• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.117-122
• /
• 2008

The apartment will be much more convenient than the other one in the application of green technologies, providing the merits by mass production. For example, pre-manufactured building materials can be effectively adapted to the formation of buildings. Recently, the form of double-enveloped window system has been developed for the purposed of minimizing energy loss occurred around windows. On the other hand, the expansion of balcony area was legalized and thus, a visual buffer area does not exist any more. All-glass window wall on apartment houses without a balcony produces pretty harmful area with direct sunbeam. A various types of glass can be applied to the window system and it plays a critical role in the determination of inner visual environment. For the purpose of verifying the potential of its daylighting, a mock-up model has been constructed and tested. The refurbished version of conventional window shows its illuminated characteristics. Clear and Low-e glass have been adapted for window area and daylighting ratio has been compared in both test cells.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.662-667
• /
• 1994

This paper presents the design and construction details of a soundproof enclosure for housing 20 KVA diesel generator-set. As the generator had to be installed close to the hospital building, it was desirable to reduce the transmission of noise by housing the generator in such an enclosure. The diesel engine being an air cooled one, it was essential to supply fresh air into the enclosure for its cooling. Forced inflow of air is provided through an inlet duct located in such a way that the incoming fresh air is thrown close to the inlet of cooling fan of the engine. The high velocity air stream, which heats up while passing over the engine head, escapes to the atmosphere through a rectangular outlet duct with enlarges inlet that receives hot air from the engine. The air ducts were designed specially and have been provided with acoustic lining for sound absorption. The masonary enclosure has been provided with double glazed fixed windows and double doors. The exhaust pipe of the engine fitted with a muffler has been taken out through the enclosure wall facing away from the hospital. Acoustic performance studies conducted in terms of attenuation provided by the enclosure at different frequencies have also been presented and discussed. The noise control measures adopted for building the sound-proof enclosure have been found to be quite effective as the noise levels inside the hospital building are now within the acceptable limits.

• Archives of Plastic Surgery
• /
• 제33권4호
• /
• pp.449-453
• /
• 2006

Purpose: Perceiving the experience that $MRD_1$ is increased after small-incision double-eyelid operation, it has been statistically verified the improvement of $MRD_1$ retrospectively. Therefore, we suggest new interpretation for Korean-specific small eye and more definite classification for ptosis. Methods: In operation, we made 3 small incisions according to the line designed on upper eyelid and removed some soft tissues including connective tissues. Then, figure-of-8 continuous buried ligation was performed through the incision windows. This study is a retrospective study, measures $MRD_1$ changes and excursion distance change of eyelid margine and eyebrow using pre-and post-operative photos of 14 patients. Results: Postoperative photos were taken on the 4th day and all of 14 patients had an improvement in $MRD_1$ statistically. The excursion distance of upper eyelid was improved in half of patients, though not in the range of statistical verification. It was statistically confirmed that the movement of eyebrow was reduced after operation. Conclusion: It is thought that $MRD_1$ improvement without any operation on levator complex means that soft tissue including connective tissue eliminated in operation restricts the movement of upper eyelid. It is defined such factors as burden factors and such phenomenon as burdened eyelid. It is thougt that Korean's small eye is mainly burdened eyelid and cosmetic improvement may be obtaind even by removing such burden factors.

• 한국태양에너지학회 논문집
• /
• 제33권2호
• /
• pp.35-41
• /
• 2013

Dye-sensitized solar cell (DSC) allows light transmission and the application of various colors that make it especially suitable for building-integrated PV (BIPV) application. In order to apply DSC module into windows, it has to be panelized: DSC module should be protected with reinforced glass to the entire surface. Up to date, it seems to be common to make double glazing with DSC modules with air gaps between the glasses and the DSC modules. Few research has been conducted on the characteristics of various glazing types with DSC modules. This study aims to analyze the electrical performance of DSC modules according to panelizing method for glazing unit with DSC modules. The prototype of the DSC glazing that applied silicone filler between DSC modules and glasses was developed. The electrical performances of this type of DSC glazing with the filler and rather conventional double glazing with DSC modules were compared. Their performances were measured using a solar simulator that is suitable for DSC performance testing. The results indicated that the electrical performance of the filler type DSC glazing improved by 7% compared to that of the conventional DSC double glazing type.

