• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.289-293
• /
• 2007

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

• 소성∙가공
• /
• 제11권1호
• /
• pp.54-60
• /
• 2002

The purpose of the present paper is to investigate the effect of Process parameters such as internal pressure, amount of axial feeding, and frictional condition between the die and the material on the tube hydro-formability. For carbon steel tubes(STKM 12A, STBH 410 and SPS 290), simple bulging, circular bulging and Tee-fitting tests are performed to evaluate the hydro-formability of these materials which is determined by deformation characteristics such as thickness distribution, forming height and branch dome shape. The formabilities obtained from these tests are analysed and compared with the results of the numerical simulation.

• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.364-369
• /
• 2007

The effect of temperature on the forming limit diagram was investigated for AZ31B magnesium alloy sheet through the limit dome height test in the range from room temperature to $300^{\circ}C$. The formability of AZ31B sheet was improved significantly according to the increasing temperature. Also we studied the springback characteristics through the 2D draw bending test with different blank holding forces at elevated temperatures. Springback quantity was considerably reduced as temperature went up. The blank holding force in the range used, however, had little influence on springback. Experimental results obtained in this study may provide a material database for AZ31B sheet.

• 소성∙가공
• /
• 제9권4호
• /
• pp.379-388
• /
• 2000

This study aims to examine the influence of experimental and numerical factors on the results of the test and finite element simulation to evaluate the formability of sheet metals. The stretch-forming test with a hemispherical punch is carried out to obtain the limiting dome height (LDH) and forming limit diagram (FLD) for several kinds of aluminium and steel sheet. The results of the LDH and FLD tests are analysed to find any correlation with the uniaxial tensile properties. It proves that the size of the prescribed grid has great influence on the measured value of strain. The finite element analysis of the punch stretching process is also carried out and the result is compared with the experimental data. The influence of the numerical parameters such as friction coefficient, element size and anisotropy model on the simulation results tms out to be very considerable.

• 소성∙가공
• /
• 제5권4호
• /
• pp.343-352
• /
• 1996

One of the preferred methods that can be used to verify the results of finite element analysis is to measure surface strains of the deformed part for purpose of direct comparison with simulation results. Instead of using the usual manual method the vision-based measurement method is capable of determining surface geometry and strain from the deformed grid pattern automatically with the help of a computer. To obtain strain distribution over an area, the coordinates of such a surface grid are determined from the multiple video images by applying the photogrammetry principle. Methods to improve the overall accuracy of the vision-based strain measurement system are explored and the possible accuracies that can be attained by such a measurement method are discussed. A major emphasis is placed on the initial grid application method its accuracy and ease of subsequent image processing. Finite element analyses of limiting dome height(LDH) test are carried out and the results of them are compared with exsperimen-tal data.

• 한국공간구조학회논문집
• /
• 제24권2호
• /
• pp.101-109
• /
• 2024

In this study, the characteristics of wind pressure distribution on circular retractable dome roofs with a low rise-to-span ratio were analyzed under various approaching flow conditions by obtaining and analyzing wind pressures under three different turbulent boundary layers. Compared to the results of previous studies with a rise-to-span ratio of 0.1, it was confirmed that a lower rise-to-span ratio increases the reattachment length of the separated approaching flow, thereby increasing the influence of negative pressure. Additionally, it was found that wind pressures varied significantly according to the characteristics of the turbulence intensity. Based on these experimental results, a model for peak net pressure coefficients for cladding design was proposed, considering variations in turbulence intensity and height.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.125-132
• /
• 2018

The biggest impact on the cladding design of buildings is wind loads. Wind tunnel tests were conducted to examine the applicability of current wind load standards about membrane retractable roof spatial structure. A dome model with a circular shape that is retractable to the center of the dome was made (Opening ratio = 0, 10, 30, 50). In addition, height adjustable turntables were made and tested with five patterns with H/D = 0.1, 0.2, 0.3, 0.4 and 0.5. The maximum wind pressure coefficient and the minimum wind pressure coefficient for the cladding were analyzed and the experimental wind pressure coefficient were compared with the current wind load standards, KBC2016 and AIJ-RLB(2015). The experimental value and the reference value of the enclosed roof were very similar and showed possibility of application, but opened roof case was found that the reference value was underestimated.

