• 제목/요약/키워드: Double stage aging

검색결과 5건 처리시간 0.021초

Cu-1.6Co-0.38Si 합금의 열처리에 따른 경도 및 전기전도도의 변화 (Hardness and Electrical Conductivity Changes according to Heat Treatment of Cu-1.6Co-0.38Si Alloy)

  • 곽원신;이시담
    • 열처리공학회지
    • /
    • 제33권5호
    • /
    • pp.226-231
    • /
    • 2020
  • The Cu-Co-Si alloy shows high strength by forming precipitates by aging precipitation heat treatment of supersaturated solid solution treated with solution treatment such as Cu-Ni-Si alloy, and the Co2Si precipitated phase is dispersed in the copper matrix. The effect of aging treatment on the microstructure, mechanical and electrical properties of Cu-Co-Si alloys for electronic devices was investigated. As a results of SEM/EDS analysis, it was found that Co2Si precipitates of 30~300 nm size were distributed in grains. By performing the double aging treatment, it was possible to improve the strength and electrical conductivity by dispersing the fine precipitate evenly.

Dynamic strain aging 에 의한 국소변형의 perturbation analysis (Perturbation analysis of localized deformation by dynamic strain aging)

  • 양승용
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2003년도 춘계학술대회
    • /
    • pp.96-100
    • /
    • 2003
  • In the tensile loading of sheet metals made from polycrystalline aluminum alloys, a single deformation band appears inclined to the elongation axis in the early stage of plastic deformation, and symmetric double bands are observed in the later stage. This character of the localized deformation bands has been analyzed by a perturbation method. Macroscopic slip modes composed of slip planes and slip directions were assumed to describe the tensile and shear strains. Along time integration path, the value of the perturbation growth parameter was checked to find at which angle to the elongation axis the localized deformation bands are generated. It was shown that the mode of the localized deformation is related to asymmetry of material property.

  • PDF

강정 반데기 건조방법에 관한 연구 (Studies on the Drying Methods of Gangjung Pellets)

  • 이승아;김창순;김혁일
    • 한국식품조리과학회지
    • /
    • 제16권1호
    • /
    • pp.47-56
    • /
    • 2000
  • 강정 반데기의 건조방법 개선과 건조시간을 단축하고자 열풍건조기와 원적외선건조기를 이용하여 건조 후 강정 반데기의 최적 수분함량을 결정하고 건조방법, 건조온도, 숙성유무 등의 건조조건을 달리하여 강정을 제조하였으며, 그에 따른 강정의 품질 특성을 물리적, 관능적 검사를 통하여 살펴보았다. 강정 반데기의 최적 수분함량은 17%로 나타났고 수분함량이 낮을수록 팽화도가 감소하고 조직감이 나빠지는 경향을 보였으며, 또한 강정 반데기의 균열이 많이 나타났다. 열풍건조에 비해 원적외선건조에 의해 20%정도의 건조시간 단축이 가능하였으며, 원적외선건조가 후반부의 가열효과가 큰 것을 알 수 있었다. 열풍건조와 원적외선건조 모두 최저 풍속 0.4 m/s에서 팽화도와 조직감이 양호한 경향을 보여 풍속이 낮을수록 강정의 품질이 우수하였다. 4$0^{\circ}C$에서 건조한 강정 반데기로 튀긴 강정이 다른 온도에서 보다 높은 팽화도와 부드럽고 아삭아삭한 조직감을 나타내었고, 1차 숙성한 것과 숙성하지 않은 것 중 숙성하지 않은 것이 품질 및 시간 단축 면에서 양호하게 나타났으며, 또한 열풍건조보다 원적외선건조를 이용한 강정이 낮은 경도와 높은 brittleness를 나타내었고 시간 단축 효과도 나타났다. 관능검사 결과 열풍건조와 원적외선건조 모두 건조온도가 높을수록 경도는 증가하였고, 아삭아삭한 정도는 열풍건조에서는 6$0^{\circ}C$가 가장 높았으며, 원적외선에서는 유의적인 차이가 없었으며 대체적으로 높은 온도에서 강정 반데기를 건조시키면 단단하고 덜 아삭아삭한 강정 품질을 나타내었다. 강정의 미세구조 관찰에 있어서 유의적인 차이는 없으나, 4$0^{\circ}C$ 건조온도에서 원적외선건조를 이용한 경우 강정 내부의 기공 수가 가장 많았고, 기공의 둘레 및 면적이 적게 나타나 미세하고 균일한 기공을 가진 강정 내부 구조를 나타내었다. 따라서 열풍건조와 원적외선 건조를 이용하여 강정 제조시 강정 반데기의 최적 수분 함량은 17%였으며, 최적의 건조온도는 4$0^{\circ}C$로 나타났다. 특히 원적외선건조를 이용하여 숙성하지 않고 4$0^{\circ}C$에서 강정 반데기를 건조시켜 제조한 강정의 품질이 가장 우수하였으므로 최적의 건조조건이라 할 수 있다.

