• Asian-Australasian Journal of Animal Sciences
• /
• 제11권2호
• /
• pp.121-127
• /
• 1998

Thirty two Omani sheep with eight animals each of; intact males (INT), males castrated with rubber rings immediately after birth (RR), males castrated with a burdizzo at 8 weeks of age (BC) and intact females (IF) were fed ad libitum a concentrate diet (CP 16%) plus chopped Rhodesgrass hay (8% CP) from weaning until slaughter at 28 kg. INT lambs grew faster from 9 to 20 weeks of age (p < 0.05) thus they were significantly heavier at 20 weeks of age than BC and IF, but not RR lambs. INT consumed more total feed than other sex groups over the period from 9 to 20 weeks of age. There were no significant differences between lambs of all experimental groups in feed per gain ratio. INT lambs had lower (p < 0.01) dressing percentage (DP) than RR, BC and IF. As a percentage in the empty body weight (EBW), INT had higher proportions of head, feet, empty gut (p < 0.001), liver (p < 0.05) and genitals (p < 0.05) but lower proportions of lungs and trachea (p < 0.05) than BC and IF lambs. INT males had a significantly higher (p < 0.05) proportion of bone than RR and IF lambs but lower (p < 0.05) proportion of fat than RR and IF. As a percentage in EBW, IF had the highest protortion (p < 0.001) of total body fat (TBF) followed by BC and RR whereas INT males had the lowest proportion. There was a general trend of IF having the highest proportion of individual and total non-carcass fat (TNCF) and total carcass fat (TCF) followed by BC and RR lambs whereas INT lambs had the lowest protortions of individual carcass and non-carcass fat depots. There were only few sex or castration effects on carcass tissue distribution. IF had higher proportions of intermuscular fat in the chuck, plate, leg and flank than INT and BC. The current study demonstrated that castration of intensively-raised male Omani native sheep especially at weaning using a burdizzo retarded growth rate and reduced carcass quality by increasing fat content.

• Archives of Plastic Surgery
• /
• 제44권3호
• /
• pp.194-201
• /
• 2017

Background Platelet-rich plasma (PRP) contains high concentrations of growth factors involved in wound healing. Hydrogel is a 3-dimensional, hydrophilic, high-molecular, reticular substance generally used as a dressing formulation to accelerate wound healing, and also used as a bio-applicable scaffold or vehicle. This study aimed to investigate the effects of PRP and hydrogel on wound healing, in combination and separately, in an animal wound model. Methods A total of 64 wounds, with 2 wounds on the back of each nude mouse, were classified into 4 groups: a control group, a hydrogel-only group, a PRP-only group, and a combined-treatment group. All mice were assessed for changes in wound size and photographed on scheduled dates. The number of blood vessels was measured in all specimens. Immunohistochemical staining was used for the analysis of vascular endothelial growth factor (VEGF) expression. Results Differences in the decrease and change in wound size in the combined-treatment group were more significant than those in the single-treatment groups on days 3, 5, 7, and 10. Analysis of the number of blood vessels through histological examination showed a pattern of increase over time that occurred in all groups, but the combined-treatment group exhibited the greatest increase on days 7 and 14. Immunohistochemical staining showed that VEGF expression in the combined-treatment group exhibited its highest value on day 7. Conclusions This experiment demonstrated improved wound healing using a PRP-hydrogel combined treatment compared to either treatment individually, resulting in a decrease in wound size and a shortening of the healing period.

• Archives of Plastic Surgery
• /
• 제43권6호
• /
• pp.590-594
• /
• 2016

Recently, the number of cases of animal bite wounds has increased significantly in concordance with an increase in the pet population around the world. The authors report two rare cases of osteomyelitis of the phalanx following cat and dog bites. On initial physical examination, signs of a severe infection were observed. Radiographs of both patients showed the presence of osteomyelitis, and in one of the patients, the diagnosis was confirmed with a bone biopsy. After use of empirical antibiotics, intravenous antibiotic therapy that matched the identified bacterium's sensitivity was initiated, and at the same time, secure dressing including debridement was performed to induce secondary healing. In addition, the patients were closely monitored with serial X-rays, and culture and blood test follow-up. One patient fully recovered without sequelae, but the other patient suffered a loss of distal interphalangeal joint motion. When dealing with bite wounds located on the hand, it is important to visit the hospital as soon as possible and receive the appropriate treatment early. Moreover, to prevent severe complications such as osteomyelitis, it is important to administer antibiotic therapy to which the cultured bacteria are sensitive, along with proper wound management and prophylactic antibiotic treatment.

