• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.332-335
• /
• 1998

An alternating copolymer of PPV and PTV, poly[2-methoxy-5-(3,7-dimethyl)octyloxy-1,4-phenylenevinylene-alt-2,5-thienylenevinylene] (DAPPV-PTV) has been synthesized and light-emitting properties of the polymer have been studied. A single layer EL device using DAPPV-PTV as an emitting layer between ITO and Al electrodes (ITO/DAPPV-PTV/Al) has been fabricated, and light emission of the device becomes visible at 3 V. The EL emission maximum of the device is about 620 nm. Double layer EL device using DAPPV-PTV and Alq3 (ITO/DAPPV-PTV/Alq3/Al) has also been fabricated. The double layer EL device shows two-color emission depending on the applied voltage. The device emits a pale green color from 8 V, and then the color turns to red at about 18 V.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.370-376
• /
• 2014

We optimized the design of the flat encapsulant of a light-emitting diode (LED) package to obtain higher light output power (LOP), both by experiment and simulation using three-dimensional ray-tracing software. In the experiment, the refractive index of the encapsulant was varied (1.41 and 1.53). In addition, double-layer structures with these refractive indices (1.41/1.53) were investigated by varying the shape of the interface between the two among flat, concave, and convex. The experiments showed that the LOP of the double-layer encapsulant with convex interface increased by 13.4% compared to the single-layer encapsulant with a refractive index 1.41, which was explained by the increase of the light extraction efficiency (LEE) in connection with the increase of the critical angle (${\theta}_c$) and the decrease of the Fresnel reflection.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.2
• /
• pp.23-28
• /
• 2008

To improve the external quantum efficiency by means of the optimization of the polymer light emitting diodes(PLEDs) structure, the PLED with ITO/PEDOT:PSS/(PFO)/PFO:MEH-PPV/LiF/Al structure were fabricated and investigated the electrical and optical properties for the prepared devices. ITO(indium tin oxide) and PEDOT:PSS [poly (3,4-ethylenedioxythiophene): poly(styrene sulfolnate)] were used as transparent anode film and hole transport materials, respectively. PFO[poly(9,9-dioctylfluorene)] and MEHPPV[poly(2-methoxy-5(2-ethylhe xoxy)-1,4-phenylenevinyle)] were used as the light emitting host and dopant materials. The doping concentration of MEH-PPV was 9wt% with thickness of about $400{\AA}$. We investigated the dependence of the PFO thickness ranging from $200{\AA}$ to $300{\AA}$ on the electrical, optical properties of PLEDs. Among prepared PLED devices with different PFO thicknesses, the highest value of the luminance was obtained for the PLED device with $250{\AA}$ in thickness. As a result, the current density and luminance ware found to be about $400mA/cm^2$ and $1500cd/m^2$ at 13V, respectively. In addition, the luminance and current efficiency of PLED device with double emitting layer (PFO/PFO:MEH-PPV) were improved about 3 times compared with the one with single emitting layer (PFO:MEH-PPV).

• Journal of Information Display
• /
• v.10 no.3
• /
• pp.107-110
• /
• 2009

Efficient deep-blue organic light-emitting diodes were demonstrated using 4,4'-bis(9-ethyl-3-carbazovinylene)-1,1'-biphenyl doped in double-emission layers (D-EMLs). The D-EML system, which consists of 2-methyl-9,10-di(2-naphthyl)anthracene and 1,4-(dinaphthalen-2-yl)-naphthalene as blue hosts, was employed to broaden the recombination zone and to ensure the good confinement of the holes and electrons. The optimized device showed a peak current efficiency of 4.47 cd/A, a peak external quantum efficiency of 4.09%, and Commission Internationale de L'Eclairage coordinates of (0.16, 0.10).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.990-993
• /
• 2006

We fabricated top emission organic light emitting diode (TEOLED) with transparent metal cathode Barium and Silver bilayer. Very thin Ba/Ag bilayer was deposited on the organic layer by thermal evaporation. This cathode shows high transmittance over 70% in visible range. And the device with a Ba-Ag has a low turn on voltage and good electrical properties.

• Journal of Information Display
• /
• v.7 no.3
• /
• pp.23-26
• /
• 2006

We fabricated top emission organic light emitting diode (TEOLED) with transparent metal cathode Barium and Silver bilayer. Very thin Ba/Ag bilayer was deposited on the organic layer by thermal evaporation. This cathode showed high transmittance over 70% in visible range, and the device with a Ba-Ag has a low turn on voltage and good electrical properties.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1030-1033
• /
• 2006

The efficiency stabilization and the color coordinates in blue organic light-emitting devices (OLEDs) with a double emitting layer (DEL) consisting of 4,4'-Bis(carbazol-9-yl)biphenyl (CBP) and 4,4'-Bis(2,2-diphenyl-ethen-1-yl)diphenyl were investigated. The efficiency of the OLEDs with a DEL did not significantly change with an increase in current density. The Commission Internationale de l'Eclairage coordinates of the OLEDs with a DEL 11 V were (0.150, 0.137), indicative of a deep blue color.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.9
• /
• pp.571-575
• /
• 2014

We synthesized new materials of $Zn(HPB)_2$ and Ir-complexes as blue or red emitting material. We fabricated white Organic Light Emitting Diodes (OLED) by using $Zn(HPB)_2$ for the blue emitting layer, Ir-complexes for the red emitting layer and $Alq_3$ for the green emitting layer. We fabricated white OLED by using double emitting layers of $Zn(HPB)_2$:Ir-complexes and $Alq_3$. The doping rate of Ir-complexes was varied, such as 0.2%, 0.4%, 0.6%, and 0.8%, respectively. When the doping rate of $Zn(HPB)_2$:Ir-complexes was 0.6%, white emission was achieved. The Commission Internationale de l'Eclairage (CIE) coordinates of the white emission was (0.322, 0.312).

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.69-72
• /
• 2020

In this study, the inverted structured electroluminescence (EL) devices were fabricated with double electron transport layers (ETLs). The conduction band minimum (CBM) of TiO₂ NPs is lower than SnO₂ NPs. Therefore, it is expected that inserting TiO₂ NPs between the SnO₂ layer and the emission layer (EML) will reduce the energy barrier and transport electrons smoothly. The quantum dot light emitting diodes (QLEDs) with double ETLs showed the enhanced emission characteristics than those with only SnO₂ layer.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.2
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.