• 한국광학회지
• /
• 제26권4호
• /
• pp.226-232
• /
• 2015

$8m{\times}6m$(400인치)의 대형 화면 액정 화상 투영기에 쓸 수 있는 광원부로서 엘이디를 2층으로 촘촘하게 배열한 광원과 그에 수반되는 조명광학계 설계의 개념을 제시하였다. 엘이디를 촘촘히 배열할 때 생기는 방열문제는 엘이디를 2층으로 배열하면 해결됨을 열분석을 통해 보였다. 뒤 층의 엘이디에서 나오는 빛이 앞 층에 가려질 수 있는 문제는 앞뒤로 어긋나게 배열하여 해결했고, 엘이디 배열에서 나온 빛을 투영렌즈에 맞추어 액정판을 고르게 비추는 조명광학계를 함께 설계하였다.

• 마이크로전자및패키징학회지
• /
• 제18권1호
• /
• pp.23-27
• /
• 2011

전기화학적 에칭을 이용한 다공성 실리콘 이중층 형성은 초박형 태양전지 제작에서 PS layer transfer 기술을 적용하기 위한 선행 공정이다. 다공성 실리콘 층의 다공도는 전류밀도와 에칭용액 내 불산의 농도를 조절하여 제어할 수 있다. 전기화학적 에칭을 이용한 다공성 실리콘 형성을 위하여 비저항 $0.01-0.02\;{\Omega}{\cdot}cm$의 p-type (100)의 실리콘 웨이퍼를 사용하였으며, 에칭용액의 조성은 HF (40%) : $C_2H_5OH$(99 %) : $H_2O$ = 1 : 1 : 2 (volume)으로 고정하였다. PS layer transfer 기술에 사용되는 다공성 실리콘 이중층을 형성하기 위해서 에칭 도중 전류밀도를 낮은 전류밀도 조건에서 높은 전류밀도 조건으로 변환하여 low porosity layer 하부에 high porosity layer를 형성할 수 있다.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.99-102
• /
• 2009

We report our development of the fabrication process of sub-micron scale $Al-AlO_x-Al$ tunnel junction by using electron-beam lithography and double-angle shadow evaporation technique. We used double-layer resist to construct a suspended bridge structure, and double-angle electron-beam evaporation to form a sub-micron scale overlapped junction. We adopted an e-beam insensitive resist as a bottom sacrificing layer. Tunnel barrier was formed by oxidation of the bottom aluminum layer between the bottom and top electrode deposition, which was done in a separate load-lock chamber. The junction resistance is designed and controlled to be 50 $\Omega$ to match the impedance of the transmission line. The junctions will be used in the broadband shot noise thermometry experiment, which will serve as a link between the electrical unit and the thermodynamic unit.

• 전자공학회논문지D
• /
• 제35D권6호
• /
• pp.46-53
• /
• 1998

저온 공정으로 제작되는 다결정 실리콘 박막 트랜지스터의 활성층을 이중 활성층(a-Si/a-SiN/sub x/)으로 제작하는 공정을 제안하고 다결정 실리콘 박막 트랜지스터를 제작하였다. 본 논문에서는 활성층의 아래쪽 실리콘 박막에 약간의 질소기를 첨가한 후 그 위에 순수한 비정질 실리콘 박막을 증착하여 엑시머 레이저의 에너지로 비정질 실리콘 박막을 결정화하여 사용하였다. 이중 활성층 (a-Si/a-SiN/sub x/)의 경우, 하부층의 NH₃/SiH₄ 유속비가 증가함에 따라, 상부 a-Si 층의 결정 성장이 촉진됨을 알 수 있었으나, n/sup +/ poly-SiN/sub x/ 층의 전도도 특성을 고려해 볼 때, NH₃/SiH₄ 유속비는 0.11의 상한치를 가짐을 알 수 있었다. 전계 방출 전류에 영향을 미치는 광학적 밴드갭의 경우, poly-Si 박막에 비해 증가하였으며, NH₃/SiH₄ 유속비가 0.11 이하에서도 0.1eV 정도의 증가를 보여, 이로 인하여 소자 제작시 전계 방출 전류가 억제될 것을 예상할 수 있다.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.721-726
• /
• 2023

본 논문에서는 접지된 2중 유전체층 사이의 도체띠 격자구조에 의한 TM(tranverse magnetic) 전자파 산란 문제를 전자파 수치해석방법으로 알려진 FGMM(fourier galerkin moment method)과 PMM(point matching method)을 적용하여 해석하였다. 경계조건들은 미지의 계수를 구하기 위하여 이용하였다. 접지된 2중 유전층의 비유전율과 두께는 동일한 값에 대해서만 취급하였으며, 유전체층의 두께와 비유전율의 값이 증가하면 전반적으로 반사전력은 증가하였으며, 반사전력의 최소값들이 스트립 폭이 증가하는 방향으로 이동하였다. 본 논문의 제안된 구조에 대해 FGMM과 PMM의 수치해석 방법을 적용한 수치결과들은 매우 잘 일치하였다.

