• 셀메드
• /
• 제11권3호
• /
• pp.14.1-14.9
• /
• 2021

Background: Cuscuta reflexa Roxb is a member of the Cuscutaceae family, and in Unani medicine, it is known as Aftimoon. It is a parasitic plant that can be found growing abundantly on various host plants in India up to 3000 metres in altitude during the rainy season. Unani physicians have been using it for years to cure a variety of illnesses, including psychiatric illnesses like melancholia, schizophrenia, and epilepsy. It has been used to cure hepatitis, palpitations, and skin disorders, among other things. Objective of the study: To evaluate anti-anxiety effect of Cuscuta reflexa Roxb in Swiss Albino mice of either sex. Materials and Methods: A total of 24 Swiss Albino mice weighing 25-35 g were used in this study. Animals were chosen at random and held in their cages for at least 7 days in a standard setting. Group A was given regular saline as a vehicle, Group B was given a hydro alcoholic extract of the lower dose of the test drug, Group C was given a hydro alcoholic extract of the higher dose of the test drug, and Group D was given the standard drug Diazepam 5 mg/kg orally. Aftimoon as hydro alcoholic extract (200 mg/kg and 400 mg/kg body wt.) was given in single and double doses and observed for 7 days. Results: For each parameter in each category, mean and standard deviations were computed. For multiple group comparisons, a one-way ANOVA was used, followed by Turkey's post hoc test. (p<0.05) was used as the significance standard. Conclusion: These results advocate that the Aftimoon as double dose (400 mg/kg body wt.) revealed anti-anxiety effect similar to standard drug.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.400-405
• /
• 2001

Nozzle of the double-plated grid plays the role of the spring to support a fuel rod as well as to provide the coolant path in grid. The nozzle was known to be necessary to reduce the spring stiffness for supporting performance. In this study the contact analysis between the fuel rod and the nozzle type spacer grid was performed by using ABAQUS standard to propose the preferable shape in tenn of spring performance. Two small cuts at the upper and lower part of the nozzle appeared to have a minor effect in decreasing the nozzle stiffness. A long slot at the center of the nozzle was turned out not only to decrease the spring constant as desired but also to increase the elastic displacement.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.62-73
• /
• 2001

The scope of this study is focused on the survey of new logistics transportation systems in railroad and case studies of new systems such as piggyback system, bi-modal system swapbody, and double stack train(DST). Piggyback system, bi-modal system, swapbody, and double stack train are reviewed in term of technological validity and economic validity in Korea. Piggyback - trailer does pass loaded weight limits but does not pass train limits and can not utilize the existing freight cars. Piggyback - cargo trunk does pass all the criteria and could be developed by a domestic technology. But this study suggests to expand the length of train cars to 18.300mm for accommodation of two cargo trucks. Bi-modal system and swapbody do also pass. Double stack train could only pass the loaded weights and does not meet the train limit and the possibility of using existing freight cars. Domestic technology could not development DST, due to civil engineering construction limits and low standard height of electric line, which could not afford to operate DST.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.195-196
• /
• 2012

This paper describes combustion tuning methodology of double-swirl gas turbine combustor using six sigma tools. This methodology is consist of five steps-Define, Identify, Design, Optimize and Verify (DIDOV). First, the NOx reduction target was defined in the step design; second, the current status of the plant was diagnosed in the step of identify; third, the vital few control parameters to achieve the defined target were determined by analyzing the correlation between the control parameters and NOx emissions in the step of design; fourth, the optimum condition was derived from one of the six sigma tools in the step of optimize; finally, the optimum condition was verified by applying the condition to the gas turbine combustor in the step of verify. As a result of the suggested method, averaged NOx emissions were reduced by more than 70% and the standard deviation was improved by more than 60%. Thus, this methodology can be attributed to the efficient reduction of NOx emission with saving combustion tuning time.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.177-182
• /
• 2003

The front-end side members of automobiles absorb most of the energy in a case of front-end collision. The front-end side members are required to have a high stiffness together with easiness to collapse sequentially to absorb more impact energy. The axial static collapse test (5mm/min) was conducted by using UTM for form different types of members which have different cross section shapes; single hat, single cap, double cap, and double hat. The single hat shaped section member has the typical standard section, which the double hat shape section has a symmetry in the center to have more stiffness. As a result of the test, the energy absorbing characteristic was analyzed for different section shapes. It turned out that the change of section shape influence the absorbing energy, the mean collapse load and the maximum collapse load, and the relation between the change of section shape and the collapse mode.

