• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.177-179
• /
• 2012

This work presents an experimental investigation to study $NO_x$ emissions under stoichiometric air ratio and elevated pressure (2~10bar) in a High Press Combustor(HPC) equiped with double cone burner which was designed by Pusan Clean Coal Center(PC3). Exaust gas temperature and $NO_x$ emissions were measured at the end of the combustion chamber. The $OH^*$ radical concentration and $NO_x$ emission were decreased as a function of increasing ${\lambda}$ generally. On the other hand, $OH^*$ radical concentration and $NO_x$ emission increased with ${\lambda}$ pressure of the combustion chamber. $NO_x$ emissions which were governed by thermal $NO_x$, were highly increased under the elevated pressure, but slightly increased at sufficiently low fuel concentrations (${\lambda}>2.0$).

• 한국어류학회지
• /
• 제29권3호
• /
• pp.218-223
• /
• 2017

한국산 담수어류 버들붕어의 눈을 관찰하고 시각을 담당하는 망막의 시각세포 구조를 광학현미경과 주사전자현미경을 이용하여 조사하였다. 버들붕어는 구형의 수정체를 보유하고 있었으며, 각막은 노란색으로 확인하였다. 눈은 $3.5{\pm}0.2mm$의 크기였으며 두장/안경비는 $31.1{\pm}5.0$으로 비교적 큰 눈을 가지고 있었다. 버들붕어의 망막은 $158.2{\pm}10.6{\mu}m$의 두께였으며 시각세포층에는 간상세포 ($57.3{\pm}1.3$), 동형 이중원추세포($33.9{\pm}3.7$) 및 단일원추세포($27.8{\pm}1.6$)로 구성되어 있었으며 횡단면을 확인한 결과 정방형의 모자이크 모델을 보유하고 있었다. 모든 시각세포는 내절과 외절의 구분이 뚜렷하였으며 간상세포가 원추세포보다 더 길어 원추세포들의 외절과 외절사이에 간상세포의 내절이 존재하였다. 간상세포의 외절은 망막 색소상피층 아래까지 신장되어 있었다. 전자현미경을 통해 미세구조를 확인한 결과 원추세포와 간상세포 모두 내절과 외절을 연결하는 배상극이 관찰되었으며 간상세포 및 동형 이중원추세포의 형태가 뚜렷하게 구분되었다. 시각세포의 횡단면을 관찰한 결과 짧은 단일원추세포를 기준으로 상하좌우에 동형 이중원추세포가 정방형 배열을 하고 있었다.

• 제어로봇시스템학회논문지
• /
• 제15권10호
• /
• pp.1002-1008
• /
• 2009

We consider a double faults detection and isolation problem using modified extended parity space approach for inertial measurement unit which use redundant inertial sensors. A redundant IMU which has a hardware redundant is composed of the cone shape because it is good for fault detection and isolation. We analyze the type of double faults and the reason why fault isolation performance is low. We propose modified extended parity space approach method using EPSA and the difference of sensor data.

• 설비공학논문집
• /
• 제24권6호
• /
• pp.515-520
• /
• 2012

A daylighting system includes three parts; light collector, light transformer and light distributor. A DBLP(Double blind light pipe) daylighting system consists of a double blind light collector, a mirror duct type light transformer and a prism film light pipe distributor. The double blinds for a light collection are used to track the sun's altitude and azimuth movements throughout the day. Behind both sets of blinds is the light transformer, which is based on a rectangular cone shaped light duct. The light transformer was designed to efficiently deliver the light into the light pipe within a 30 degree radial spread for the efficient light into the distributor. In this study, DBLP system efficiency was simulated, evaluated and optimized by Tracepro as a popular ray trace light design simulation program. The results indicated that DBLP system efficiency evaluated a maximum 22.4% in case of Spring/Fall season solar noon time. While the overall average system efficiency in the morning and afternoon is evaluated about 10%.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.133-135
• /
• 2012

This study presents the prediction of NOx and mixing characteristics with several chemical reaction mechanisms of methane in EV burner of double cone. Experimental results are compared with numerical results for validation. Mixing characteristics are analyzed at monitoring points based on the modified unmixedness. The mixing characteristics were improved in a certain case, the lance injection case. In 1-step reaction case, inside of the cone, flame was formed and lots of NOx was generated because the fuel injected from the lance was overestimated. In 2-step reaction case, numerical results showed a good agreement with experimental results in a qualitative manner.

