• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.255-263
• /
• 1996

This study was conducted to evaluate the application effects of three different granular fused magnesium phosphate products on soybean in a volcanic ash upland soil(Namweon series) of Cheju island. They were two domestic products(Kyunggi Chemical Industrial Co., LTD, Pungnong Biryo Industrial Co., LTD) and an imported Chinese product that were manufactured from different added materials. A powder fused magnesium phosphate. a single superphosphate(water soluble phosphatic fertilizer) and a fused superphosphate(mixed water soluble phosphate and 2% citric acid soluble phosphate) were presented as check fertilizers. Yield of soybean was the highest in the Pungnong product of granular fused magnesium phosphate. the next was the Chinese product imported and the Kyunggi product was the lowest but there was no statistical significance among the three granular products of fused magnesium phosphate. There was no clear tendency between yield and yield components of soybean plant however, the effects on the number of mainstem nodes, number of branches nodes and number of pods per plant were observed in the increased yield treaments. Phosphate concentration in stems and pods of soybean plant at harvesting stage was higher than those in stems of soybean plant during growing period. Uptake amounts and recovery rates of phosphate in stems and pods of soybean plant at harvesting stage were similar with the yield increasing tendency on soybean. In the changes of soil pH at different periods, the application of phosphatic fertilizers was increased soil pH. Soil pH in Chinese product was higher than domestic products, but it was similar to single superphosphate. The available silicate concentrations of soil were higher in the plot of Pungnong product than Chinese product.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.681-687
• /
• 2013

Free Trade Agreement(FTA) aims at abolishing tariffs on trade among nations or regions resulting in having a significant impact on maritime transportation and port. Korea made the first FTA with Chile in 2004 and the trade volume between two countries has seen significant increase. The literature on such impact, however, seems to be very limited. The main purpose of this study is, therefore, to analyze the impact of Korea-Chile Free Trade Agreement on the imported container throughput from Chile at the Busan Port. For this both cross-sectional and time series data are collected that comprise container throughput, Gross Domestic Product (GDP), import tariff, and maritime freight rate, from 2000 to 2011, and the gravity model is applied. The main result of the study shows that the dependent variables, GDP and import tariff are statistically significant, but the maritime freight rate is not consistent with regarding to statistical significance and parameter sign.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1997.06a
• /
• pp.207-231
• /
• 1997

The use household water purifier is continuously increasing due to the distrust of the piped, rap water, which may be caused by the deterioration of water quality and water supply facilities in Korea. The water purifier distributing in the domestic market is the membrane type that composes of membrane as a basic filter, sediment filter as a prefilter and activated carbon filter instead of one purifying water system. The membrane type using as a water cleaning system is mainly the method of micro filtration(NIF) as well as ultra filtration(UF) and reverse osmosis(RO). The types of MF and UF are using to remove suspended solids and virus, and RO is using to remove ionic compound in chemical organic compounds. At the beginning the household water purifier was imported as end-product or assembled by only importing module from small businesses in Korea. Therefore, people was hard to confide in the product quality because the sales policy and management of water purifier by small business were not effectively organized. However, the defects of water purifier having up to now ate improving by the efforts of special branches of water purifier and large enterprises, and new great products are developing and producing. To develop the best quality product of water purifier in Korea, it should be considered seasonal water characteristrics rather than any other condition. For example, the water purifier can be affected by the water temperature change, increase of suspended solids in the rainy season and inflow of raw water having concentration in a dry season. The subject we have to investigate in the future is to develop the water purifying system adaptable in Korea which can treat the water quality using close analyses of local and seasonal water characteristics.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.1
• /
• pp.247-253
• /
• 2018

To replace the imported biomass and to effectively cope with growing RPS(Renewable Portfolio Standard) in power sector, the domestic forest biomass resources for wood pellets were estimated from the preceding research and annual growth rate of forest trees in this study. Assuming that 20% of the by-product from forest trees processing were used as raw material for wood pellet and the wood pellet production capacity was based on the average value derived from the above two methods, unused by-product and residues generated 1.99million tons in 2016, 2.28million tons in 2020 and 3.08million tons in 2030. If 20% of by-products(pebbles, sawdust, etc.) from roundwood processing were used as raw material for wood pellets, the wood pellet could be produced 2.74million tons/year in 2016, 2.95million tons/year in 2020, 3.98million tons/year in 2030. Therefore, total amounts of wood pellet would be increased to 2.74million tons/year in 2016, 3.14million tons/year in 2020, 4.23million tons/year in 2030 when it considered unused by-product and residues from wood processing as raw materials.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1999.06a
• /
• pp.359-365
• /
• 1999

We have evaluated the performance and some physical properties of 25 automotive engine oils (21 domestic and 5 imported products) which are purchased on the market to verify the API(American Petroleum Institute) or ILSAC(International Lubricant Standardization and Approval Committee) certification marks attached on the products and to determine the necessity of the quality control of the engine oils on the market. 12 test items are chosen according to API engine oil specification, which are flash point, pour point, cold cranking simulator apparent viscosity, pumping viscosity, gelation index, HTHS(High Temperature High Shear viscosity), foam, high temperature foam, filterability, volatility, high temperature deposit(TEOST), phosphorus content. We have found one product which did not meet the API specification on gelation index, one on HTHS, four on foam, and one on volatility, which implies that the quality control system is in need to check the fidelity of the certification marks attached on the engine oils being marketed. In addition, this works raises the necessity of the upgrade of the present Korean engine oil specification.