• 한국주거학회논문집
• /
• 제12권3호
• /
• pp.133-140
• /
• 2001

This study investigated the heat transmission coefficient through the experiment that the skylight, slope window of 60 degree and 30 degree consisted of pair glass and the double window of external window and internal window paper were suitable for heat insulation. As the result of experiment, the heat transmission coefficient of slope window was 1.06 times in the 60 degree, 1.18 times in the 30 degree and 1.31 times in the skylight as a standard lateral window. The heat transmission coefficient in the double window of external window and internal window paper was 3.017$\textrm{㎉}$/$\textrm{m}^2$.hr.$^{\cire}C$. The slope window was not suitable for the prescription by the increase of the heat transmission coefficient, so the user must pay attention to the treatment. This study investigated only the slope window of 12mm and 16mm pair glass and the double window of external window and internal window paper, study on the various pattern of window must be achived in a future.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.362-368
• /
• 2013

Commercial home appliances using remotely controlled systems consume electric power while in standby mode to prepare for receiving a remote turn-on signal. The proposed power system can significantly reduce standby power consumption without increasing cost. Furthermore, since a Electronic Double Layer Capacitor (EDLC) is used as an auxiliary power storage element, the life cycle is longer and system reliability can be better than with existing approaches. When the energy of the EDLC is not sufficient for turning on the appliance, the power system charges the EDLC without affecting the main system. The proposed power system is verified with a commercial LCD TV and a 3.93mW standby consumption is obtained. This standby consumption can be regarded as zero standby equipment according to the IEC-62031 standard.

• Wind and Structures
• /
• 제32권4호
• /
• pp.341-354
• /
• 2021

Articulated towers are one of the class of compliant offshore structures that freely oscillates with wind and waves, as they are designed to have low natural frequency than ocean waves. The present study deals with the dynamic response of a double-pendulum articulated tower under hydrodynamic and aerodynamic loads. The wind field is simulated by two approaches, namely, single-point and multiple-point. Nonlinearities such as instantaneous tower orientation, variable added mass, fluctuating buoyancy, and geometrical nonlinearities are duly considered in the analysis. Hamilton's principle is used to derive the nonlinear equations of motion (EOM). The EOM is solved in the time domain by using the Wilson-θ method. The maximum, minimum, mean, and standard deviation and salient power spectral density functions (PSDF) of deck displacement, bending moment, and central hinge shear are drawn for high and moderate sea states. The outcome of the analyses shows that tower response under multiple-point wind-field simulation results in lower responses when compared to that of single-point simulation.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1991년도 가을 학술발표회 논문집
• /
• pp.33-39
• /
• 1991

This Paper presents a geometrically nonlinear behaviors of shell problems by using the three-dimensional curved shell element, which includs large displacements and large rotations. The standard formulation of the geometrically nonlinearity is restricted to the assumption of infinitesmal rotation increments. This standard formulation for the displacement function is numerically improved by considering the second order expansions of Tayler series. The nonlinear behaviors of the single and double curved shells are compared wi th the other results.

• 대한인간공학회지
• /
• 제31권5호
• /
• pp.629-636
• /
• 2012

Objective: The purpose of this study is to compare the characteristics of single and double finger gestures related on the web browser and to extract the appropriate finger gestures. Background: As electronic equipment emphasizes miniaturization for improving portability various interfaces are being developed as input devices. Electronic devices are made smaller, the gesture recognition technology using the touch-based interface is favored for easy editing. In addition, user focus primarily on the simplicity of intuitive interfaces which propels further research of gesture based interfaces. In particular, the fingers in these intuitive interfaces are simple and fast which are users friendly. Recently, the single and double finger gestures are becoming more popular so more applications for these gestures are being developed. However, systems and software that employ such finger gesture lack consistency in addition to having unclear standard and guideline development. Method: In order to learn the application of these gestures, we performed the sketch map method which happens to be a method for memory elicitation. In addition, we used the MIMA(Meaning in Mediated Action) method to evaluate gesture interface. Results: This study created appropriate gestures for intuitive judgment. We conducted a usability test which consisted of single and double finger gestures. The results showed that double finger gestures had less performance time faster than single finger gestures. Single finger gestures are a wide satisfaction difference between similar type and difference type. That is, single finger gestures can judge intuitively in a similar type but it is difficult to associate functions in difference type. Conclusion: This study was found that double finger gesture was effective to associate functions for web navigations. Especially, this double finger gesture could be effective on associating complex forms such as curve shaped gestures. Application: This study aimed to facilitate the design products which utilized finger and hand gestures.