• Korean Journal of Medicinal Crop Science
• /
• v.18 no.1
• /
• pp.9-14
• /
• 2010

Several presowing seed treatments have been used to facilitate the seed germination and seedling emergence. The study was performed to design a model of presowing seed treatments in Taraxacum platycarpum. Germination and seedling growth responses to temperature, drying, chilling, $GA_3$ and priming were investigated to know the optimum germination conditions and presowing treatment. The optimum temperature condition for germination and seedling growth were $15{\sim}20^{\circ}C$ at dark condition. The seeds exposed to infra red light, however, did not germinate. The moisture content of seeds dried at $35^{\circ}C$ for 3.5 hours was returned to the level of unimbibed seeds. The germination of seeds dried under dark condition was better than those dried under infra red light. Prechilling treatment imposed for 6 weeks showed higher germination rate than $GA_3$ treatment or priming. In field test, the highest field emergence was observed in the seeds dried after prechilled for 6 weeks and followed by drying followed by $GA_3$ > low temperature > $KNO_3$ priming. Imbibition with 0.1 mM $GA_3$ solution for 2 hours then drying at 35 for 3.5 hour under dark condition was effective to the practical presowing treatment for Taraxacum seeds.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.4
• /
• pp.37-42
• /
• 1994

The adsorption of water vapor and equilibrium moisture content(EMC) of the specimens for four softwood species dried by conventional- and high temperature method and equilibrated to 15% of the target EMC condition at 25$^{\circ}C$ were determined by oven drying method and with moisture meters. The amount of adsorption for high temperature dried red pine was significantly higher than that of conventional kiln dried wood, while those of eastern white pine, eastern hemlock and Norway spruce were not significantly different between drying methods. EMCs of these four species determined by oven drying method and with capacitive admittance moisture meter were not significantly different between drying methods. EMC of high temperature dried red pine determined with resistance moisture meter was significantly higher than that of conventional kiln dried wood. But EMCs of other species did not show significant difference between drying methods. EMCs of conventional and high-temperature dried wood determined with electronic moisture meters, especially in the case of the capacitive-admittance moisture meter measurement, were lower than that determined by oven drying method.

• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.597-603
• /
• 2015

The purpose of this study was to investigate the influence of processing conditions (temperature and time) and binding agent types (glutinous rice flour, potato starch, bean flour, and acorn flour) on the physicochemical and sensory characteristics of ground dried-pork meat product. For this purpose, ground dried-pork meat product was produced by adding several binding agents at different drying temperatures and times. The drying time affected moisture content and water activity in all drying temperature. However, under the similar drying conditions, the extent of drying varied depending on the type of binding agents. The results of sensory evaluation for texture degree and overall acceptability indicated the following: overall, higher drying temperatures and longer drying time heightened the degree of texture, and the overall acceptability varied depending on binding agent type. Physicochemical and sensory characteristics were analyzed to determine any possible correlation. The results revealed a high correlation between moisture content, water activity, shear forces, and sensory evaluation (p<0.01). However, there was no correlation with respect to overall acceptability.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.167-167
• /
• 1982

Italian poplar (Populus euramericana) rotary veneers were press-dried and air-dried to study drying curves, thickness shrinkage and width shrinkage of them under several drying conditions such as drying temperatures and veneer thicknesses. The results of the study are summarized as follows; 1. In press-drying, drying times from green condition to about final moisture content of 10 percent with veneer thickness of 0.6mm by platen temperatures required about 10 minutes at platen temperature of $100^{\circ}C$, 3 minutes at $110^{\circ}C$, 1 minute at $120^{\circ}C$ and $130^{\circ}C$, respectively. 2. In press, drying, drying times from green condition to about final moisture content of 10 percent by veneer thicknesses required 2 minutes at veneer thickness of 0.6mm, 4 minutes at 1.2mm,6 minutes at 1.8mm and 9 minutes at 3.6mm, respectively. 3. In air-drying, drying times from green condition to air-dried moisture content by veneer thicknesses required 15 hours at veneer thickness of 0.6mm, 18 hours at 1.2mm and 23 hours at 2.4mm, respectively. 4. Thickness shrinkage of press-drying was remarkably greater than that of air-drying, but width shrinkage of press-drying was rather smaller. 5. Difference of thickness shrinkage among platen temperatures was insignificant, and width shrinkage at platen temperature of $130^{\circ}C$ was the least.

• YAKHAK HOEJI
• /
• v.43 no.6
• /
• pp.793-797
• /
• 1999

Salmonella typhi Ty21a is an attenuated strain of S. typhimurium and used for oral typhoid vaccine. In an attempt to increase the stability of Ty21a manufacturing typhoid vaccine, we studied about the stability of freeze-dried Th21a including additives at various temperature conditions. In order to investigate the freeze-drying rate of Ty21a according to various absorbance, we lyophilized Ty21a by using 8% sucrose as a stabilizer. The optimal freeze-drying rate of Ty21a was appeared when OD (optical density) value of the growth was between 2.5 and 3.0. To investigate the stability of Ty21a at various temperature, the viability was measured after storaging the freeze-dried Ty21a at the room temperature, cold and freezing condition for 1 week. The viability of Ty21a in cold and freezing storage condition was 5 times more stable than in room temperature. To search the most stable additives for the freeze-dried Ty21a, the viability of Ty21a including additives at the various storage condition was estimated. Mannitol and loctose were the most stable additives. Theses results suggest that the OD value of Ty21a growth, low temperature, mannitol and lactose are important factors for the optimal freeze-drying rate, the stable storage and the most stable additives, respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.2
• /
• pp.111-116
• /
• 1982