  • PDF

Compressed Demographic Transition and Economic Growth in the Latecomer

  • Inyong Shin;Hyunho Kim
    • 분석과 대안
    • /
    • 제7권2호
    • /
    • pp.35-77
    • /
    • 2023
  • This study aims to solve the entangled loop between demographic transition (DT) and economic growth by analyzing cross-country data. We undertake a national-level group analysis to verify the compressed transition of demographic variables over time. Assuming that the LA (latecomer advantage) on DT over time exists, we verify that the DT of the latecomer is compressed by providing a formal proof of LA on DT over income. As a DT has the double-kinked functions of income, we check them in multiple aspects: early maturation, leftward threshold, and steeper descent under a contour map and econometric methods. We find that the developing countries (the latecomer) have speedy DT (CDT, compressed DT) as well as speedy income such that DT of the latecomers starts at lower levels of income, lasts for a shorter period, and finishes at the earlier stage of economic development compared to that of developed countries (the early mover). To check the balance of DT, we classify countries into four groups of DT---balanced, slow, unilateral, and rapid transition countries. We identify that the main causes of rapid transition are due to the strong family planning programs of the government. Finally, we check the effect of latecomer's CDT on economic growth inversely: we undertake the simulation of the CDT effect on economic growth and the aging process for the latecomer. A worrying result is that the CDT of the latecomer shows a sharp upturn of the working-age population, followed by a sharp downturn in a short period. Compared to early-mover countries, the latecomer countries cannot buy more time to accommodate the workable population for the period of demographic bonus and prepare their aging societies for demographic onus. Thus, we conclude that CDT is not necessarily advantageous to developing countries. These outcomes of the latecomer's CDT can be re-interpreted as follows. Developing countries need power sources to pump up economic development, such as the following production factors: labor, physical and financial capital, and economic systems. As for labor, the properties of early maturation and leftward thresholds on DTs of the latecomer mean that demographic movement occurs at an unusually early stage of economic development; this is similar to a plane that leaks fuel before or just before take-off, with the result that it no longer flies higher or farther. What is worse, the property of steeper descent represents the falling speed of a plane so that it cannot be sustained at higher levels, and then plummets to all-time lows.

강동구 도시 녹지축 기능 활성화를 위한 도시공원의 생태적 리뉴얼 방안 연구 (Ecological Renewal Plan of Urban Parks for the Revitalization of Urban Green Axis in Gangdong-Gu)

  • 박정아;한봉호;곽정인
    • 한국조경학회지
    • /
    • 제51권2호
    • /
    • pp.12-27
    • /
    • 2023
  • 본 연구는 강동구의 조성형공원 중 도시 녹지축에 입지한 환경생태적인 가치가 높은 공원을 대상으로 도시공원의 생태적 리뉴얼 조성방안을 마련하고 이를 적용한 설계를 제안하였다. 강동구의 개황과 도시공원 개황을 분석하고 강동구의 토지이용 및 녹지율, 공원녹지, 녹지축 현황을 분석하여 리뉴얼 대상지를 선정하였다. 강동구의 조성형 공원은 근린공원 2개소, 어린이공원 52개소로 총 54개소였으며 현황검토 1단계에서는 공원이 자연축, 녹지축상에 입지 및 인접 여부 등 입지적 가치 분석을 통해 17개소를 추출하였고, 2단계에서는 각 공원 서비스권역 내 녹지 및 오픈스페이스 비율을 바탕으로 1단계 추출 공원 중 8개소를 선정하였다. 3단계에서는 공원면적의 법적 기준 충족 여부를 통해 2단계 추출공원 중 2개소를 선정하였으며, 4단계에서는 공원의 노후화 조사를 통해 3단계 추출 공원 중 1개소를 선정하였다. 리뉴얼 대상지의 도시생태적 현황은 엔트로피 저감 측면의 토지이용현황, 물순환 측면의 토양피복현황, 생물다양성 측면의 식재구조현황을 조사하였다. 리뉴얼 대상지 3곳의 현황분석 결과는 녹지면적은 18.3-45.3%로 부족하였고 시설지 면적은 54.7%-81.7%로 높아 도시온도 저감효과가 낮은 것으로 판단되었으며, 불투수포장 면적이 공원 면적의 34.5%-48.9%로 시설면적의 대부분을 차지하여 물순환 기능이 부족한 것으로 판단되었다. 식재구조는 단층과 복층구조로 이루어져 있고 교목층은 양호하였으나 하부식생이 빈약하였고 식이식물이나 대경목 식재지는 없어 생물다양성이 낮은 상태였다. 본 연구에서 리뉴얼 대상지로 선정한 선린어린이공원, 당말어린이공원, 샘물어린이공원을 생태적으로 리뉴얼 설계한 후 공원별 생태면적률은 리뉴얼 전보다 1.4-3배 이상 증가하였다. 도시 녹지축에 입지한 도시공원을 도시생태계의 관점으로 바라보고 이를 생태적으로 리뉴얼하면 도시생태계 측면에서 엔트로피 저감, 물순환 건강성 향상, 생물다양성 기반조성에 기대효과가 높을 것으로 판단된다.