• 한국지구과학회지
• /
• 제33권7호
• /
• pp.627-636
• /
• 2012

강원도 고성군 오봉리에는 6개의 화산체(뒤배재, 오음산, 갈미봉, 249 m 고지, 166 m 고지, 102 m 고지)가 밀집하여 분포하고 있다. 그리고 고성산 화산체와 운봉산 화산체가 단독으로 멀리 떨어져 있다. 오봉리의 249 m 고지 화산체는 이 연구에서 새롭게 발견된 것이며, 오봉리에 분포하는 6개의 화산체들을 오봉리 화산체군이라 명명한다. 이 지역 화산체는 여러 연구자에 따라 화산전, 플러그 돔, 원통형 화산통 등으로 해석된다. 이 연구는 화산체의 형태, 화산분출물의 층서 및 특징을 바탕으로 화산활동 양상과 화산체의 형성과정을 알아보았다. 이 지역의 모든 화산체는 중생대 화강암 위에 현무암류가 분포하고, 기반암에서 상부로 갈수록 산사면의 경사도가 증가하는 돔 형태이다. 특히 3개의 화산체(뒤배재, 166 m 고지, 102 m 고지)에서는 현무암과 기반암 사이에 화성쇄설층이 발견된다. 뒤배재 화산체의 화성쇄설층에서는 기반암 기원으로 추정되는 석영, 장석 및 화강암편과 화산분출물인 스코리아 암편이 분포한다. 그리고 모든 화산체의 현무암내에는 맨틀포획암과 기반암인 화강암류와 하부지각 기원의 반려암류의 포획암을 함유한다. 또한 각진 형태의 감람석, 사장석, 휘석 등의 포획광물이 있다. 이러한 사실은 마그마가 지표로 빠르게 상승하였고, 화산활동이 폭발적이었음을 지시한다. 또한 현무암내의 다량의 포획광물 등은 현무암질 마그마의 점성을 증가시켜 돔형의 화산체를 형성한 것으로 판단된다. 그리고 화산체가 오랜 시간 동안의 삭박작용을 거쳐 원지형이 파괴되면서, 돔의 심부가 기반암 위에 플러그 돔으로 남게 된 것으로 해석된다.

• 암석학회지
• /
• 제26권1호
• /
• pp.83-91
• /
• 2017

본 연구에서는 제주도에서 화산분화에 의해 발생 가능한 화쇄류의 영향 범위를 파악하기 위하여 백록담 외륜산 외측 사면 8개 지점에서 새로운 용암돔이 발생하는 것을 가정하고 이 과정에서의 붕괴로 발생 가능한 화쇄류를 수치모의 하였다. 수치모의에는 TITAN2D 수치모의 프로그램을 사용하였다. TITAN2D프로그램에서 화쇄류 흐름의 속도를 제어하는 변수로 사용되는 내부마찰각과 층저마찰각 중 내부마찰각을 $30^{\circ}$, 층저마찰각을 $20^{\circ}$로 설정하였다. 붕괴되는 돔의 높이와 반경, 초기 붕괴 속도, 수치모의 시간 등을 선정하여 총 96개 시나리오에 대하여 수치모의를 실시하였다. 수치모의 결과 돔 붕괴에 의한 화쇄류는 최대 13.4 km까지 도달하여 한라산 정상부 및 제주시와 서귀포시까지 도달하는 것으로 나타났다. 본 연구를 통해 구축된 시뮬레이션 자료들을 이용하여 제주도의 화산 분화 시 발생 가능한 화쇄류의 피해범위 DB를 구축하고 이를 기반으로 재해도를 작성하여 화쇄류로 인한 피해를 최소화하는데 활용할 수 있을 것으로 기대된다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.141.2-141.2
• /
• 2005