• 복식
• /
• 제51권3호
• /
• pp.75-85
• /
• 2001

The system of washing and shrouding a dead body is a series of procedures for encoffining in funeral rites, which are taken after death indentification by using CHOKWANG and praying for the resurrection of a dead body by calling a soul departed from the body. The washing and shrouding a dead body (hereinafter reffered to as "YEOMSEUP") is the broad concept which contains the procedures of washing, clothing and shrouding the body. The clothing includes washing, putting rices into the mouth. and then dressing while the shrouding includes first wrapping, second-wrapping and encoffining. The clothes for YEOMSEUP (all clothes and articles for funeral rites are designated) will be put in the coffin along with a dead body according to the YEOMSEUP procedures. Dasan, a SILHAK scholar in the late Yi Dynasty, pointed out some problems of the funeral rites observed in those days. At the same time, he found that the problems had arisen from the misinterpretation of the original descriptions in Chinese characters. and had tried to correct them. The books written by Dasan basically emphasized his ideology reshaping the whole procedures by trimming and removing meaningless formalities which are too much luxurious and wasteful and making them as a part of the original principles of the funeral rites. His Intents are clearly shown in his wrings on practical ettiquttes, such as SANGRYESAJON and SANGUIJEOLYO. In its attempt, this study aims at reformulating the DASAN\\`s SANGRYESAJON in terms of YEOMSEUP methods. A lot of virtues of the Dasan, like WOOSU, SIMUI, DAEDAE, MO, SORYUMHYO and DAERYUMHYO could also be found accordingly. The merits and characteristic in funeral rites are an obedience in filial duty, the pursuit of frugality. and the efficiency of practical functions. It could be said that the resurvey of DASAN′s theory on YEOMSEUP procedures is a meaningful work today when the original meaning of funeral rites fades out. Furthermore, discussions of refined burial service and encouraging cremation designed to improve land use, which are widely spread among people, could weaken the basic philosophy of YEOMSEUP and more likely propagate the atmosphere of despising the dignity of human beings.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.243-247
• /
• 2008

Purpose: For a proper wound care, the correct evaluation of wound is very important. Usually the evaluation of wound was subjective, and as a result, wound care was empirical. There were many attempts to objectify the wound evaluation, and one of them was measurement of the wound pH. The purpose of this study is to observe the wound pH changes during wound healing phase. Methods: From 2005 to 2007, we measured the pH values of 6 acute wounds, which were split thickness skin graft donor sites. In addition, we measured the pH values of 18 chronic wounds, which were 17 pressure sores and 1 tuberculosis ulcer. After pH meter ($SkinCheck1^{(R)}$, Hanna Instruments, Italy) was calibrated, wound pH was checked. Wound was cleansed with saline gauze and dressed with polyurethane foam dressing($Medifoam^{(R)}$, Biopol, Korea). Results: In split thickness skin graft donor sites, the pH raised(mean pH value: $7.45{\rightarrow}7.62$) when the wound was on the process of healing(*p=0.027, analysis of Wilcoxon signed-rank test). If wound became re-epithelialised, the pH value dropped to that of normal skin. However, we could not find a relation between time and the pH values in chronic wound. Conclusion: We could observe the consistent wound pH changes during wound healing phase in acute wound.

• Archives of Plastic Surgery
• /
• 제41권6호
• /
• pp.668-672
• /
• 2014

Background Negative-pressure wound therapy (NPWT) is believed to accelerate wound healing by altering wound microvascular blood flow. Although many studies using laser Doppler have found that NPWT increases perfusion, recent work using other modalities has demonstrated that perfusion is reduced. The purpose of this study was to investigate the influence of NPWT on tissue oxygenation of the foot, which is the most sensitive region of the body to ischemia. Methods Transcutaneous partial pressure of oxygen ($TcpO_2$) was used to determine perfusion beneath NPWT dressings of 10 healthy feet. The sensor was placed on the tarso-metatarsal area of the foot and the NPWT dressing was placed above the sensor. $TcpO_2$ was measured until it reached a steady plateau state. The readings obtained at the suction-on period were compared with the initial baseline (pre-suction) readings. Results $TcpO_2$ decreased significantly immediately after applying NPWT, but gradually increased over time until reaching a steady plateau state. The decrease in $TcpO_2$ from baseline to the steady state was 2.9 to 13.9 mm Hg (mean, $9.3{\pm}3.6$ mm Hg; $13.5{\pm}5.8%$; P<0.01). All feet reached a plateau within 20 to 65 minutes after suction was applied. Conclusions NPWT significantly decrease tissue oxygenation of the foot by 2.9 to 13.9 mm Hg. NPWT should be used with caution on feet that do not have adequate tissue oxygenation for wound healing.

