• Journal of the Optical Society of Korea
• /
• 제7권3호
• /
• pp.135-138
• /
• 2003

A chirped-pulse amplification femtosecond Ti:sapphire laser operating at 1 KHz has been developed. The laser system consisted of a long-cavity femtosecond oscillator, a four-pass grating pulse stretcher, two multi-pass amplifiers and a double-pass grating pulse compressor. Thermal lensing at the amplifiers was reduced by cooling Ti:sapphire crystals using Peltier coolers. Gain narrowing and residual phase errors were compensated for by the use of an acousto-optic pulse shaper. The final laser output had an energy per pulse of 2.0 mJ and a pulse duration of 19.5 fs, reaching 0.1 TW at 1 KHz.

• 대한전자공학회논문지
• /
• 제25권2호
• /
• pp.227-232
• /
• 1988

A semicustom VLSI design fo digital filters used in TDM/FDM transmultiplexer is described. A filter bank composed of only all-pass digital filter sections are implemented with the polyphase network. The use of all-pass filters as basic building blocks is shown to provide a trans-multiplexer structure that has low computational requirements, low quantization noise, and high modularity. The silicon compiler system is used to reduce the design time and to increase the credibility of designed filters. As a prototype, 1st and 2nd order all pass filter are designed, using CMOS N-well double metal technology. The chip sizes of first order filter and the second order filter are 2652 x 533\ulcorner\ulcorner 5334x4300\ulcorner\ulcorner respectively.

• 디지털산업정보학회논문지
• /
• 제7권4호
• /
• pp.81-88
• /
• 2011

Mini Double Gears Frame is critical part of PDP and also produces couple hundred thousand every month. In the process of mass production, product inspection is very important process. Double Gear, one of the part of machine, was inspected by human eyes which caused mistakes and slow progress. To achieve the speed and accuracy the system was compensated by vision system which is inspecting automatically. The focus value is measured based on the fact that high contrast images have much high frequency edge information. High frequency term of the image is extracted using the high-pass filter and the sum of the high frequency term is used as the focus value. We used a Gaussian smoothing filter to reduce the noise and then measures the focus value using the modified Laplacian filter called a Sum modified Laplacian Focus values for the various lens positions are calculated and the position with the maximum focus value is decided as the focused position. The focus values calculated in various lens position showed the Gaussian distribution. We proposed a method to estimate the best focus position using the Gaussian curve fitting. Focus values of the uniform interval lens positions are calculated and the values are used to estimate the Gaussian distribution parameters to find the best focus position.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.96-104
• /
• 2000

This paper represents to develop a computer software system which is capable to analyze the phase transformation of high strength steel(BV-AH32) and to predict heat transfer and welding residual stress due to phase transformation during Gas Metal Arc(GMA) welding. The developed model was considered temperature dependent properties such as young's modules, coefficient of thermal expansion and yield stress as well as the double ellipsoidal heat distribution by the moving arc. From the results, it was found that the longitudinal and transverse residual stresses calculated by the coupled analysis of heat transfer, residual stress and phase transformation showed good agreement with the experimental data. In addition, the temperature distribution as well as longitudinal and transverse residual stresses of weldment by the 1-pass and 2-pass of welding were also determined.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1999년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.310-313
• /
• 1999

This paper represents to develop a computer software system which is capable to analyze the phase transformation of high strength steel(BV-AH32) and to predict heat transfer, residual stress due to phase transformation during Gas Metal Arc(GMA) welding. The developed model was taken into account temperature dependent of young's modules, coefficient of thermal expansion and yield stress as well as the double ellipsoidal heat distribution by the moving arc. The results showed that the longitudinal and transverse residual stresses calculated by the coupled analysis of heat transfer, residual stress and phase transformation are in good agreement with the experimental data. In addition, the temperature distribution as well as longitudinal and transverse residual stresses of weldment were determined at the 1-pass and 2-pass of welding.

• 대한전자공학회논문지
• /
• 제24권3호
• /
• pp.413-419
• /
• 1987

In this paper, self-oscillating mixer is designed by small signal S-parameter and series feedback circuit. The input-output matching circuit is accomplished from double stub and additional matching stub. The self-oscillating mixer is oscillating itself and amplifies without any external local oscillator and an intermediate frequency amplifier, so it has advantages in its economical and system simplification. The experimental results show the maximum conversion gain 1.5d B and the noise figure 6.5d B at RF center frequency 4GHz and IF 1.1GHz` output oscillating power 4d Bm, efficiency 13.4%, stability -10MHz/V and -0.5MHz/\ulcornerC at oscillating frequency 5.1GHz.The rejection band loss characteristics in band pass filter and low pass filter are -40d B and -30d B, respectively.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2002년도 제10회 하계 Workshop
• /
• pp.1-12
• /
• 2002

