• Journal of Korean Association for Spatial Structures
• /
• v.20 no.4
• /
• pp.149-158
• /
• 2020

The governing equation for a dome-type shallow spatial truss subjected to a transverse load is expressed in the form of the Duffing equation, and it can be derived by considering geometrical non-linearity. When this model under constant load exceeds the critical level, unstable behavior is appeared. This phenomenon changes sensitively as the number of free-nodes increases or depends on the imperfection of the system. When the load is a periodic function, more complex behavior and low critical levels can be expected. Thus, the dynamic unstable behavior and the change in the critical point of the 3-free-nodes space truss system were analyzed in this work. The 4-th order Runge-Kutta method was used in the system analysis, while the change in the frequency domain was analyzed through FFT. The sinusoidal wave and the beating wave were utilized as the periodic load function. This unstable situation was observed by the case when all nodes had same load vector as well as by the case that the load vector had slight difference. The results showed the critical buckling level of the periodic load was lower than that of the constant load. The value is greatly influenced by the period of the load, while a lower critical point was observed when it was closer to the natural frequency in the case of a linear system. The beating wave, which is attributed to the interference of the two frequencies, exhibits slightly more behavior than the sinusoidal wave. And the changing of critical level could be observed even with slight changes in the load vector.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.262-271
• /
• 2021

Communication among epididymal epithelial cells creates the best luminal condition where spermatozoa mature, transport and are stored. Vacuolar ATPase (V-ATPase) and cytokeratin 5 (KRT5) have been used as signal indicators for clear and basal cells of the epididymal epithelium, respectively, in mice, rats, bats, and pigs; however, these two markers have not yet been described in the epididymis of bulls. Here, we examined the presence and distribution of the B1 subunit of V-ATPase (B1-VATPase) and KRT5 in the distinct regions of adult bovine epididymides, specifically, the caput, corpus, and cauda. Immunofluorescence staining and confocal microscopy showed that narrow shaped-clear cells were placed in the caput and corpus regions of the bovine epididymis; however, they were absent in the cauda epididymis. In addition, B1-VATPase was highly expressed in the cauda spermatozoa; however, it was rarely detected in the caput spermatozoa. On the other hand, KRT5-positive cells, basal cells, were maintained beneath the basal lamina and they had the traditional form with a dome-shaped morphology from the caput to cauda region of the bovine epididymis. The co-expression of B1-VATPase and KRT5 was confined to basal cells placed in the basal region of the epithelium. In summary, 1) clear cells were present with region-specific localization, 2) B1-VATPase was present in the corpus and cauda spermatozoa but absent in the caput, 3) co-expressed cells with B1-VATPase and KRT5 were present in the adult bovine epididymis, and 4) B1-VATPase was not a specific marker for clear cells in the bovine epididymis. Therefore, the perfect epididymal luminal condition created by the specific expression and localization patterns of B1-VATPase might be necessary to obtain fertilizing capacity of spermatozoa in the bovine epididymis.

• Journal of Environmental Impact Assessment
• /
• v.31 no.5
• /
• pp.334-342
• /
• 2022

The stringent air environment conservation act forced to build an indoor dome for coal storage. However, it causes some problems due to accumulation of fly ash and harmful substances inside. To solve this problem, this study analyzed the pattern of internal airflow and the amount of ventilation for an indoor coal yard. Overall, the airflow inside the indoor coal yard tended to move to the southwest facing the mountain. In addition, sea-breeze was blowing from the northern louver window facing the sea, where airflow was flowing in. The total flow rate flowing into the indoor coal yard was 918,691 m³/h, and the number of natural ventilation per hour was 0.6 times. Therefore, it is proposed to install a forced ventilation device at the location where internal air flow is concentrated.