• Journal of Environmental Impact Assessment
• /
• v.8 no.4
• /
• pp.25-35
• /
• 1999

Fly ash, by-product from coal fired power station, has long been regarded as a potential contamination source for heavy metals and inorganics due to their enriched concentrations and associations with particle surface. Feed coal and fly ash samples were collected from two power stations; Yongdong deliang with domestic anthracite coals and Boryong with imported bituminous coals. The coal and fly ash samples were analyzed for chemical composition and mineral components, using XRF and XRD. Batch leaching experiments were conducted by agitating samples with deionised water for 24 hours. Anthracite coals are generally higher in Al and Si contents than bituminous coals. This is due to the higher ash contents of the anthracite coal than bituminous coal. The chemistry of the two fly ash samples shows broadly similar compositions each other, except for the characteristically high contents of Cr in anthracite coal fly ash. Leaching experiments revealed that concentrations of metals gradually decreased with leachings in general. However, measurable amounts of metals were present in the effluent from weathered ash and the samples subjected to the leaching procedure. These metals are likely to indicate that the metals in fly ash were incorporated into glass fraction as well as associated with particle surface of samples. Dissolution of aluminosilicate glass would control releasing heavy metals from fly ash as weathering progresses during landfill with implication of possible groundwater contamination through fly ash landfill.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.5
• /
• pp.43-52
• /
• 2017

Purpose - The domestic liquor market is steadily increasing, but locally made liquor markets remain stagnant. The market opening due to the FTA and westernized eating habits are expanding the consumption of imported liquor by Koreans and the demand for beer and soju is still high. Therefore, we analyzed the scale efficiency of Korean locally made liquor companies. Research design, data, and methodology - Based on a translog-cost function, a scale efficiency analysis was conducted using the government's information survey on the liquor industry. Data from 541 liquor companies analyzed from 2013 to 2014 were used for analysis. Results - As a result of the scale efficiency analysis, the average sales of the mid-sized locally made liquor companies is 171 million won, but the appropriate sales amount is 1 million won. It is estimated that there is a need to increase sales. Conclusions - The gap between the actual sales and the appropriate sales of mid-sized locally made liquor companies with 3~10 employees is larger, so it is necessary to reduce the average cost by increasing the sales of locally made liquor companies. In order to do so, it is necessary to acquire customer strategies such as product differentiation, advertising and publicity.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.6
• /
• pp.37-45
• /
• 2014

Ball valves are used as a key element in the process industries. The industrial development of valves has increased steadily, but continued improvement requires high design reliability and long service life. Currently, the development of high performance valves is not easy because of the lack of relevant technology in Korea. Valves are being imported at a level of up to 58 percent of the domestic market, which represents a value of almost 7 million US dollars. Therefore, in this work, the improvement of the design and performance of industrial valves has been studied in an attempt to achieve valves that will have longer service life and better output during operation. The structural stability was evaluated using the ANSYS FSI (Fluid-Structural Interaction) module. Moreover, to obtain maximum product reliability, torque analysis simulation was performed to compare and experimental results. The simulation results were used to predict the change in torque by changes in shape, thereby reducing the time and cost of manufacturing a number of prototypes for experimental validation.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.289-297
• /
• 2018

The vehicle lubricant has captured 35% of the total lubricant market while the engine oil possessed 77% of the vehicle lubricant market in Korea. The suitable quality management of circulating engine oil is thus required for the driver and engine protection. But, KS and synthetic engine oil products (containing over 30% synthetic oil) are exempt to any quality inspections under Petroleum and Alternative Fuel Business Act. In this study, our research group investigated the quality monitoring of 30 kinds of domestic distributing synthetic engine oils. Two kinds of the engine oil showed an off specification from the test results; one engine oil is an imported and the other is a KS synthetic one. Also, the pattern of engine oils were analyzed using SIMDIST (simulated distillation) and the most engine oils had a broad carbon number spectrum, which is a typical of mineral oils except several imported products. Thus, we concluded that relevant laws for the proper quality management of synthetic oils and KS products are needed to be established for preventing consumer's damages.

• The Korean Journal of Pesticide Science
• /
• v.2 no.1
• /
• pp.65-69
• /
• 1998

To determine the amount of total bromide as 2-bromoethanol, the domestic agricultural products such as rice, barley, carrot, cucumber, apple, tomato, squash, green pepper, melon, strawberry, grape, peach, potato and celery were analyzed by GC/MSD as well as GC/ECD. The bromide was detected in most of the domestic samples and the highest bromide residue determined was 13.2 ppm in barley. The imported agricultural products including melon, kiwi, lemon, pineapple, banana, orange and grape were also analyzed for the bromide. The bromide was also detected in most of the imported ones and the highest bromide residue determined was 12.3 ppm in pineapple. In addition, the bromide residue in instant noodle spices was monitored for 4 years, recently. As results, in 1994, the bromide content was in the range of non-detection to 2.4 ppm (average 1.1 ppm) from 22 out of 24 samples; in 1995, the bromide content was 1.0 and 2.2 ppm from 2 out of 37 samples; in 1996, the bromide content was in the range of 0.7 to 37 ppm (average 12.4 ppm) from all 11 samples; and in 1997, the bromide content was in the range of 0.2 to 4.6 ppm (average 1.2 ppm) from all 59 samples. However, none of sample analyzed for the bromide was exceeded Maximum Residue Limit(s) of Korea and Codex in these survey.