• 천문학회지
• /
• 제53권2호
• /
• pp.35-42
• /
• 2020

We analyze high dispersion emission lines of the symbiotic nova AG Pegasi, observed in 1998, 2001, and 2002. The Hα and Hβ lines show three components, two narrow and one underlying broad line components, but most other lines, such as H_I, He_I, and He_II lines, show two blue- and red-shifted components only. A recent study by Lee & Hyung (2018) suggested that the double Gaussian lines emitted from a bipolar conical shell are likely to form Raman scattering lines observed in 1998. In this study, we show that the bipolar cone with an opening angle of 74°, which expands at a velocity of 70 km s^-1 along the polar axis of the white dwarf, can accommodate the observed double line profiles in 1998, 2001, and 2002. We conclude that the emission zone of the bipolar conical shell, which formed along the bipolar axis of the white dwarf due to the collimation by the accretion disk, is responsible for the double Gaussian profiles.

• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.251-257
• /
• 2012

본 연구에서는 이중원추형 버너가 장착된 고압연소기를 이용하여 입구공기온도, 공기비 그리고 연소실 압력조건에 따른 NOx 배출 특성을 실험적으로 조사하였다. 배기가스 온도와 NOx 배출량은 동일한 연소실 끝단지점에서 측정되었다. NOx 배출량은 공기비가 증가함에 따라 감소하는 경향을 나타내었으며, 입구공기 온도와 연소실의 압력이 높아질수록 증가하는 경향을 나타내었다. 특히 입구공기 온도의 증가는 희박 영역에서 가연한계를 증가시켜 높은 단열화염 온도를 가짐에도 불고하고 저감된 NOx 배출 수준을 얻을 수 있었다. 연소실 압력이 증가할수록 Thermal NOx의 영향을 받는 영역에서의 NOx 배출은 큰 폭의 상승을 보였으나, 공기비가 1.8이상인 영역에서는 적은 연료량으로 인하여 적은 상승폭을 나타내었다.

• 한국가스학회지
• /
• 제25권6호
• /
• pp.22-28
• /
• 2021

발전용 가스터빈에 사용되는 이중 콘형 예혼합 연소기의 성능 개선 및 검증을 위하여 기존 노즐에서 연료 분사 특성을 개선한 노즐(분사구 직경 증가, 분사구 수 감소, 총 분사면적 유지)을 이용하여 고압 및 다중화염 조건에서 실험 연구를 수행하였으며 배기가스 특성을 기존 노즐과 비교하였다. 실험 결과로는 노즐의 연료 직경을 크게 한 경우 연소용 공기로 연료의 침투 거리가 증가하기 때문에 콘 내부에서 연료와 공기의 혼합특성이 개선되어 상압뿐만 아니라 압력 상승 시 NOx 배출 농도는 감소하며 다중 화염의 경우 화염간 연소영역의 중첩이 감소하게 되어 NOx 배출은 감소하지만 화염 안정성은 저하된다. 연료 분사구를 개선한 노즐의 발전 플랜트 실증 결과는 실험 결과와 같이 기존 노즐에 비하여 NOx 농도가 낮게 배출되었다.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.9-16
• /
• 1998

The nput impedance of a patch-tupe dipole antenna for GPR is calculated by using the moment methods in case that the surrounding medium is modeled on a multi-layer structure consisting of lossy dielectircs. When the cone-type function equivalent to pulse basis function in employed, one of the double integration can be performed analytically. The remaining integration is excuted numerically in a finite rnage and analytically in asymptotic region. The current distributions and input impedances of those antennas are calculated numerically.

• Journal of Periodontal and Implant Science
• /
• 제47권6호
• /
• pp.372-380
• /
• 2017

Purpose: The aim of this prospective pilot study was to compare alveolar ridge preservation (ARP) procedures with open-healing approach using a single-layer and a double-layer coverage with collagen membranes using radiographic and clinical analyses. Methods: Eleven molars from 9 healthy patients requiring extraction of the maxillary or mandibular posterior teeth were included and allocated into 2 groups. After tooth extraction, deproteinized bovine bone mineral mixed with 10% collagen was grafted into the socket and covered either with a double-layer of resorbable non-cross-linked collagen membranes (DL group, n=6) or with a single-layer (SL group, n=5). Primary closure was not obtained. Cone-beam computed tomography images were taken immediately after the ARP procedure and after a healing period of 4 months before implant placement. Radiographic measurements were made of the width and height changes of the alveolar ridge. Results: All sites healed without any complications, and dental implants were placed at all operated sites with acceptable initial stability. The measurements showed that the reductions in width at the level 1 mm apical from the alveolar crest (including the bone graft) were $-1.7{\pm}0.5mm$ in the SL group and $-1.8{\pm}0.4mm$ in the DL group, and the horizontal changes in the other areas were also similar in the DL and SL groups. The reductions in height were also comparable between groups. Conclusions: Within the limitations of this study, single-layer and double-layer coverage with collagen membranes after ARP failed to show substantial differences in the preservation of horizontal or vertical dimensions or in clinical healing. Thus, both approaches seem to be suitable for open-healing ridge preservation procedures.