• Journal of Forest and Environmental Science
• /
• v.37 no.1
• /
• pp.52-61
• /
• 2021

Decay fungi can decompose plant debris to recycle carbon in the ecosystem. Still, they can also be fungal pathogens, which can damage living trees and/or wood material and cause a large amount of timber loss. We isolated and identified basidiomycetous fungi from the decayed bark of Mongolian oak wrapped with sticky roll traps. The degrading enzyme activities were then tested for all fungal isolates. The decay ability of selected isolates was assessed based on the weight loss of wood discs after inoculating with culture suspension of decay fungi under the different humidity levels. A total of 46 basidiomycetous fungal isolates belonged to 12 species, and 10 genera were obtained from Jong Myo (16 isolates), Chang Kyung palace (7 isolates), Cheong Gye (10 isolates), and Gun Po (13 isolates). Gymnopus luxurians was the most dominant fungus in the present study, and this species distributed in all survey sites with 9 isolates in Jong Myo, followed by 3 isolates in Chang Kyung palace, while Cheong Gye and Gun Po had only 1 isolate each. Among 46 isolates, 44 isolates secreted at least one enzyme, while 25 isolates produced both cellulase and phenol oxidase enzymes, and 2 isolates produced neither. The assessment of decay ability by artificial inoculation indicated that the weight loss of wood discs was significantly influenced by humidity conditions when inoculated with bark decay fungi. The percent weight losses by G. luxurians inoculation in RH of 90-100% and RH of 65-75% were 4.61% and 2.45%, respectively. The weight loss caused by Abortiporus biennis were 6.67% and 0.46% in RH of 90-100% and RH of 45-55%, respectively. The humidity reduction approach should be applied for further studies to control the growth and spread of bark decay fungi on the trunks wrapped with sticky roll traps.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.4
• /
• pp.495-501
• /
• 2011

The purpose of this study was to develop the inertial sensor module system to detect gait event using single angular rate sensor(gyroscope), and evaluate the accuracy of this system. This sensor module is attached at the heel and gait events such as heel strike, foot flat, heel off, toe off are detected by using proposed automatic event detection algorithm. The developed algorithm detect characteristics of pitch data of the gyroscope to find gait event. To evaluate the accuracy of system, 3D motion capture system was used and synchronized with sensor module system for comparison of gait event timings. In experiment, 6 subjects performed 5 trials level walking with 3 different conditions such as slow, preferred and fast. Results showed that gait event timings by sensor module system are similar to that by kinematic data, because maximum absolute errors were under 37.4msec regardless of gait velocity. Therefore, this system can be used to detect gait events. Although this system has advantages of small, light weight, long-term monitoring and high accuracy, it is necessary to improve the system to get other gait information such as gait velocity, stride length, step width and joint angles.

• Journal of Genetic Medicine
• /
• v.9 no.2
• /
• pp.101-103
• /
• 2012

Paracentric inversion of chromosome 18 is a rare cytogenetic abnormality. The vast majority of paracentric inversions are harmless and the offspring of paracentric inversion carriers have only slightly elevated risks for unbalanced karyotypes. However, various clinical phenotypes are seen due to breakpoint variation or recombination. We report a prenatally detected case of familial paracentric inversion of chromosome 18, inv(18)(q21.1q22), with normal clinical features.

• Journal of Digital Convergence
• /
• v.10 no.6
• /
• pp.331-339
• /
• 2012

The easy and simple simultaneous analytical method of preservatives (BA, SA, DHA, MP, EP, IPP, PP, IBP and BP) was studied by more easily changing from method used in food and drug using HPLC with scherzo SM-C18 column. All presevatives were seperated successfully in mobile phase of 50 mM ammonium formate : 0.1% phosphoric acid (50:50 v/v%) and 50 mM ammonium formate : acetonitrile (30 : 70). Retention time of BA, SA, DHA, MP, EP, IPP, PP, IBP and BP was 7.74, 9.08, 12.57, 13.83, 21.62, 27.29, 28.20, 33.20 and 33.68 min, respectively. The calibration curves of BA, SA, DHA, MP, EP, IPP, PP, IBP and BP were linear over the concentration range of 5~80 ${\mu}g/mL$ with correlation coefficient of above 0.999. The limit of detection (LOD) and limit of quantitation (LOQ) of BA, SA, DHA, MP, EP, IPP, PP, IBP and BP were 0.52 and 1.58, 1.09 and 3.29, 1.00 and 3.03, 1.36 and 4.13, 1.26 and 3.83, 1.02 and 3.08, 1.11 and 3.37, 0.82 and 2.48, 0.85 and 2.59 ${\mu}g/mL$, respectively. The coefficients of variation for intra- and inter-day assay were 0.12~2.68 and 0.18~2.66%, respectively. The developed method showed good intra- and inter-day precision and accuracy. The preservatives used in mouthwashes were BA, MP and PP and were detected in 24 samples(86%) except for 4 samples and not showed significant difference in using dose of adult and children. In conclusion, the developed method can be useful for simultaneous analysis of preservatives in mouthwashes and these results suggest that could be applied to fundamental study and guideline on content of preservatives in mouthwashes.

