• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.4
• /
• pp.257-265
• /
• 2009

The long-term effects of soil management history on microbial communities are still poorly understood. Our objectives were to determine the impact of long-term application of soil amendments on microbial communities in rice paddy fields. The treatments selected were control where crops were grown without any nutrient application (CON); nitrogen-phosphorus-potassium (NPK); NPK plus compost (CNPK); NPK plus lime (LNPK); and NPK plus silicate (WNPK). The long-term addition of organic and inorganic amendments significantly changed soil chemical properties. The amount of organic carbon increased in the treatments with fertilizer and amendments over that in the soil without inputs. However, we could not observe the differences of bacterial population among the treatments, but the number of aerobic bacteria increased by the addition of amendments. Isolates from the rice paddy soils before irrigation were Dactylosporangium, Ewingella, Geobacillus, Kocuria, Kurthia, Kytococcus, Lechevalieria, Micrococcus, Micromonospora, Paenibacillus, Pedobacter, Pseudomonas, Pseudoxanthomonas, Rhodococcus, Rothia, Sphingopyxis, Stenotrophomonas, and Variovorax. Dominant genera were Arthrobacter, Kocuria, Kurthia, and Bacillus in the long-term field. Microbial biomass was the highest in the compost treatment (CNPK), and was the lowest in the CON. Dehydrogenase activity in soils treated with rice compost straw was the highest and the activity showed an increasing trend according to treatment as follows: CON < WNPK < NPK = LNPK < CNPK. These results demonstrate that soil management practice, such as optimal application of fertilizer and amendment, that result in accumulations of organic carbon may increase microbial biomass and dehydrogenase activity in long-term rice paddy soils.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.1
• /
• pp.42-49
• /
• 1988

In order to utilize sea mustard, Undaria pinnatifida, effectively. sea mustard jam was prepared by use of physical properties of polysaccharides, mainly alginic acid and then its chemical composition, nutritive qualifies and the stability of pigments were examined. Suitable processing condition for sea mustard jam was as fellows : as the first stage, fresh sea mustard was scalded for 20 sec at $85^{\circ}C$ and dried sea mustard was dipped for 20 min in cold water for rehydration, then both sea mustards were treated by draining and chopping. Next, after adding 4 fold of $0.5\%\;K_2HPO_4$ solution to weight of chopped sea mustards, the mixed solutions were agitated for 15 min at $95^{\circ}C$, and gelated sea mustards were filterated by pressing. Flow characteristics of those sea mustard jam were regarded mixed type having pseudoplastic type and yield stress. Judging from sensory evaluation, adding $0.375\%$ of saccharin, $2\%$ of sorbitol, $0.25\%$ of citric acid and $0.5\%$ of powder of roasted soybean to sea mustard jam were suitable for enhancing taste and flavor of product. Chemical composition of products were scarcely changed throughtout processing. Jam processed by fresh sea mustard was better than dried one in contents of chlorophyll and total carotenoid pigments. In fatty acid composition, polyenoic acids of $C_{18:3},\;C_{20:4},\;C_{20:5},\;C_{22:6}$ were held high contents as known to have lowering function of cholesterol contents. It was presumed that dominant contents in free amino acids such as lysine, alanine, glutamic acid and organic acids such as citric acid, oxalic acid, $\alpha-ketoglutaric$ acid, lactic acid and succinic acid held important role for the flavor of sea mustard jam.

• Journal of the Korea Concrete Institute
• /
• v.16 no.1 s.79
• /
• pp.61-69
• /
• 2004

The bridge piers under service suffered a brittle failure due to the deterioration of lap-spliced longitudinal reinforcement without developing its flexural capacity or ductility. The earthquake induced lateral force results in tension which causes bond-slip failure at the lap-spliced region in circular bridge piers. In this case, such a brittle failure can be controlled by the seismic retrofit using FRP laminated circular tube. The retrofitted piers using FRP laminated circular tube showed significant improvement in seismic performance due to FRP's confinement effect. This paper presents the analytical results on the seismic strengthening effect of circular bridge piers with poor lap-splice details and strengthened with FRP laminated circular tube. FRP's confinement effect is predicted by the classical elasticity solution for the laminated circular tube manufactured with several layers. The FRP laminated circular tube induces the flexural failure instead of a bond-slip failure of the circular reinforced concrete piers under seismic induced lateral forces. To investigate the correctness and effectiveness of analytical solution derived in this study, the analytical results were compared with the experimental data and it was confirmed that the results were correlated well each other, The effects on the confinement of FRP laminated circular tube, such as the number of layers, the fiber orientations, and the mechanical properties, were investigated. From the parametric study, it was found that the number of layers, the fiber orientations, and the major Young's modulus (E11) of the FRP laminated circular tube were the dominant parameters affecting the confinement of reinforced concrete circular bridge piers.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.1056-1063
• /
• 2012