For the effective utilization of the fish resources in coastal regions, investigations on processing conditions of frozen-dried product, quality stability of the Product during storage, and utilization as a food material were carried out with the filefish, Navoden modestus. The processing condition was determined with the moisture content and texture of the product. The duality of the product was evaluated on chemical composition, rehydration capacity, TBA value, browning, omission test and sensory score. The conditions for the processing of frozen-dried filefish under the conditions of freezing temperature at $-10^{\circ}C$ and forced air thawing at $56{\pm}2^{\circ}C$ with a velocity of 1 m/sec were as follows : freezing temperature, $-10^{\circ}C$ : freezing time, 10 hours; thawing time, 2 hours ; and repeated number of freezing and thawing, 5 times. The yield, the condition of moisture and protein were $10.2\%,\;23.6\%\;and\;70.6\%$, respectively. The frozen-dried product packed with air and stored at room temperature showed no remarkable changes in TBA value, rehydration capacity, browning during the storage period of 90days. The frozen-dried filefish showed no remarkable differences in the taste, odor and texture, comparing with frozen-dried Alaska pollack on the market.

• Korean Journal of Food Science and Technology
• /
• v.48 no.1
• /
• pp.15-19
• /
• 2016

Drying process was applied to increase the antioxidant activity of onion powder: freeze-drying or air-drying at 50, 70, and $90^{\circ}C$ and onion extracts were obtained from each powder using water or aqueous ethanol (50%) at $25^{\circ}C$ and $60^{\circ}C$. In the color analysis, the freeze-dried powders showed higher $L^*$ and lower $a^*$ and $b^*$ values than did the air-dried ones. The browning index of powders air-dried at $90^{\circ}C$ was significantly higher than that of freeze-dried powders or those air-dried at temperatures below $90^{\circ}C$. Phenolic content in the extracts was 4.02-23.12 mg gallic acid equivalent/g sample, and was the highest in the extract from the sample air-dried at $90^{\circ}C$, regardless of the extraction condition. The highest antioxidant activity, measured by 2,2-azinobis-3-ethylbenzothiazoline-6-sulfonic acid and 1,1-diphenyl-2-picrylhydrazyl methods, was found in the powder air-dried at $90^{\circ}C$, which induced browning. These findings indicate that antioxidant activity depends more on browning during drying than on extraction conditions.

• Journal of Veterinary Clinics
• /
• v.20 no.4
• /
• pp.482-488
• /
• 2003

Transplanted cortical bone grafts of freeze-dried bones also function as sustaining for defected bones, however, it has less strength and is fragile without rehydration. In this study, strength and stiffness of freeze-dried bone from bovine cortical bones were evaluated by three point bending test according to different time frames such as rehydration times of 0.5, 3, 6, 12 and 24 hrs in electrolyte solution and was compared with those of frozen bones. The strength and stiffness of frozen bone were $264.4\pm36.7$ MPa, $17.0\pm1.5$ GPa, respectively. The strength and stiffness of freeze-dried bone which fat was removed by treatments of chloroform-methanol solutions for 6 days, then was freeze-dried at $-80^{\circ}C$ and sterilized with ethylene oxide gas, were $224.9\pm27.6$ MPa, $19.2\pm2.8$ GPa, respectively. The strength and stiffness of feeze-dried bone were decreased 15.0% and increased 13.2% than these of frozen bone, respectively. The strength and stiffness of freeze-dried bone rehydrated for 6 hrs were restored to 96.0% strength and 99.2% stiffness of frozen bone. The rehydration time of freeze-dried bone which had the highest strength and stiffness was six hours and three hours, respectively. The results of the mathematica program for the variation of the strength and stiffness showed 3 hours and 30 minutes of rehydration time in electrolyte solution for the best condition in the strength and stiffness which was adequate to treat freeze-dried cortical bone.

• Journal of Marine Bioscience and Biotechnology
• /
• v.16 no.1
• /
• pp.19-25
• /
• 2024

To verify the color change in dried laver postproduction during the heating process, chromaticity elements were compared via a spectrophotometer across various heating conditions within the visible light spectrum. In general, the moisture reduction rate increased with rising temperature and time. Surface image comparisons revealed an expanded area of light reflection on the heat-treated dried laver sample due to surface roughening from shrinkage. No statistically significant differences in chromaticity values were observed in the measurements of brightness (L^*), redness (a^*), and yellowness (b^*). Reflectance spectrum measurements in the visible light region confirmed high reflectance under red wavelength conditions. In particular, a significant increase in reflectance at 700 nm compared with untreated samples was noted. The correlation between the increase in 700 nm reflectance of dried laver samples and heating conditions ranged from 0.7471 to 0.7793, suggesting its potential use as an indicator for comparing color changes in dried laver based on heating conditions.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.206-211
• /
• 1987

In an attempt to improve the quality stability of dried layer (Porphyra yezoensis Ueda), during longterm storage and distribution, a 6 months storage trial at different temperature and packaging condition was conducted. Dried layer samples were prepared by conventional procedure with different washing condition and $5^{\circ}C$ and $30^{\circ}C$ were employed as storage temperature. The moisture sorption isotherm was drawn at $5^{\circ}C$ and $25^{\circ}C$ and BET equation was prepared from the moisture sorption isotherm. The monolayer moisture contents of dried layer were 7.4% at $5^{\circ}C$ and 6.4% at $25^{\circ}C$, respectively. It was also found that the changes in comprehensive quality of dried layer during storage was much less at low temperature and the degree of washing before drying process as far as its moisture contents are lower than monolayer moisture contents. With regard to the packing methods, vaccum packing was superior to air containing packaging for the maintainance of quality during storage.