• Journal of architectural history
• /
• v.31 no.4
• /
• pp.71-86
• /
• 2022

This study examines the process of the introduction of stupa, which has originated in India, to the Xinjiang Uyghur region and the features of the stupas in the Xinjiang Uyghur region in detail. This study examines the layout of the buildings in temple compounds and the types, structural elements, and construction methods of the stupas in the Xinjiang Uyghur region in particular by looking into the content of the Da Tang Xi Yu Ji and remaining stupas, which provide examples of stupas at the time. This study finds that due to the characteristics of dry deserts, stupas in Xinjiang Uyghur region, where assimilation between Eastern and Western cultures is seen, were mostly made by pressing clay into a mold and had no interior spaces. Also, construction materials and techniques had been developed and improved in a way that enabled stupas to combat the challenging desert conditions. However, the stupas in this region differed significantly from the wooden tower-like stupas discovered in central China(zhongyuan 中原). The shape of the dome of most stupas in Xinjiang Uyghur region was chosen under the influence of the Gandharan style. Some of the stupas in the region have taken the general forms of the wooden stupas and the others have taken many forms, from cylindrical drums to towers. Also, there have been forests of stupas and stupas similar in form to chaityas and stupas of Vajrayana. Such different forms were transformed and modified through regional history and it was related to the peoples and cultures that produced and used stupas. Stupas evolved into distinct forms in Xinjiang Uyghur region in this way.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.42-52
• /
• 2022

North Korea continues to upgrade and display its long-range rocket launchers to emphasize its military strength. Recently Republic of Korea kicked off the development of anti-artillery interception system similar to Israel's "Iron Dome", designed to protect against North Korea's arsenal of long-range rockets. The system may not work smoothly without the function assigning interceptors to incoming various-caliber artillery rockets. We view the assignment task as a dynamic weapon target assignment (DWTA) problem. DWTA is a multistage decision process in which decision in a stage affects decision processes and its results in the subsequent stages. We represent the DWTA problem as a Markov decision process (MDP). Distance from Seoul to North Korea's multiple rocket launchers positioned near the border, limits the processing time of the model solver within only a few second. It is impossible to compute the exact optimal solution within the allowed time interval due to the curse of dimensionality inherently in MDP model of practical DWTA problem. We apply two reinforcement-based algorithms to get the approximate solution of the MDP model within the time limit. To check the quality of the approximate solution, we adopt Shoot-Shoot-Look(SSL) policy as a baseline. Simulation results showed that both algorithms provide better solution than the solution from the baseline strategy.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.5
• /
• pp.303-308
• /
• 1994

Shoot apical meristem dome explants from cassava plants (Ghanaian local variety) produced somatic embryos at a frequency of 32% when cultured on MS medium supplemented with 2 mg/L 2,4-D. Somatic embryo segments formed secondary embryos at frequencies of up to 93% when cultured on medium containing 1 mg/L 2,4-D for 2 to 3 weeks. Since the somatic embryos were not capable of converting into plantlets, adventitious shoot were induced from the sliced embryo segments by culturing them on medium containing 0.1 to 5 mg/L BA. After 8 weeks of culture, numerous shoots formed on the segments at frequencies up to 100%. The shoots were rooted and successfully transplanted to potting soil.

• Journal of Korean Neurosurgical Society
• /
• v.66 no.4
• /
• pp.418-425
• /
• 2023

Objective : Deciphering the anatomy of posterior communicating artery (PCoA) aneurysms in relation to surrounding structures is essential to determine adjuvant surgical procedures. However, it is difficult to predict surgical structures through preoperative imaging studies. We aimed to present anatomical structures using preoperative high-resolution three-dimensional proton density-weighted turbo spin-echo magnetic resonance (PDMR) imaging with simple classification. Methods : From January 2020 to April 2022, 30 patients underwent PDMR before microsurgical clipping for unruptured PCoA aneurysms in a single tertiary institute. We retrospectively reviewed the radiographic images and operative data of these patients. The structural relationship described by PDMR and intraoperative findings were compared. Subsequently, we classified aneurysms into two groups and analyzed the rate of adjuvant surgical procedures and contact with the surrounding structures. Results : Correlations between preoperative PDMR predictions and actual intraoperative findings for PCoA aneurysm contact to the oculomotor nerve, temporal uncus, and anterior petroclinoid fold (APCF) reported a diagnostic accuracy of 0.90, 0.87, and 0.90, respectively. In 12 patients (40.0%), an aneurysm dome was located on the plane of the oculomotor triangle and was classified as the infratentorial type. Compared to the supratentorial type PCoA aneurysm, adjuvant procedures were required more frequently (66.7% vs. 22.2%, p=0.024) for infratentorial type PCoA aneurysm clipping. Conclusion : Preoperative PCoA aneurysm categorization using PDMR can be helpful for predicting surgical complexity and planning of microsurgical clipping.