Recent rapidly growth in nanotechnolgies is promised novel benefits through the exploitation of their unique industrial and biomedical applications. With increasing utilization of nanomaterials in consumer products, the potential release of nanomaterials into the environment and their impacts on the ecosystem and human health have been the issues of concern. Nanomaterials that was exposed unintentionally in environment might be accumulated in various environmental media, and finally it will be influenced to human and ecosystems. Therefore, it is important to understand the fate and behavior of nanoparticles for understanding effects on environmental media (air, water, and soil phase). Therefore, in this work, we investigated the several cases for environmental exposure of nanomaterials and suggested the direction of further research. In workplace, exposure to air media is dominant, but finally waste and wastewater was moved to the water and soil phase. In addition, we found the existing sewage treatment plant was not suitable to remove completely nanomaterials in wastewater flow. To deeper study, environmental monitoring tool must be developed additionally and we suggested the several analyzing method for aged and pristine physicochemical properties of nanomaterials exposed into environmental media. This review for nanomaterials' exposure to environmental media will be helpful to investigate the environmental fate of nanomaterials and define the suitable treatment method for nano-waste.

• The Korean Journal of Ecology
• /
• v.24 no.2
• /
• pp.101-109
• /
• 2001

We created an environmental forest on the basis of ecological design around the incineration plant of Jindo Engineering and Construction Co., Ltd., which is located in Jeongwang-dong, Siheung-si, Kyunggi-do. To get ecological information of this site, physico-chemical properties of soil on salt marsh, which is located close to the syudy site and of forest soil transported from other sites for ecological restoration were analyzed. Texture of salt marsh and transported soils were loam and sandy loam, respectively. pH, organic matter, T-N, available P, and exchangeable K and Na contents of salt marsh and transported forest soils were 6.7 and 5.4, 4.1 and 0.4%, 1.0 and 0.3mg/g, 46.7 and 6.8ppm, 521 and 207ppm, and 3.8 and 0.5mg/g, respectively. Introduced plants were selected among the dominant species of forests and the species composing the potential natural vegetation around the present study site. Those plants were selected again by considering the tolerances to air pollution and to salt, and their availability. Selected trees were Pinus thunbergii, Sophora japonica, Celtis sinensis, Quercus aliena, Q. serrata, Q. dentata, and Q. acutissima. Selected sub-trees were Albizzia julibrissin, Koelreuteria poniculata, and Styrax japonica and shrubs were Rhododendron yedoense var. poukhanense, R. mucronulatum, Callicarpa japonica, Euonymus alatus, E. japonica, and R. schlippenbachii. On the other hand, introduction of herbs was not considered except for Liriope platyphylla, which was ornamentally planted in one site. Planting bed of mound type was adopted to provide the fine drainage system. Mound was designed to furnish litter, A, B, and C layers simuating the profile of forest soil. Slope of mound was mulched by rice straw of 2cm in thickness to prevent for sliding of litter and soil in cases of strong wind or heavy rain. Height of mound was designed to secure more than 1 m by combining A and B layers. Narrow zones, in which mound with stable slope degree cannot be prepared, was designed to equip the standard soil depth with the introduction of stone for supporting. On the other hand, plants with shallow root system were arranged in some zones, in which satisfactory soil depth cannot be ensured. Plants were arranged in the order of tree, sub-tree, and shrub from center to edge on the mound to make a mature forest of a dome shape in the future. Dispersion of plants was designed to be random pattern rather than clumped one. Problems on creation of the environmental forest by such ecological design were found to be management or inspection by non-specialized project operators and inspecting officers, and regulations for construction without ecological background. Alternative plans to solve such problems were suggested.

• Journal of the Korean earth science society
• /
• v.34 no.1
• /
• pp.41-50
• /
• 2013

To analyze the distribution pattern of flood sediment deposits near the mouth of Chucheoncheon (river), side scan sonar images and seafloor sediment properties were investigated in the offshore area within about 50 m deep in water. Based on the analysis result of the sonar images, the seafloor of the study area is divided into three areas of basement, sandy-mud, and dispersed flood sediment. The colors of sonar images in each area are represented by dark black, light grey, and greyish black, respectively. The sediment composition in the grey black area shows 33.73% of gravel, 62.88% of sand, 3.37% of silt, and 0.02% of clay. On the other hand, the composition of the light grey area is 10.31% of sand, 56.42% of silt, and 33.27% of clay. Especially the sediment of the grey black area contains the considerable amount of burned plant fragments in black color, which could distinctly be differentiated from those in the offshore. The distribution pattern of the flood sediment deposits suggests that the land-originated detrital sediments seem to be transported from the Chucheon river into offshore along the shore rather than transversely. In conclusion, the longshore current of the study area is probably dominant to affect the spatial distribution of bottom features.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.6
• /
• pp.9-15
• /
• 2004