Desalination by reverse osmosis (RO), which first entered commercial use in the 1970s, was initially mainly used for treating brackish water. Technological progress led to the development of an RO membrane enabling single-pass seawater desalination. Toyobo succeeded in developing a single-pass seawater desalination RO module composed of hollow fiber type membranes made of cellulose triacetate in 1978, and then in 1979 began production of the first commercially available double-element module. This double-element module has many advantages suitable for seawater desalination. It has high chlorine tolerance and high salt rejection, derived from the properties of the membrane material, and it is highly resistant to fouling and scaling matters due to the unique flow pattern and fiber bundle configuration. These advantages help to explain why the Toyobo double-element module has been used so successfully at the many seawater desalination plants around the world. Since the 1980s, large plants capable of desalinating several tens of thousands of cubic meters a day have sprung up around the Mediterranean and In the Middle East. The Jeddah RO Phase I Plant, which has a capacity of 56, 800m$^3$/day, went into operation in 1989. In 1994, the same sized Phase II Plant came on stream, giving the plant a huge total capacity of 113, 600m$^3$/day. The plant constructor Mitsubishi Heavy Industries, Ltd. (MHI), and the RO membrane manufacturer Toyobo Co., Ltd. In 1998, the world's largest RO seawater desalination plant in operation, which has a capacity of 128, 000m$^3$/day and is run by Saudi Arabia's Saline Water Conversion Corporation (SWCC), went into operation at Yanbu. RO seawater desalination technology has thus already reached the stage of full-scale commercial use. In order to encourage its wider use, however, RO desalination needs to be made more economical by lowering construction and water treatment costs. Toyobo has therefore developed a new economical RO desalination system by a recovery ratio of 60% using a high-pressure module with a high product flow rate. In 2000, Toyobo high recovery membrane module was selected for the largest seawater desalination plant in Japan, which has a capacity of 50, 000m$^3$/day.

• 인터넷정보학회논문지
• /
• 제12권1호
• /
• pp.71-83
• /
• 2011

국립대학 재정.회계법 제정 추진에 따라 국립대학은 발생주의.복식부기를 반영한 새로운 학교회계제도를 도입할 예정이며, 제도의 안정적 시행을 위해 새로운 학교회계제도에 따라 일괄적으로 처리할 수 있는 국립대학 재정.회계시스템 구축이 필요하다. 따라서 본 연구에서는 "국립대학 재정.회계법" 법안의 국회통과에 대비하여 기존 국립대학의 재정.회계시스템 운영 실태를 조사하여 문제점을 도출하고, 이를 근거로 국립대학 재정.회계시스템 구축 방안을 제언하였다. 본 연구 결과를 통해 제시된 제언들이 교육과학기술부, 국립대학에서 대학 재정의 투명성 제고와 신속한 경영정보를 제공하는 국립대학 재정.회계시스템 구축 사업의 기초 자료로 활용되기를 기대한다.

• 전자공학회논문지SC
• /
• 제46권1호
• /
• pp.43-48
• /
• 2009

광섬유 격자 센서어레이용 파장가변 광섬유 레이저의 출력파장변화를 복조할 수 있는 시스템을 제안하였다. 광섬유 레이저는 반도체 광증폭기와 Fabry-Perot 필터를 이용하여 제작하였고, 더블패스 마하젠더 간섭계 구조를 적용하여, $90^{\circ}$위상차를 가지는 내부 트리거를 생성하였다. 내부 트리거를 이용하여 얻은 Lissajous 그래프에 원형 피팅을 적용하여 2.51 mrad의 평균위상오차를 얻었다. 실험을 통하여 파장가변필터의 비선형 동작 특성에 의한 광섬유 레이저의 비선형 출력을 확인하였다. 제안한 파장검출 방법을 적용하면 파장가변광원의 비선형성을 보상하여 광섬유격자 센서시스템을 위한 효율적인 광원으로 적용이 가능할 것으로 예상된다.

• Earthquakes and Structures
• /
• 제18권3호
• /
• pp.297-312
• /
• 2020

The KiK-net by NIED is a vertical array measurement system. In the database of KiK-net, singular pulse waves were observed in the seismic record at the borehole of TTRH02 during the mainshock (the magnitude of Japan Meteorological Agency (M_J) 7.3, M_W 6.8) and aftershock (M_j 4.2) of Tottori-ken Seibu earthquake in 2000. Singular pulse waves were also detected in the seismic records at the borehole of IWTH25 during the Iwate-Miyagi Nairiku earthquake in 2008 (M_J 7.2, M_W 6.9). These pulse waves are investigated by using the wave shape analysis methods, e.g., the non-stationary Fourier spectra and the double integrated displacement profiles. Two types of vibration modes are discriminated as the occurrence mechanism of the singular pulse waves. One corresponds to the reversal points in the displacement profile with the amplitude from 10^-4 m to 10^-1 m, which is mainly related to the fault activity and the amplification pass including the mechanical amplification (collision) of the seismograph in the casing pipe. The other is the cyclic pulse waves in the interval of reversal points, which is estimated as the backlash of the seismograph itself with the amplitude from 10^-5 m to 10^-4 m.