• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.514-516
• /
• 2003

LCD(Liquid Crystal Display)는 자체 발광능력이 없으므로 그 후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU의 핵심부품으로써 광원으로부터 나온 빛을 LCD의 패널 방향으로 이끌어내는 역할을 담당하고 있는 부분이 바로 도광판이고, 빛을 패널 방향으로 고르게 분포시키기 위해 도광판 하부에 점 모양의 확산물질을 인쇄한다. 이 인쇄패턴은 광원으로부터의 거리에 따라서 그 크기를 다르게 함으로써 패널 부분으로 균일한 평면광을 생성하도록 한다. 따라서 보다 균일한 평면광을 생성하는 BLU를 개발하기 위해서는 주어진 조건에서 패널 부분으로 균일한 평면광을 생성하도록 설계된 인쇄패턴을 찾는 것이 관건이다. 이러한 인쇄패턴을 Simplex Search 알고리즘을 사용하여 자동으로 찾게 함으로써 수작업으로 찾는 것보다 빠른 시간 내에 더욱 효율적인 인쇄패턴을 찾도록 한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.237-240
• /
• 2005

The demand of micro electrical mechanical system (MEMS) bio/chemical sensor is rapidly increasing. To prevent the contamination of sensing area, a filtration system is required in on-chip total analyzing MEMS bio/chemical sensor. A nano-filter was mainly applied in some application detecting submicron feature size bio/chemical products such as bacteria, fungi and so on. We suggested a simple nano-filter fabrication process based on replication process. The mother pattern was fabricated by holographic lithography and reactive ion etching process, and the replication process was carried out using polymer mold and UV-imprinting process. Finally the nano-filter is obtained after removing the replicated part of metal deposited replica. In this study, as a practical example of the suggested process, a nano-dot array was replicated to fabricate nano-filter fur bacteria sensor application.

• Journal of Broadcast Engineering
• /
• v.17 no.2
• /
• pp.316-324
• /
• 2012

In this paper, a novel descreening method using HOG(histogram of gradient)-based adaptive smoothing filter is proposed. Conventional edge-oriented smoothing methods does not provide enough smoothing to the halftone image due to the edge-like characteristic of the halftone noise. Moreover, clustered-dot halftoning method, which is commonly used in printing tends to create Moire pattern because of the intereference in color channels. Therefore, the proposed method uses HOG to distinguish edges and the amount of smoothing to be performed on the halftone image is then calculated according to the magnitude of the HOG in the edge and edge normal orientation. The proposed method was tested on various scanned halftone materials, and the results show that it effectively removes halftone noises as well as Moire pattern while preserving image details.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.1
• /
• pp.63-68
• /
• 2015

Micro/nano patterns for optical concentration and diffusion have been studied in the various fields such as displays, optics, and sensors. Conventional micro patterns were continuous and linear shapes due to using linear-type light sources, however, recently non-continuous patterns have been applied as point sources are used for dot-type light sources such as LEDs and OLEDs. In this study, a hybrid machining technology combining an indentation machining method and an AAO process was developed for manufacturing the non-continuous micro patterns having nano patterns. First, mirror-like surfaces ($R_a<20nm$) of pure Aluminum substrates were obtained by optimizing cutting conditions. Then, The letter of 'K' consisting of the arrays of the micro patterns was manufactured by the indentation machining method which has a similar principle to indentation hardness testing. Finally, nano patterns were machined by AAO process on the micro patterns. Conclusively, a specific letter having nano-micro hybrid patterns was manufactured in this study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.582-585
• /
• 2018

As traffic volume increases and road networks become more complicated, identifying for accurate traffic flow and driving smooth traffic flow are a concern of many countries. There are various analytical techniques and studies which desire to study about effective traffic flow. However, the necessary activity is finding the traffic flow pattern through data visualization including location information. In this paper aim to study a real-world urban traffic trajectory and visualize a pattern of traffic flow with a simulation tool. Our experiment is installing the sensor module in 40 taxis and our dataset is generated along 24 hours and unscheduled routes. After pre-processing data, we improved an open source traffic visualize tools to suitable for our experiment. Then we simulate our vehicle trajectory data with a dots animation over a period of time, which allows clearly view a traffic flow simulation and a understand the direction of movement of the vehicle or route pattern. In addition we further propose some novel timelines to show spatial-temporal features to improve an urban environment due to the traffic flow.

• Journal of the Korean Vacuum Society
• /
• v.18 no.4
• /
• pp.310-317
• /
• 2009

Vertical wet equipment for the BGA develop process was newly developed substituted for conventional horizontal wet equipment. The benefits of vertical equipment are that the pattern damages generated by the collision between the patterns and transferring rollers can be eliminated because the direct contact between the equipment's transferring units and the soft dry film patterns does not occurs. Taguchi experiment was conducted to optimize the process characteristics for the vertical equipment. The experiment was organized as the smaller the better problem which includes adequate uncontrollable factor and controllable factors. The uncontrollable factors are the 4 sides of two panels which are loaded to the equipment at the same time. By the analysis of the experiment, temperature of the develop chemicals and develop spraying time are analyzed as the main controllable factors. Finally, line pattern's minimum width which is not damaged for the develop process was improved from $13.8{\mu}m$ for the horizontal equipment to $10.4{\mu}m$ for the vertical equipment. And dot pattern's minimum width is improved from $22.1{\mu}m$ to $16.3{\mu}m$.