PZT(30/70) thick film was fabricated by using 1,3 propanediol-based sol-gel method. Prepared film of pyroelectric property was investigated by Dynamic method of modulation frequency dependence. Pyroelectric coefficient was obtained about $5.0{\times}10^{-8}\;C/cm^2{\cdot}K$. The figure of merits for voltage responsively and specific detectivity were $3.4{\times}10^{-11}\;C{\cdot}cm/J$ and $5.9{\times}10^{-9}\;C{\cdot}cm/J$, respectively, because of relative high-dielectric constant and high-pyroelectric coefficient. Voltage responsively was increased at low modulation frequency and it was decreased at high modulation frequency. Voltage responsively was maximum 1.84 V/W at 10Hz. As Johnson noise is dominant, Noise voltage was increased nearly proportional to $f^{-1/2}$. Noise equivalent power and specific detectivity were $2.83{\times}10^{-7}\;W/Hz^{1/2}$ and 3.13{\times}10^5\;cm{\cdot}Hz^{1/2}/W$ the same frequency at 80Hz, respectively.

• Korean Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.541-550
• /
• 2013

The objective of this study was to understand the distribution characteristics of largemouth bass as an exotic species in relation to water chemistry. The survey was conducted in 10 reservoirs in Korea that showed different properties in size, location and eutrophic state. Total number of fish species observed in the artificial reservoirs was 52 (13 family) and the relative abundance of the bass was 13% of the total, which is the third dominant species in the whole sample. The relative abundance of bass was the highest in the Pyungtak reservoir (60%), whereas the Daechung reservoir showed the lowest abundance (only 3%). Although no significance difference statistically were founded in the relationship between bass abundance and water quality parameters. The reservoir trophic state showed some relationships. As result, the higher abundance was observed in hypertrophic reservoirs that located in the esturine regions compared to other large and medium reservoirs classified as meso- or eutrphic state. In conclusion, bass distribution in the reservoir ecosystem can not be directly explained by water chemistry only but other environmental factors should be considered.

• Journal of Food Hygiene and Safety
• /
• v.6 no.2
• /
• pp.89-93
• /
• 1991

The present study was conducted to investigate the prevalence, the biochemical properties and the enterotoxin types of Staphylococcus aureus in healthy human and patient. A total of 61 S. aureus strains were isolated from 142 samples. The prevalence of S. aureus isolated from healthy human and patient were 17.7% and 14.0%, respectively. All the isolates showed the production of coagulase, lecithinase and hemolysis (${\alpha}-hemolysis;\;32.8%,\;{\beta}-hemolysis;\;67.2%$) on sheep blood agar. Coagulase type VII (38.4%) and type 111 (26.0%) were dominant among coagulase types I through VIII. Twenty-four (52.2%) of 46 strains tested produced one or more enterotoxin; enterotoxin A, Band C were produced by 3, 9 and 12 strains, respectively. Enterotoxins were produced by 100% of type 11 strains, 75% of type 111 and 39.1 % of type VII. Commonly, coagulase type II produced enterotoxin B or C, and type VII produce enterotoxin C.

• Journal of the Korean Ceramic Society
• /
• v.42 no.2 s.273
• /
• pp.88-93
• /
• 2005

Ti-AI-Si-N coating layers were deposited on WC-Co substrates by a hybrid system of arc ion plating and sputtering techniques. The coatings were prepared with different Si contents to investigate the effect of Si content on their mechanical properties and microstructures. The dry sliding wear experiments were conducted on Ti-AI-Si-N coated WC-Co discs at constant load, 3N, and sliding speed, 0.1 m/s with two different counterpart materials such as steel ball and zirconia ball using a conventional ball-on-disc sliding wear apparatus. In the case of steel ball, the friction coefficient of Ti-AI-Si-N coating layers became lower than that of Ti-AI­N coating layers. The friction coefficient decreased with increasing of Si content due to adhesive wear behavior between coating layer and steel ball. On the contrary, in the case of zirconia ball, the friction coefficient increased with increasing of Si content, indicating that abrasive wear behavior was more dominant when the coating layers slid against zirconia ball.