• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.525-527
• /
• 2009

본 논문에서는 자동차 공조부품인 리시버드라이어로서 플랜지와 바디로 구성되어 있다. 리시버드라이어는 냉매 중 포함된 습기 및 기타 불순물을 차단하는 부품으로서 사이트글라스가 부착되어 냉매의 흐름의 상태를 알 수 있다. 또한 압력 밸브가 부착되어 있어 냉매 회로의 압력과 온도가 상승하면 녹아서 냉매를 배출하므로 배관이나 부품들의 압력에 의해서 파괴되는 것을 방지 할 수 있다. 최근 경제적 성형에 관심이 많아 대표적 성형공정인 냉간단조를 적용하여 소재 회수율 및 절삭 비용 등을 절감하는데 목적을 두었다. 냉간단조를 적용하여 자동차 공조 부품인 플랜지와 바디를 개발하는데 공정설계, 금형설계, 금형제작 기술을 확보하였다.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.11
• /
• pp.616-621
• /
• 2002

With biological effects by ELF (Extremely Low Frequency) magnetic field generated from power system, the transient magnetic field from electric appliances is a major issue presently. Because the transient magnetic field induces higher current than the power frequency field inside living bodies, transient magnetic field exposure has been much focused. In this paper, it is shown that transient magnetic field from electric home appliances can be characterized as magnetic dipole moment. In this method, the dipole moment vector is assumed by allowing an uncertainty of 6dB in the estimated field. A parameter M that represents biological interaction was applied also. The proposed method was applied to 7 types of appliances (hair drier, heater, VDT, etc.) and their equivalent magnetic dipole moment and harmonic components were estimated. As the results, the useful data for quantifying magnetic field distribution around electric appliances were obtained.

• Journal of Ginseng Research
• /
• v.9 no.2
• /
• pp.248-255
• /
• 1985

In order to investigate the optimal drying condition of white ginseng by using bulk air drier(130 x 62 x 65cm), drying curves, diffusion coefficient at various drying temperature, the energy of activation, variation of color intensity and chemical components during drying of white ginseng were studied. Fick's second low of diffusion for diffusion out of spheres was successfully applied to describe the drying of white ginseng. It was found that the diffusion coefficient of water was 2.2x107, 9.0x107 cm2/sec at drying temperature 4$0^{\circ}C$, 55$^{\circ}C$, respectively. An Arrhenius type temperature dependency of moisture diffusivity was found, the energy of activation being 18.8 Kcal/g mol. Color intensity of white ginseng dried at various drying temperature was increased with an increase in drying temperature. The contents of crude protein, reducing sugar and crude saponin during drying of white ginseng were gradually decreased as increasing of drying time. And with the sensory evaluation by multiple comparison difference analysis, the optimal drying temperature of white ginseng was between 45$^{\circ}C$ and 5$0^{\circ}C$.

• 한국약용작물학회:학술대회논문집
• /
• 2008.05a
• /
• pp.156-157
• /
• 2008

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.704-709
• /
• 2003

The automobile air conditioning system generally consists of laminated type evaporator, swash plate type compressor, condenser, expansion valve and receiver drier. A swash plate type compressor has been used widely in automobile air conditioning system since 1955, because of wider operation range and better durability than other type compressors. In this study, the performance of an swash plate type compressor with variations of oil charging conditions has been investigated experimentally using the hot gas system. Further, the effects of varying compressor speed on the performance of the compressor has been discussed.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.3
• /
• pp.909-922
• /
• 2000

High sped messaging layer for application's feeling of low level network performance is needed by Clustering System based on high speed network fabrics. It should have the mechanism to directly pass messages between network card and application space, and provide flexible affodabilities for many diverse applications. In this paper, CROWN (Clustering Resources On Workstations' Network) which is designed and implemented for multi-purpose clustering system will be introduced briefly, and CLCP(CROWN Lean Communication Primitives)which is the high speed messaging layer for CROWN will be followed. CLCP consists of a firmware for controlling Myrinet card, device drier, and user libraries. CLCP supports various application domains as a result of pooling and interrupt receive mechanism. In case of polling based receive, 8 bytes short message, and no other process, CLCP has 262 micro-second response time between two nodes, and IM bytes large message, it shows 442Mbps bandwidth.