• Clinical Endoscopy
• /
• v.56 no.2
• /
• pp.203-213
• /
• 2023

Background/Aims: Intestinal metaplasia (IM) of the stomach is a precancerous condition that is often not visible during conventional endoscopy. Hence, we evaluated the utility of magnification endoscopy and methylene blue (MB) chromoendoscopy to detect IM. Methods: We estimated the percentage of gastric mucosa surface staining with MB, mucosal pit pattern, and vessel visibility and correlated it with the presence of IM and the percentage of metaplastic cells in histology, similar to the Operative Link on Gastric Intestinal Metaplasia (OLGIM) stage. Results: IM was found in 25 of 33 (75.8%) patients and in 61 of 135 biopsies (45.2%). IM correlated with positive MB staining (p<0.001) and other than dot pit patterns (p=0.015). MB staining indicated IM with better accuracy than the pit pattern or vessel evaluation (71.7% vs. 60.5% and 49.6%, respectively). At a cut-off point of 16.5% for the MB-stained gastric surface, the sensitivity, specificity, and accuracy of chromoendoscopy in the detection of advanced OLGIM stages were 88.9%, 91.7%, and 90.9%, respectively. The percentage of metaplastic cells detected on histology was the strongest predictor of positive MB staining. Conclusions: MB chromoendoscopy can serve as a screening method for detecting advanced OLGIM stages. MB mainly stains IM areas with a high concentration of metaplastic cells.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.41-53
• /
• 2010

Traffic safety assessment is often accomplished by analyzing the number of crashes occurring in some geographic space over certain specific time duration. In this paper, we introduce a procedure that can efficiently analyze spatial and temporal changes in traffic crashes before-and-after implementation of a certain traffic controlling measure. For the analysis, crash frequency data before-and-after closing a major highway around St. Louis in Missouri was collected through Transportation Management System(TMS) database that is maintained by Missouri Department of Transportation (MoDOT). In order to identify any spatial and temporal pattern in crashes, each crash is pinpointed on a map using the dynamic segmentation in GIS. Then, the identified pattern is statistically confirmed using an analysis of variance table. The advantage of this approach is to easily assess spatial and temporal trend of crashes that are not readily attainable otherwise. The results from this study can possibly be applied in enhancing the highway safety assessment procedure. This paper also makes several suggestions for future development of a comprehensive transportation data system in Korea which is similar to MoDOT's TMS database.

• Conservation Science in Museum
• /
• v.15
• /
• pp.78-95
• /
• 2014

To examine the materials, production techniques, and key features of Goryeo wooden lacquerwares, scientific analysis was conducted on six relevant lacquerware items. All of the items, except for a lacquered bowl ^{duksu 4123}, were found to have been made by first covering the surface of the wood with cloth and then varnishing with lacquer. The wooden frames of flower-shaped lacquered case and pine leaves shape lacquered case were made by wrapping thin wood around either the lid or bottom panel. In most cases, microscopic analysis revealed a lower layer of lacquer mixed with bone ash and bone dust, followed by an upper varnish layer of lacquer. SEM-EDS analysis and μ-XRF ^{Micro-X-ray Fluorescence} analysis showed that vermilion lacquer mixed with cinnabar was used on the surface. A lid decorated with a dot pattern was made by first varnishing the surface with yellow lacquer mixed with orpiment, and then irregular dot pattern with a mixture of black lacquer and soot. The vermilion lacquer used to varnish the side of the lacquered bowls was composed of lacquer mixed with cinnabar and minium ^{Red Lead}.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.30 no.3
• /
• pp.45-56
• /
• 2012

Printing technology is accepted by appropriate technology that smart phones, tablet PC, display(LCD, OLED, etc.) precision recently in the electronics industry, the market grows, this process in the ongoing efforts to improve competitiveness through the development of innovative technologies. So printed electronics appeared by new concept. This technology development is applied on electronic components and circuits for the simplification of the production process and reduce processing costs. Low-temperature process making possible for widening, slimmer, lighter, and more flexible, plastic substrates, such as(flexible) easily by forming a thin film on a substrate has been studied. In the past, the formation of the electrode used a screen printing method. But the screen printing method is formation of fine patterns, high-speed printing, mass production is difficult. The roll-to-roll printing method as an alternative to screen printing to produce electronic devices by printing techniques that were used traditionally in the latest technology and processing techniques applied to precision control are very economical to implement fine-line printing equipment has been evaluated as. In order to function as electronic devices, especially the dozens of existing micro-level of non-dot print fine line printing is required, the line should not break at all, because according to the specifications required to fit the ink transfer conditions should be established. In this study of roll-to-roll printing conductive paste suitable for gravure offset printing by developing Ag paste for forming fine patterns to study the basic physical properties with the aim of this study were to.