• Structural Engineering and Mechanics
• /
• 제28권2호
• /
• pp.239-257
• /
• 2008

Double-sided punched metal plate timber fasteners present projections on both sides, which offer improved joint fire resistance and better joint aesthetics. In this paper, 3-D nonlinear finite element models were developed to simulate double-sided nail plate fastener timber joints. The models, incorporating orthotropic elasticity, Hill's yield criterion and elasto-plasticity and contact algorithms, are capable of simulating complex contact between the tooth and the timber and between the base plate and the timber in a fastener. Using validated models, parametric studies of the double-sided nail plate joints was undertaken to cover the tooth length and the tooth width. Optimal configuration was assumed to have been attained when increase in nail plate tooth width did not result in a raise in joint capacity, in conjunction with the optimum tooth length. This paper presents the first attempt to model and optimise tooth profile of double-sided nail plate fastener timber joints, which offers rational designs of such fasteners.

• 한국인쇄학회지
• /
• 제29권3호
• /
• pp.125-132
• /
• 2011

Is very simple in tension work of screen mesh for effective printing if worker uses screen mesh of player who desire at screen print process. General method is methods that use mesh of player who want on screen frame as screen plate because tensioned. The single layer screen plate was made from one sheet screen mesh and the double layer screen plate was made from two sheets screen mesh overlapped. The thickness of sensitive emulsion applied to double layer screen plate is more thicker than two time s of thickness of emulsion applied to single layer screen plate. It seems that the sensitive emulsion inserted between an upper layer and a lower layer of double layer screen mesh.

• 한국인쇄학회지
• /
• 제28권2호
• /
• pp.57-67
• /
• 2010

The double layer screen plate tensioned with two sheets screen mesh is more thicker than that of one screen sheet. The double layer screen plate piled up with two sheets screen 200# or overlapped with a sheet screen 110# and a sheet screen 305# is more thicker than single layer screen plate with one sheet screen 420#. As the screen plate composed of two sheets screen has more accumulated ink capacity than one sheet of screen, printing printed with it has a good plasticity. And the single layer screen plate that accumulate a small quantity of ink has an excellent representation than the double layer screen plate but lower plasticity.

• 소음진동
• /
• 제6권6호
• /
• pp.771-779
• /
• 1996

In this paper, double Fourier sine series is used as a modal displacement functions of a rectangular plate and applied to the free vibration analysis of a rectangular plate under various boundary conditions. The method of stationary potential energy is used to obtain the modal displacements of a plate. To enhance the flexibility of the double Fourier sine series, Lagrangian multipliers are utilized to match the geometric boundary conditions, and Stokes' transformation is used to handle the displacements that are not satisfied by the double Fourier sine series. The frequency parameters and mode shapes obtained by the present method are compared with those obtained by MSC/NASTRAN and other analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1186-1190
• /
• 2003

In this paper, a valveless bubble-actuated fluid micropump was has been developed and its performance was tested. The valveless micropump consists of the lower plate, the middle plate, the upper plate and a resistive heater. The lower plate includes the nozzle-diffuser elements and the double-chamber. Nozzle-diffuser elements and a double-chamber are fabricated on the silicon wafer by the DRIE(Deep Reactive Ion Etching) process. The lower plate also has inlet/outlet channels for fluid flow. The middle plate is made of glass and plays the role of the diaphragm. The chamber in the upper plate is filled with deionized water, and which contacts with the resistive heater. The resistive heater is patterned on a silicon substrate by Ti/Pt sputtering. Three plates and the resister heater are laminated by the aligner and bonded in the anodic bonder. Since the bubble is evaporated and condensed periodically in the chamber, the fluid flows from inlet to outlet with respect to the diffusion effect. In order to avoid backflow, the double chamber system is introduced. Analytical and experimental results show the validity of the developed double-chamber micropump.

• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.125-131
• /
• 2018

A precision tribometer consisting of a cantilever was designed to measure frictional forces in the micro-Newton range. As frictional forces are measured based on the bending of the cantilever, vibration of the cantilever is the most significant factor affecting the quality of the friction measurement. Therefore, improved design of the tribometer with double cantilevers and a connecting plate that united the two cantilevers mechanically was suggested. For the verification of the modified design of the tribometer, numerical analysis and experiments were conducted. Examination using the finite element method revealed that the tribometer with a double cantilever and a connecting plate exhibited faster damping characteristics than the tribometer with a single cantilever. In the experiment, effectiveness of the double cantilever and connecting plate for vibration reduction was also confirmed. Vibration of the tribometer with double cantilever decreased eight times faster than that of the tribometer with a single cantilever. The faster damping of the double cantilever design is attributed to the mechanical interaction at the contacting surfaces between the cantilever and the connecting plate. Tribotesting using the tribometer with a single cantilever resulted in random fluctuation of frictional forces due to the stick-slip behavior. However, using the tribometer with a double cantilever and connecting plate for the tribotest gave relatively uniform and steady measurement of frictional forces. Increased stiffness owing to using a double cantilever and mechanical damping of the connecting plate were responsible for the stable friction signal.

• 한국음향학회지
• /
• 제18권7호
• /
• pp.39-44
• /
• 1999

직사각형 평판의 고유진동수와 진동모드를 연구하였다. 이중 퓨리에 사인시리즈를 직사각형 평판의 모달 변위함수로 사용하였으며, 다양한 경계조건을 가지는 자유진동 해석에 적용하였다. 유한급수 전개로써 근사해를 나타내는 고전적인 Ritz 방법을 이용해서 직사각형 평판의 고유진동수를 해석한 Leissa의 결과와 본 연구의 결과를 비교하였다. 그리고, 평판의 형상비에 따른 영향도 연구하였다. 자유경계 평판, 외팔평판, 고정평판, 그리고 모서리가 단순지지된 직사각형 평판의 진동형태를 가시화 하였다.

• 동력기계공학회지
• /
• 제16권6호
• /
• pp.24-29
• /
• 2012

In this study, the numerical simulation has been performed to investigate the hydrodynamic evaluation between double plate steel rudder and newly designed foil type rudder for small fishing boat. The simulations are carried out in 2 speed ranges with 7 variations of flow's angle of attack which is at intervals of about 5 degree respectively. As the well-known commercial code, FLUENT and CATIA are used as the solver. The simulation results show that new designed foil type rudder is better than conventional double plate rudder in terms of Lift and Drag of running boat in the water.

• Clinics in Shoulder and Elbow
• /
• 제18권3호
• /
• pp.162-166
• /
• 2015

Clavicle medial end fracture is rare, and it has not been studied extensively. Although there is debate regarding its treatment methods, because of the complications of conservative treatment, surgical treatment has been considered more than conservative treatment. This study describes a surgical method using double-plate fixation for treatment of clavicle medial end fractures in which plates were used on each anterior and superior border according to the anatomical structure of the clavicle. In addition, we report operative results of three patients treated by double-plate fixation.

• 한국전자파학회논문지
• /
• 제27권2호
• /
• pp.101-107
• /
• 2016

본 논문에서는 UWB 통신 시스템에 사용할 수 있는 소형 입체형 구조인 이중 원추형의 광대역 안테나를 검토하였다. 이중 원추형 광대역 안테나의 반경, 높이, 단락판의 개수 등의 안테나 구조 변화에 따른 반사손실 특성을 FDTD 법을 사용하여 계산하였다. 그 결과, 안테나의 구조 변화에 따른 광대역 안테나의 최적 구조가 있음을 확인할 수 있었으며, 최적 구조에서 안테나의 방사 지향성은 다이폴 안테나와 유사한 8자형 방사지향성 패턴을 나타내고 있었다. 반사손실의 측정 결과를 이론 계산치와 비교하여 이론 해석의 타당성도 검토하였다.