forward attention while driving. In this paper, we propose a method to monitor driving tasks by recognizing driver behavior. The proposed method uses pre-trained deep convolutional neural network models to recognize whether the driver's face or body has unnecessary movement. The use of pre-trained Deep Convolitional Neural Network (DCNN) models enables high accuracy in relatively short time, and has the advantage of overcoming limitations in collecting a small number of driver behavior learning data. The proposed method can be applied to an intelligent vehicle safety driving support system, such as driver drowsy driving detection and abnormal driving detection.

• International Journal of Automotive Technology
• /
• v.7 no.5
• /
• pp.603-608
• /
• 2006

As an important and relatively easy to implement technology for realizing Intelligent Transportation Systems(ITS), Adaptive Cruise Control(ACC) automatically adjusts vehicle speed and distance to a preceding vehicle, thus enhancing driver comfort and safety. One of the key issues associated with ACC development is usability and user acceptance. Control parameters in ACC should be optimized in such a way that the system does not conflict with driving behavior of the driver and further that the driver feels comfortable with ACC. A driving simulator is a comprehensive research tool that can be applied to various human factor studies and vehicle system development in a safe and controlled environment. This study investigated driving behavior with ACC for drivers with different driving styles using the driving simulator. The ACC simulation system was implemented on the simulator and its performance was evaluated first. The Driving Style Questionnaire(DSQ) was used to classify the driving styles of the drivers in the simulator experiment. The experiment results show that, when driving with ACC, preferred headway-time was 1.5 seconds regardless of the driving styles, implying consistency in driving speed and safe distance. However, the lane keeping ability reduced, showing the larger deviation in vehicle lateral position and larger head and eye movement. It is suggested that integration of ACC and lateral control can enhance driver safety and comfort even further.

• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.117-126
• /
• 2012

Understanding driver's characteristic of visual activity is important process because driver depends on a visual signal more than 90% for getting outside information needed to drive, thus a series of driving, including perception, judgement, and activity, is completed. This study analyzes quantified driver's sight range in curved section where recognition of various information is critical due to biggest speed change among sections. Simulation is utilized for this study because of safety problem on field experiment and difficulties in using equipment. Building 6 roads that have different in curve radius by virtual driving map, experiment is carried out recruiting 30 people. Through analytical researches, it shows that drivers keep an eye on direction of driving, and driver's visual range is narrowed on left curve than right curve, and the more curve radius become small, the more drivers see in narrow angle.

• Journal of the Korean Society of Safety
• /
• v.22 no.1 s.79
• /
• pp.61-66
• /
• 2007

Car crashes are the leading cause of death for persons of every age. Specially, human-related factor has been known to be the primary causal factor of such crashes than vehicle-and environmental-related factors. There are various studies to analyze driver's behavior and characteristics in driving for reducing the car crashes in many areas of car engineering, psychology, human factor, etc. However, there are almost no studies which analyze mainly the human errors in driving and estimate their probabilities in terms of human reliability analysis. This study estimates the probability of human error in driving, i.e. driver error probability. First, fifty driver errors are investigated through DBQ (Driver Behavior Questionnaire) revision and the error likelihoods in driving are collected which are judged by skillful drivers using revised DBQ. Next, these likelihoods are converted into driver error probabilities using the results that verbal probabilistic expressions are changed into quantitative probabilities. Using these probabilities we can improve the warning effects on drivers by indicating their driving error likelihoods quantitatively. We can also expect the reduction effects of car accident through controlling especially dangerous error groups which have higher probabilities. Like these, the results of this study can be used as the primary materials of safety education on drivers.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.111-122
• /
• 2004

The driver's decision making (e.g. route choice) is a typical decision making with an uncertainty. In this paper, we investigate the effect of route guidance information on driver's route choice and learning behavior and analyse the potential of information system in a road network in which traffic flows follow random walk. A Simulation performed focuses on the relationship among the network wide performance, message receiving rates and driver's learning mechanism. We know that at high levels of message receiving rates, the network-wide performance may get worse. However, at low levels of receiving rates, we found that the travel time when guidance information is provided decrease compared to the cases when no pubic information is provided. Also, we found that the learning parameter of the learning mechanism model always changes under nonstationary traffic condition. In addition, learning process of drivers does not converge on any specific value. More investigation is needed to enlarge the scope of the study and to explore more deeply driver's behavior.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1D
• /
• pp.11-19
• /
• 2008

Currently, existing car following models among several basic systems of advanced vehicle systems are almost developed related to the physical relation between two vehicles except for the driver's behavior or environmental factors. But the consideration of driver's character and environmental factors on driving are very essential factors for actual application. Hence, we suggested calibrating the degree of driver's discomfort on driving that is the former study to develop a new car following model of advanced vehicle to use in actuality. The degree of driver's discomfortness (Measure-of-Alarmness; MOA)is measured related to the relationship between the following vehicle and the preceding vehicle, the environmental factors and driver's characters in ubiquitous traffic. We made up questions to drivers to obtain the general and the objective measurement of driver's MOA. And the fuzzy logic model for measurement of MOA was constructed based on the results of survey. We verified the suitability of fuzzy logic model through the computation of MOA with several scenarios. And we measured the quantitative degree of driver's discomfortness on car following related to several factors which affect drivers. In accordance with this study, development of car following model applying driver's MOA will promote the actual application of advanced vehicle more effectively than the existing models. Finally, we thought the measurement of driver's MOA will be applied significantly to evaluate safety and comfort of drivers on driving.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.145-154
• /
• 2006

In the companion paper, the composition and structure of the MATDYMO (Multi-Agent for Traffic Simulation with Vehicle Dynamic Model) were proposed. MATDYMO consists of the road management system, the vehicle motion control system, the driver management system, and the integration control system. Among these systems, the road management system and the integration control system were discussed In the companion paper. In this paper, the vehicle motion control system and the driver management system are discussed. The driver management system constructs the driver agent capable of having different driving styles ranging from slow and careful driving to fast and aggressive driving through the yielding index and passing index. According to these indices, the agents pass or yield their lane for other vehicles; the driver management system constructs the vehicle agents capable of representing the physical vehicle itself. A vehicle agent shows its behavior according to its dynamic characteristics. The vehicle agent contains the nonlinear subcomponents of engine, torque converter, automatic transmission, and wheels. The simulation is conducted for an interrupted flow model and its results are verified by comparison with the results from a commercial software, TRANSYT-7F. The interrupted flow model simulation is implemented for three cases. The first case analyzes the agents' behaviors in the interrupted flow model and it confirms that the agent's behavior could characterize the diversity of human behavior and vehicle well through every rule and communication frameworks. The second case analyzes the traffic signals changed at different intervals and as the acceleration rate changed. The third case analyzes the effects of the traffic signals and traffic volume. The results of these analyses showed that the change of the traffic state was closely related with the vehicle acceleration rate, traffic volume, and the traffic signal interval between intersections. These simulations confirmed that MATDYMO can represent the real traffic condition of the interrupted flow model. At the current stage of development, MATDYMO shows great promise and has significant implications on future traffic state forecasting research.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.5
• /
• pp.735-739
• /
• 2010

Driving workload is increasing according to developing new in-vehicle devices and introducing driving information systems. In this research using a driving simulator, EFRP (Eye Fixation Related Potential) was measured for evaluating driving attention and distraction while tasking cognitive workload, n-back tasks. The result of EFRP was compared with driver behaviors. Results suggest that EFRP is able to use for a method of evaluating driving workload, however, the analysis of driver behavior is difficult to find driving attention and distraction in the case of free flow of traffic situation.