• Journal of Welding and Joining
• /
• 제34권1호
• /
• pp.41-46
• /
• 2016

With the recent increase in size of ships and offshore structures, there are more demand for thicker plates. As the thickness increases, it is known that fatigue life of the structures decrease. To improve the fatigue life, post weld treatments techniques, such as toe grinding, TIG dressing and hammer peening, are typically employed. However, these techniques require additional construction time and production cost. Therefore, it is of crucial interest steels with longer fatigue crack growth life compared to conventional steels. This study investigates fatigue crack growth rate (FCGR) behaviours of conventional EH36 steel and Ferrite-Bainite dual phase EH36 steel (F-B steel). F-B steel is known to have improved fatigue performance associated with the existence of two different phases. Ferrite-Bainite dual phase microstructures are obtained by special thermo mechanical control process (TMCP). FCGR behaviours are investigated by a series of constant stress-controlled FCGR tests. Considering all test conditions (ambient, low temperature, high stress ratio), it is shown that FCGR of F-B steel is slower than that of conventional EH36 steel. From the tensile tests and impact tests, F-B steel exhibits higher values of strength and impact energy leading to slower FCGR.

• Korean Journal of Acupuncture
• /
• 제28권3호
• /
• pp.141-150
• /
• 2011

Objectives : The aims of this study were to evaluate a blister caused by cupping. Methods : We searched relevant case reports, survey, and review articles using databases of online bibliography. Results : 1. The fluid in the blister caused by cupping therapy is normal substance by laboratory analysis. The fluid has no signs of infection in the culture, Gram stain, or tissue biopsy 2. In histological finding, the blister caused by cupping therapy is made by dermo-epidermal seperation at subcellular level. Suction blistering was neither inflammatory nor autolysis activation of lysosomal hydrolases. 3. Blistering times directly, related to suction pressure. Suction blister formation time is accelerated in older subjects compared with younger individuals and higher temperature was more susceptable to the blister compared with lower temperature. The flexor aspect of forearm is a easy site for suction blister formation compared with leg and abdominal site. 4. Blister caused by cupping therapy is treated by regular and judicious changes of sterile dressing over several weeks. The vesicles healed well and left no visible scar. Conclusions : Blister caused by cupping therapy is artificially controlled by doctor's therapeutic purpose. Blister is not histologically injurious to health and the blister is a natural concomitant after cupping therapy.

• 간호행정학회지
• /
• 제2권2호
• /
• pp.5-16
• /
• 1996

The purpose of this study is to identify the handwashing knowledge and attitudes of resistered nurses on general wards. Subjects for this study include 182 nurses working in general wards of a hospital in Seoul area. Data were collected by a questionnaire from July 30 to August 10,1996. Statistical analyses were done by the SPSS/PC program. The techniques used in this sudy included frequencies, chi-square test. The results of this study are summarized as follows. 1. 34.6% of the respondents reported that they washed their hand an average of 5 to 7 times during the work day. 2. 38.5% of the respondents reported always washing after each patient contact. Only 9.9% always washed before contact with a patient. 3. 56.6% of the respondents reported a washing time of 10 to 20 seconds, whereas 29.1% washed 21 to 30 seconds. Chi-square tests were employed to determine any differences in handwashing frequency and duration by age, working years, work position. There were no satistically significant differences among the variables. 4. 95.6% of the subjects used water and plain soap during the washing process. The respondents washed the palms of the hands, the backs of their hands and between their fingers(33%). Only 17.6% removed rings before handwashing. Similarly, 11% removed their wristwatch. The majority(96.2%) reported that they used communal textile towel to dry their hands. When asked what method they used to turn off the water faucet after washing, 98.4% reported using direct hand-to-faucet contact. 5. Nursing activities that showed the highest handwashing rates was after wound dressing(22.9%), followed by suctioning(21.4%), injection(21.2%), inserting catheter(18%). 6. Reasons cited for reduced handwashing frequency included being too busy to wash more often(74.7%), no need to wash more often(11.0%) and dry skin caused by frequent handwashing(3.3%). 7. When asked where they obtained their current knowledge of handwashing techniques, they reported professors(73.6%), resisted nurses(14.8%) and supervisor(6.6%). 8. Nursing staff thought that proper handwashing was important factor in decreasing nosocomical infections(72.4%).

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.87-92
• /
• 2018

As gas turbines for power generation become increasingly more important for high capacity and high efficiency, the technological development and investment of companies are increasing globally. Gas turbine manufacturing technology is only owned by a few companies such as GE, Siemens, and MHI, and our country currently depends on imports of processing technology and component parts. The core part of the gas turbine is curvic coupling tooth processing technology that improves turbine efficiency by smoothly transmitting power to the turbine rotor. Curvic coupling tooth machining and evaluation research is restricted overseas, and it is not underway in Korea. Therefore, in this study, roughing and finishing process technology for curvic coupling tooth machining is developed and a quantitative evaluation method is proposed. For the development of machining technology, the analysis of critical parameters was performed through C & E analysis. In the roughing process, the conditions considering the minimum machining time and tool load ratio were determined. Finishing process conditions were determined based on the contact ratio between the tooth surfaces. The image-processing method is presented for evaluation of the contact ratio and a verification test was performed.