• Advances in Energy Research
• /
• 제5권3호
• /
• pp.219-226
• /
• 2017

Electrochemical double layer capacitors (EDLCs) have received a tremendous interest due to their suitability for diverse applications. They have been fabricated using different carbon based electrodes including activated carbons, single walled/multi walled carbon nano tubes. But, graphite which is one of the natural resources in Sri Lanka has not been given a considerable attention towards using for EDLCs though it is a famous carbon material. On the other hand, EDLCs are well reported with various liquid electrolytes which are associated with numerous drawbacks. Gel polymer electrolytes (GPE) are well known alternative for liquid electrolytes. In this paper, it is reported about an EDLC fabricated with a nano composite polyethylene oxide based GPE and two Sri Lankan graphite based electrodes. The composition of the GPE was [{(10PEO: $NaClO_4$) molar ratio}: 75wt.% PC] : 5 wt.% $TiO_2$. GPE was prepared using the solvent casting method. Two graphite electrodes were prepared by mixing 85% graphite and 15% polyvinylidenefluoride (PVdF) in acetone and casting n fluorine doped tin oxide glass plates. GPE film was sandwiched in between the two graphite electrodes. A non faradaic charge discharge mechanism was observed from the Cyclic Voltammetry study. GPE was stable in the potential windows from (-0.8 V-0.8 V) to (-1.5 V-1.5 V). By increasing the width of the potential window, single electrode specific capacity increased. Impedance plots confirmed the capacitive behavior at low frequency region. Galvanostatic charge discharge test yielded an average discharge capacity of $0.60Fg^{-1}$.

• Korean Chemical Engineering Research
• /
• 제60권1호
• /
• pp.139-144
• /
• 2022

본 연구는 미세유체기술을 기반으로 매우 간단하고 효율적인 단분산성 하이드로젤 마이크로 입자 제조 방법을 제안하였다. 구체적으로, 유리모세관 미세유체장치 내에서 형성된 이중에멀젼은 자외선기반 자유라디칼 중합에 의해 빠르게 고형화가 이루어진다. 수용액에 분산됨과 동시에 계면활성제의 부족으로 인해 얇은 오일쉘은 자발적으로 분리되어, 단분산성 하이드로젤 입자를 형성하였다(C.V.=1%). 본 연구의 결과는 water-in-oil (w/o) 단일에멀젼 기반의 제조 방법과 달리 오일 부피를 최소한으로 사용하여 크기 및 조성 제어가 가능한 단분산성 하이드로젤 입자의 제조가 달성될 수 있음을 보여준다. 마지막으로, 상도표를 기반으로 미세유체장치 내 유동 패턴에 대한 심층 연구는 상대적인 부피 유속들 간의 중요한 상관관계를 나타내며 하이드로젤 마이크로 입자의 안정적인 제조를 위한 실험적 근거를 제시하였다.