• Radiation Oncology Journal
• /
• v.18 no.3
• /
• pp.200-204
• /
• 2000

Purpose : We already reported the results that aqueous extract of Korean ginseng roots showed a marked cytotoxicity. In this study, we investigated whether combined ginseng product with X-irradiation increase the cytotoxicity of tumor cells than X-irradiation or not. Materials and Methods : Fifty gram of Korean ginseng powder mixed with 1 L of distilled water was extracted with reflux flask under condition of $100^{\circ}C$ for 5 hrs. This aquaous ginseng extract was filtered, centrifuged and then was freezed under condition of $-90^{\circ}C$ for 16-18 hrs. The freezing extract was dried with freeze drier, and then diluted. X-irradiation was given to tumor cells by 6 MeV linear accelerator. The cytotoxicity of ginseng in vitro was evaluated from its ability to reduce the clonogenecity of fibrosarcoma (FSa II) cells. In X-irradiation alone group, each 2, 4, 6 and 8 Gy was given to tumor cells. In X-irradiation with ginseng group, 0.2 mg/mL of ginseng extract was exposed to tumor cells for 1 hour before X-irradiation. Results : The yield for 50 g of ginseng extract which was treated with freezing drier was 3.13 g($6.3\%$). Cytotoxicity In vitro was measured as survival fraction which was judged from the curve, at ginseng concentration of 0.001, 0.01, 0.1 and 1 mg/mL were $0.89\pm0.04$, $0.86\pm0.06$, $0.73\pm0.01$ and $0.09\pm0.02$, respectively. Survival fraction at X-irradiation alone of 2, 4, 6 and 8 Gy were $0.81\pm0.07$, $0.42\pm0.08$, $0.15\pm0.02$, $0.03\pm0.01$, respectively. But, suwival fraction in combined group of X-irradiation and ginseng (0.2mg/ml) at each same radiation dose were $0.28\pm0.01$, $0.18\pm0.03$, $0.08\pm0.02$, $0.006\pm0.002$, respectively (p<0.05). Conclusion : The yield for ginseng extract which was treated with freezing drier was $6.3\%$. Cytotoxicty of Fsa 11 in combined ginseng with X-irradiation group was increased than that of X-irradition alone group, and its enhancing effect seemed to be added.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.625-630
• /
• 1999

This work was to study drying characteristics of the brown rice koji, an enzymic health food, using microwave under vacuum. Cooked brown rice was inoculated with Aspergillus oryzae and incubated at $32^{\circ}C$ for 6 days. The brown rice koji was dried by different drying methods: microwave vacuum drying, hot air drying, vacuum drying and freeze drying. Each drier except freeze drier was set to maintain the sample temperature at $40^{\circ}C$. During microwave vacuum drying, the sample reached $40^{\circ}C$ much faster (within $5{\sim}10\;min$) and was dried much faster (2 hrs) than the other drying methods. The initial drying rate of microwave vacuum drying was ten times faster than that of hot air drying. The microwave vacuum drying produced a dry sample of the highly retained enzymic activity, followed by freeze drying, vacuum drying, and hot air drying.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1107-1113
• /
• 1998

This work was to study the potential use of germinated and microwave-vacuum-dried brown rite as a raw material for enzyme food. Brown rice was soaked in water at $15^{\circ}C$ for 2 days and then germinated at $25^{\circ}C$ for 4 days. The germin ated brown rice was then dried by different drying methods: microwave vacuum drying 1(drying only), microwave vacuum drying 2 $(drying{\rightarrow}crushing{\rightarrow}drying)$, hot air drying, vacuum drying and freeze drying. Each drier except freeze drier was set to maintain the sample temperature to be $60^{\circ}C$. During microwave vacuum drying 1 and 2 the sample reached $60^{\circ}C$ much faster (5 min) and was dried much faster (2 to 3 hrs for microwave vacuum drying 1 and 2 than the other drying methods. The initial drying rate of microwave vacuum drying was ten times faster than that of hot air drying. The microwave vacuum drying produced a dry sample of the highly retained enzymic activity, followed by freeze drying, vacuum drying and hot air drying.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1067-1074
• /
• 2001

Four different composition of autoxidation drying type waterborne coatings (WBC-1, WBC-2, WBC-3, WBC-4) were prepared by the compounding of bentonite (BEN) as a water swellable clay and organometallic soaps as a drier with acrylic binder and coating additives. The solution viscosity, solid content, rheological properties and drying rate of WBCs were investigated. Also the thermal stability, the transmittance and the water-resistance of the films casted by WBCs were measured, and the surface topology of WBC films were investigated by the scanning probe microscopy. As WBC-2, WBC-3 and WBC-4 containing BEN showed the thixotropy with the shear rate, the storage stability of WBC was a excellent. When the driers was mixed in the ratio of Mn/Zn/Ba=1/2/3, the dry ability of WBCs showed maximum as 5.0 sec at 60$\^{C}$. The initial decomposition temperature and the transmittance of WBC films containing BEN increased in range of 32.2∼54.7$\^{C}$ and 5.1∼8.6% than the commercial WBC (MC-21W), respectively. The water resistance of WBC films increased in order of MC-21W