• 환경위생공학
• /
• 제9권2호
• /
• pp.24-31
• /
• 1994

Aerosol size distribution were determined in Seoul by Anderson sampler from October 1989 to September 1991 for the major ionic species(SO$_{4}$$^{2-}$, NO$_{3}$$^{-}$, Cl$^{-}$, Na$^{+}$, Na$^{+}$, K$^{+}$, Ca$^{2+}$ and Mg$^{2+}$) and TSP( Total Suspended Particles ). The seasonal variations in concentrations and size distribution have been investigated. The size distributions of TSP and each of ionic species were bimodal throughout the year. The size distribution of these ions were divided as follows; (1) fine- mode dominant for SO$_{4}$$^{2-}$ and N%'. (2) coarse- mode dominant for NO$_{3}$$^{-}$, Cl$^{-}$, Ca$^{2+}$ and Mg$^{2+}$. (3) both- mode dominant for TSP.

• 한국세라믹학회지
• /
• 제35권7호
• /
• pp.671-678
• /
• 1998

Hertzian indentation tests with sphere indenters were used to study the mechanical properties of glass-in-filtrated alumina and spinel composites and evaluated the effect of preform microstructure and evaluated the effect of preform microstructure and glass con-tents on contanct damage and strength. The spinel composite showed more brittle behavior than the alumina composite which is verified from indentation stress-strain curve cone cracks and quasi-plastic deformation developed at subsurface. Failure originated from either cone cracks(brittle mode) or deformation zone(quasi-plastic mode) above critical load for cracking(Pc) and yield ({{{{ {P }_{Y } }}) with the brittle mode more dominant in the spinels and the quasi-plastic mode more dominant in the aluminas. Even though brittle mode was dominant in the spinel composites the strength degradation from accumulation of damage above these critical loads was conspicuously small suggesting that the glass-infiltrated composites should be highly damage tolerant to the blunt contacts.

• Structural Engineering and Mechanics
• /
• 제63권6호
• /
• pp.799-808
• /
• 2017

Failure of a redundant long-span bridge is often described by innumerable failure modes, which make the structural system reliability analysis become a computationally intractable work. In this paper, an innovative procedure is proposed to efficiently identify the dominant failure modes and quantify the structural reliability for a long-span bridge system. The procedure is programmed by ANSYS and MATLAB. Considering the correlation between failure paths, a new branch and bound operation criteria is applied to the traditional stage critical strength branch and bound algorithm. Computational effort can be saved by ignoring the redundant failure paths as early as possible. The reliability of dominant failure mode is computed by FORM, since the limit state function of failure mode can be expressed by the final stage critical strength. PNET method and FORM for system are suggested to be the suitable calculation method for the bridge system reliability. By applying the procedure to a CFST arch bridge, the proposed method is demonstrated suitable to the system reliability analysis for long-span bridge structure.

• 방송공학회논문지
• /
• 제13권3호
• /
• pp.310-318
• /
• 2008

H.264/AVC는 각 매크로블록에 대해서 최적의 부호화 모드와 참조 프레임을 결정해 주는 RDO (Rate-Distortion Optimization) 기법을 사용하여 기존의 비디오 압축 표준보다 더 좋은 부호화 효율을 얻고 있다. 하지만, RDO 기법은 하나의 매크로블록 모드를 결정할 때마다, 다양한 블록 타입의 화면내 (Intra) 예측을 수행하고 화면간 (Inter) 예측에 대해서도 1/4 화소까지 고려하는 움직임 추정(Motion Estimation)을 수행한 후 발생되는 비트까지 고려하여 최적의 모드를 결정하기 때문에 부호화기의 복잡도가 매우 큰 문제점이 있다. 따라서 영상의 객관적 화질은 유지하면서 부호화기의 복잡도를 낮추기 위한 많은 고속 알고리즘들이 제안되었고 연구 중에 있다. 본 논문에서는, 역 트리 구조의 경계 방향 예측 알고리즘을 이용한 고속 화면내 모드 결정 기법을 제안한다. 제안된 방법은 $4{\times}4$ 블록의 지역 경계 정보를 이용하여 해당 블록의 DE (Dominant Edge)를 찾아내고 DE에 상응하는 화면내 모드를 이용하여 RDO를 수행한다 $8{\times}8$ 블록 (또는 $16{\times}16$ 블록)의 DE는 이전 단계 4개의 $4{\times}4$ 블록 (또는 $8{\times}8$ 블록) DE들로부터 계산되고, 이 단계에서의 RDO 또한 DE에 상응하는 화면내 모드를 이용한다. 실험결과 제안 방법은 화면내 부호화에 사용되는 후보 모드의 수를 줄임으로써 JM12.2와 비교하여 화면내 부호화 시간을 평균 64% 단축시킬 수 있었다.

• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.114-120
• /
• 2000

Friction forces of piston rings for a typical SI engine were independently measured while excluding the effects of cylinder pressure, oil starvation and piston secondary motion using a floating liner system. Friction patterns, represented by the measured friction forces, were classified into five frictional modes with regard to the combination of predominant lubrication regimes(boundary, mixed and hydrodynamic lubrication) and stroke regions(mid-stroke and dead centers). The modes were identified on the Stribeck diagram of the dimensionless bearing parameter and friction coefficients which were evaluated at the mid-stroke and at the dead centers. And the frictional modes were estimated to the full operation range. The compression rings behave in the mode where hydrodynamic lubrication is dominant at the mid-stroke and mixed lubrication is dominant at the dead centers under steady operating conditions. However, the oil control ring behave in the mode where mixed lubrication is dominant throughout the entire stroke.

• 한국대기환경학회지
• /
• 제10권2호
• /
• pp.124-129
• /
• 1994

Aerosol size distribution was determined using Anderson sampler for the anions( sulfate nitrate and chloride ) and TSP. Ionic species concentration and size distribution have been investigated in the daytime and nightime individually. Size classified samples were extracted with distilled water and analyzed for C $l^{[-10]}$ , N $O_3$$^{[-10]}$ and S $O_4$$^{2-}$, by ion chromatography. The size distribution of these ions and TSP was analyzed to investigate the seasonal and diurnal variation of concentrations as follows: (1)Size distribution of TSP showed bi- modal type in the daytime, but indicated tri-mode distribution in the nightime without any seasonal variation. (2)Sulfate concentrations were higher in fine- mode both in the daytime and nightime but fraction of sulfate was higher in coarse-mode during the Yellow Sand Period. (3)Nitrate and Chloride ions are dominant in fine-mode in winter while dominant in coarse-mode in the summer.

• Earthquakes and Structures
• /
• 제11권2호
• /
• pp.245-264
• /
• 2016

A suitable ground motion intensity measure (IM) plays a crucial role in the seismic performance assessment of a structure. In this paper, we introduce a scalar IM for use in evaluating the seismic response of single-layer reticulated domes. This IM is defined as the weighted geometric mean of the spectral acceleration ordinates at the periods of the dominant vibration modes of the structure considered, and the modal strain energy ratio of each dominant vibration mode is the corresponding weight. Its applicability and superiority to 11 other existing IMs are firstly investigated in terms of correlation with the nonlinear seismic response, efficiency and sufficiency using the results of incremental dynamic analyses which are performed for a typical single-layer reticulated dome. The hazard computability of this newly proposed IM is also briefly discussed and illustrated. A conclusion is drawn that this dominant vibration mode-based scalar IM has the characteristics of strong correlation, high efficiency, good sufficiency as well as hazard computability, and thereby is appropriate for use in the prediction of seismic response of single-layer reticulated domes.

• Clinical and Experimental Reproductive Medicine
• /
• 제26권3호
• /
• pp.491-495
• /
• 1999

Objective: To report the pedigree of Kallmann syndrome inherited in autosomal dominant mode with variable expressivity. Material and Method: Case report. Results: The patient had amenorrhea and anosmia but did not have a sign of absolute hypo gonadotropic hypogonadism. Her father had an anosmia and her two elderly sisters also had an anosmia but delivered babies uneventfully. Her two male siblings did not show any signs of hypogonadotropic hypogonadism. Conclusion: Kallmann syndrome has many different modes of inheritance such as autosomal dominant, autosomal recessive, and X-linked form. So the careful investigation of family pedigree is required.

• 한국소음진동공학회논문집
• /
• 제12권2호
• /
• pp.116-123
• /
• 2002

Applying a general coupled lateral and torsional vibration finite element model of gear pair element, this paper intends to look into in detail the coupled lateral and torsional vibration characteristics of a turbo-chiller rotor bearing system, having a bull-pinion speed increasing gear. Investigations have been carried out systematically by comparing the uncoupled and coupled natural frequencies and their mode shapes upon varying the gear mesh stiffness with considerations on rotating speeds, and also by comparing the strain energies of lateral and torsional vibration modes. Results hale shown that some modes may hale the coupled lateral and torsional mode characteristics as the gear mesh stiffness Increases over a certain value, and moreover that their associated dominant modes may be different from their initial modes, j.e., a certain dominant mode may change from an initial torsional one to a lateral one or from an initial lateral one to a torsional one.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.559-564
• /
• 2016

This study examined the malfunction mode of the HCMOS IC under narrow-band high-power electromagnetic wave. Magnetron is used to a narrow-band electromagnetic source. MFR (malfunction failure rate) was measured to investigate the HCMOS IC. In addition, we measured the resistance between specific pins of ICs, which are exposed and not exposed to the electromagnetic wave, respectively. As a test result of measurement, malfunction mode is shown in three steps. Flicker mode causing a flicker in LED connected to output pin of IC is dominant in more than 7.96 kV/m electric field. Self-reset mode causing a voltage drop to the input and output of IC during electromagnetic wave radiation is dominant in more than 9.1 kV/m electric field. Power-reset mode making a IC remained malfunction after electromagnetic radiation is dominant in more than 20.89 kV/m. As a measurement result of pin-to-pin resistance of IC, the differences between IC exposed to electromagnetic wave and normal IC were minor. However, the five in two hundred IC show a relatively low resistance. This is considered to be the result of the breakdown of pn junction when latch-up in CMOS occurred. Based on the results, the susceptibility of HCMOS IC can be applied to a basic database to IC protection and impact analysis of narrow-band high-power electromagnetic waves.