• 국제초고층학회논문집
• /
• 제12권2호
• /
• pp.129-136
• /
• 2023

Natural ventilation has proven to be an effective passive strategy in improving energy efficiency and providing healthy environments. However, such a strategy has not been commonly adopted to tall office buildings that traditionally rely on single-skin façades (SSFs), due to the high wind pressure that creates excessive air velocities and occupant discomfort at upper floors. Double-skin façades (DSFs) can provide an opportunity to facilitate natural ventilation in tall office buildings, as the fundamental components such as the additional skin and openings create a buffer to regulate the direct impact of wind pressure and the airflow around the buildings. This study investigates the impact of modified multi-story type DSFs on indoor airflow in a 60-story, 780-foot (238 m) naturally ventilated tall office building under isothermal conditions. Thus, the performance of wind effect related components was assessed based on the criteria (e.g., air velocity and airflow distribution), particularly with respect to opening size. Computational fluid dynamics (CFD) was utilized to simulate outdoor airflow around the tall office building, and indoor airflow at multiple heights in case of various DSF opening configurations. The simulation results indicate that the outer skin opening is the more influential parameter than the inner skin opening on the indoor airflow behavior. On the other hand, the variations of inner skin opening size help improve the indoor airflow with respect to the desired air velocity and airflow distribution. Despite some vortexes observed in the indoor spaces, cross ventilation can occur as positive pressure on the windward side and negative pressure on the other sides generate productive pressure differential. The results also demonstrate that DSFs with smaller openings suitably reduce not only the impact of wind pressure, but also the concentration of high air velocity near the windows on the windward side, compared to SSFs. Further insight on indoor airflow behaviors depending on DSF opening configurations leads to a better understanding of the DSF design strategies for effective natural ventilation in tall office buildings.

• 건축역사연구
• /
• 제1권1호
• /
• pp.18-32
• /
• 1992

The Palaces of Chosen dynasty in Seoul had lost its original features. The external appearance of the buildings that remains in palace nowadays, have got former conditions, but its enteriors are reconstructed or removed So we have a little knowledge of interiors of palace buildings, expecially of the door and window system. To clear up ambiguity of what kinds of door are selected, and sorts of using methods are prevailed, we must persuit from the latest building to the older building, and compare with documents. For that purpose the Chukchodang of Toksu palace is selected, which reconstructed in 1904, and compared with the document published in 1906. The consequence of investigation is that the palace buildings were adopted double or triple window system, and the main room have buffer zones, such as corridors or small rooms. And the main rooms were facing with wall paper, so metal fittings are hidden and wooden surfaces are hardly expose for the purpose of amenity.

• 디지털산업정보학회논문지
• /
• 제14권4호
• /
• pp.163-168
• /
• 2018

In this paper presents comparison of performance of flexible solar cells construction applied to curtain walls. The proposed paper compares power generation for curtain walls of various shapes using flexible PV. Through the comparison of performance, the power generation was compared by installing various types of flexible PV on the air layer of double windows. By comparing the measured power generation, it is possible to find an optimal flexible PV shape that can be applied to a curtain wall. Flexible PV installation was divided into diagonal, S and W shapes. As a result of comparison, the amount of power generation when there was no flexure of flexible PV was large. Also, as the angle with the light source increased, the power generation decreased. Therefore, it is necessary to study the structure which can fix the PV more than the flexible PV and to be able to direct the sun without distortion.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권2호
• /
• pp.157-161
• /
• 2004

본 방법을 통해 수술할 경우 몇 가지 장점이 있다. Y needle의 경우 5mm간격으로 고안되어 있어 3부위에서 일정량의 조직결찰이 가능하고 고안에 따라 여러 가지 간격으로 만들어 질 수 있어 환자의 상태에 따라 적용가능하다. 또한 피부부위에서 결막으로 들어가는 부위가 수직이어서 원하는바 정확한 이중검 위치를 만들어 줄 수 있다. 초심자가 시행하더라도 관통부위를 eyelash 경계와 비교적 평행하게 만들어 줄 수 있다. Needle의 삽입이 2개가 한꺼번에 삽입되므로 환자가 느끼는 통증이 감소되며 술자의 편의도도 증가하리라 생각된다. 부분절개법을 사용하여 잉여지방 및 조직을 제거하였고 매몰하여 흉터와 부작용을 최소화하였고 회복기간과 수술시간을 감소시킬 수 있었다. 본 방법은 모든 경우의 이중검수술에 이용될 수는 없겠으나 고찰에서 기술한 비절개식이나 부분절개식 이중검수술의 적응증에 해당되는 경우에 이용할 경우 아주 간단하고 임상적으로 표준화 될수 있는 방법으로 응용될 수 있을 것으로 사료되어 문헌고찰과 함께 보고하는 바이다.