• Journal of Korea Water Resources Association
• /
• v.37 no.5
• /
• pp.353-361
• /
• 2004

Effective storage in agricultural reservoir has been determined through the reservoir simulation operation based on the water budget analysis. Since each watershed has the native property for runoff, considering the runoff yielding from the basin is feasible to the determination of reservoir effective storage. In this study the stochastic linear programming model considering mainly runoff from watershed has been also formulated to analyze the effective storage of the exiting reservoir. The linear decision rule coupled with chance-constrained model in the linear programming model contributes to reduce the size of linear program model without considering the period of analysis. The Geum-Gang reservoir located in Ansung have been adopted to evaluate the effective storage. It has been shown that the effective storage based on the linear programming model is greater than that based on the water budget analysis. It has been also desired that once the effective storage is obtained through the linear programming model, operation of the reservoir should be performed to check the designed capacity.

• Convergence Security Journal
• /
• v.13 no.5
• /
• pp.45-56
• /
• 2013

In order to prepare against the unpredictable provocation of nK on NWI, instead of the threat based force enhancement, sufficient capability based force planning is required in consideration to enemy capability, operations environment, and technological development. This thesis proposes a method on how to prioritize the required capabilities of NWI during the process of identifying capabilities and investing on the decided acquisition assets. Ambiguity in deciding the priority is eliminated and detailed planning is possible through instituting relationship of organization, operation and capability, and by designating weight based on the above relationship. This method identify the various operations and required capabilities, classify the order of priority clearly for NWI, when compare to other method of priority decision. Although capability based force planning requires more assets and faces limitations due to budget, this method will provide and efficient decision making procedure through precise prioritization.

• Journal of Sensor Science and Technology
• /
• v.15 no.3
• /
• pp.179-185
• /
• 2006

We have developed a noncontact temperature sensor using a silver halides infrared optical fiber. An infrared radiation from a heat source is transferred by a silver halides infrared optical fiber and measured by infrared sensors such as a thermopile and a thermal optical power-meter. The relationships between the temperature of a heat source and the output voltage of the thermopile and the optical power of a thermal optical power-meter are determined. The measurable temperature range using a thermopile and a thermal optical power-meter are from 100 to $750^{\circ}C$ and from 30 to $750^{\circ}C$ respectively. It is expected that a noncontact temperature sensor using infrared optical fiber can be developed for medical and industrial usages based on the results of this study.

• Journal of Sensor Science and Technology
• /
• v.12 no.1
• /
• pp.34-43
• /
• 2003

In this study, we implemented the measurement of pH, $pO_2$, $pCO_2$ of the arterial blood on a portable blood gas analysis system. This system is consist of two parts of hardware and software. The hardware part is divided into a fluidic mechanism and an electronic circuit unit. The system program is composed of operating, washing, correcting, and measuring routines. Both of 1-point and 2-point calibration schemes were used to enhance the accuracy of the measurement. In order to evaluate the performance of the developed system, we measured and performed statistical analysis on the characteristics of the sensing electrode response. As a result, coefficient variation was within 1.12, and maximum error was within 1.298%. We confirmed development possibility of portable blood gas analyzer.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.373-378
• /
• 2012

The purpose of this study was to develop an electric riding machine for cycle fitting to control riding posture easily, to measure frame size quantitatively, and to overcome disadvantages of the traditional systems. The electric riding machine consisted of actuator, load controller, and display & control unit. The actuator unit by BLDC(BrushLess Direct Current) motor drives the saddle height up and down, the crank forward and backward, the handlebar up and down, and the handlebar forward and backward. The load controller unit controls loads by Eddy current controller with electromagnet and aluminum circular plate. The display & control unit consisted of frame size controller and display panel which shows top tube length(485~663mm), head tube length(85~243mm), seat tube length(481~671mm), and seat tube angle($62.7{\sim}76.4^{\circ}$). The range of frame size control for developed electric riding machine did not have difference compared to traditional commercial systems, but quantitative and precise control with 0.1 mm length and $0.1^{\circ}$ angle was possible through digital measurement. Unlike traditional commercial systems, frame size control was possible during riding through motor driven method, thus fitting duration decreased. It is necessary for further improvement to have feedback from users. It is believed that developed electric riding machine can help to develop domestic fitting system.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.3
• /
• pp.357-363
• /
• 2012

The purpose of this study was to investigate the effects of different saddle heights on lower-limb joint angle and muscle activity. Six elite cyclists(age: $32.2{\pm}5.2years$, height: $171.0{\pm}3.5cm$, weight: $79.7{\pm}5.6kg$, cycle career: $13{\pm}6.2years$) participated in three min. submaximal(90 rpm) pedaling tests with the same load and cadence based on saddle heights where subject's saddle height was determined by his knee flexion angle when the pedal crank was at the 6 o'clock position. Joint angles(hip, knee, ankle joints) and the activity of lower limb muscles(biceps femoris(BF), vastus lateralis(VL), tibialis anterior(TA) and gastrocnemius medial(GM)) were compared by measuring 3D motion and electromyography(EMG) data. Results showed that there were significant differences in minimum hip & knee joint angle and range of motion of hip and knee joint between saddle heights. Onset timing and integrated EMG of only BF among 4 muscles were significantly different between saddle heights. Especially there was a negative relationship between minimum hip joint angle and onset timing of BF in most subject, which means that onset timing of BF became fast as the degree of bending of the hip joint became larger by saddle height. Optimal pedaling will be possible through increased amount of muscle activation due to the appropriate burst onset timing by proper pedaling posture with adjusted saddle height.