• Journal of Korean Foot and Ankle Society
• /
• v.27 no.4
• /
• pp.148-153
• /
• 2023

Traditionally, arthroscopic microfracture and autologous osteochondral autograft transplantation have been the primary surgical treatments for osteochondral lesions of the talus. On the other hand, recent advancements have introduced alternative approaches, such as autologous chondrocyte transplantation, matrix-derived autologous chondrocyte transplantation, intra-articular injection of concentrated bone marrow aspirate concentrate, and the use of fibrin glue to address chondral defects. Furthermore, some studies have explored a combination of bone marrow aspirate and matrix-derived chondrogenesis. In light of these developments, this report presents a case study of a young male patient in his early twenties with a relatively large osteochondral lesion exceeding 1.5 cm² on the medial talar dome. Instead of removing the osteochondral lesion, a surgical approach was employed to retain the lesion while addressing the unstable cartilage in the affected area. This approach involved a combination of bone marrow aspirate concentrate and matrix-derived chondrogenesis. The treatment yielded favorable clinical outcomes and ultimately successfully induced the bony union of osteochondral lesions. This paper reports the author's experience with this innovative approach with a review of the relevant literature.

• Journal of the Korean Institute of Rural Architecture
• /
• v.26 no.2
• /
• pp.37-46
• /
• 2024

The city is developing into a smart city. Smart villages and smart farms are developing in rural areas. Architectural technology needs synergy with smart cities, smart villages, and smart factories (intelligent factories) to help architectural experts understand smart farms and build facilities and equipment. Smart farms require design and construction technology with architectural structure and function. The purpose of this study was to investigate the current status and cases of smart farms in Korea and to investigate cases abroad. The conclusion is as follows. ① Smart farms are developing rapidly. The Korean government is expanding smart farms by utilizing ICT technology and infrastructure. ② 'Smart Farm Innovation Valley', which has been promoted since 2018, is a cutting-edge convergence cluster industrial complex that integrates production, education, and research functions such as start-ups and technological innovation. ③ In domestic cases, smart farms are operated in subway stations, buildings, supermarkets, and restaurants. ④ In the Japanese case, a dome-type smart farm was being operated. It utilized factory wastewater, waste heat, renewable energy, and used new materials. Otemachi Ranch raised livestock and provided a lounge on the 13th floor of the building. ⑤ In the cases of Korea and Japan, the smart farm technology is very similar. As stated earlier, since the food culture and agricultural technology of both countries are similar, we hope to promote the development of smart farms that can reduce concerns about future food by communicating and sharing mutual technologies.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.2
• /
• pp.318-328
• /
• 2024

In this study, we enhanced the emulsifying power and solubilization of sucrose stearate (SS) by creating mixtures with sodium deoxycholate (SDOC) and PEG-40 hydrogenated castor oil (HCO). We employed the design of mixture experiments (DOME) methodology to identify the optimal composition of the mixture, and the impact of varying the mixture composition on its characteristics was examined through regression analysis of the experimental data. It was revealed that the emulsifying power for coconut oil was most improved when only SDOC was added to SS, and solubilization was most improved when only HCO was added, while the emulsifying power for cetyl ethylhexanoate (CEH) was most significantly improved when SDOC and HCO were added together. As a result of simultaneous optimization of three characteristics, emulsifying power for each of coconut oil and CEH, and solubilization, the optimal surfactant mixture composition was determined as SS 0.7939, SDOC 0.0586, and HCO 0.1475.