• Journal of Periodontal and Implant Science
• /
• 제47권6호
• /
• pp.372-380
• /
• 2017

Purpose: The aim of this prospective pilot study was to compare alveolar ridge preservation (ARP) procedures with open-healing approach using a single-layer and a double-layer coverage with collagen membranes using radiographic and clinical analyses. Methods: Eleven molars from 9 healthy patients requiring extraction of the maxillary or mandibular posterior teeth were included and allocated into 2 groups. After tooth extraction, deproteinized bovine bone mineral mixed with 10% collagen was grafted into the socket and covered either with a double-layer of resorbable non-cross-linked collagen membranes (DL group, n=6) or with a single-layer (SL group, n=5). Primary closure was not obtained. Cone-beam computed tomography images were taken immediately after the ARP procedure and after a healing period of 4 months before implant placement. Radiographic measurements were made of the width and height changes of the alveolar ridge. Results: All sites healed without any complications, and dental implants were placed at all operated sites with acceptable initial stability. The measurements showed that the reductions in width at the level 1 mm apical from the alveolar crest (including the bone graft) were $-1.7{\pm}0.5mm$ in the SL group and $-1.8{\pm}0.4mm$ in the DL group, and the horizontal changes in the other areas were also similar in the DL and SL groups. The reductions in height were also comparable between groups. Conclusions: Within the limitations of this study, single-layer and double-layer coverage with collagen membranes after ARP failed to show substantial differences in the preservation of horizontal or vertical dimensions or in clinical healing. Thus, both approaches seem to be suitable for open-healing ridge preservation procedures.

• Tribology and Lubricants
• /
• 제19권1호
• /
• pp.9-14
• /
• 2003

The sealing performance of an elastomeric O-ring using the double layered material has been analyzed fer the contact stress behaviors that develop between the O-ring seal and the surfaces with which it comes into contact. The leakage of an O-ring will occur when the pressure differential across the seal Just exceeds the initial (or static) peak contact stress. The contact stress behaviors that develop in compressed O-rings, in common case of dovetail grooved geometry, are investigated using the finite element method. The FE analysis includes material hyperelasticity and axisymmetry. The computed FEM results show that the contact stress behaviors are related to the ratio of diameter between the inner ring and the outer ring, and the temperature of vacuum chamber.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.71-72
• /
• 2010

The study is compared temperature history and strength of concrete followed by covering method of insulation curing of cold weather concrete with double bubble sheet. The results were as follows. First of all, in temperature history of concrete, the internal temperature of concrete fell down to $0^{\circ}C$ before/after 60 hours, having nothing to do with covering method. The study could see that, when sheet was isolated, it fell down to low temperature quickly in early curing. When the study measured compressive strength of core specimen, there were no large differences among placing methods. However, compressive strength fell down in all ages when sheet was isolated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.30-33
• /
• 2008

Using a $Ir(ppy)_3$ doped in hole and electron transport host materials, simple three layers green PHOLEDs comprising double emissive layers have been fabricated. A low driving voltage value of 3.3 V to reach a luminance of $1000\;cd/m^2$ and maximum current- and power-efficiency values of 53.9 cd/A and 57.8 lm/W are demonstrated in this simple structure phosphorescent OLED.

• Structural Engineering and Mechanics
• /
• 제54권5호
• /
• pp.987-998
• /
• 2015

In this paper, free vibrations of a clamped-clamped double-walled carbon nanotube (DWNT) under axial force is studied. By utilizing Euler-Bernoulli beam theory, each layer of DWNT is modeled as a beam. In this analysis, nonlinear form of interlayer van der Waals (vdW) forces and nonlinearities aroused from mid-plane stretching are also considered in the equations of motion. Further, direct application of multiple scales perturbation method is utilized to solve the obtained equations and to analyze free vibrations of the DWNT. Therefore, analytical expressions are found for vibrations of each layer. Linear and nonlinear natural frequencies of the system and vibration amplitude ratios of inner to outer layers are also obtained. Finally, the results are compared with the results obtained by Galerkin method.