• Economic and Environmental Geology
• /
• v.43 no.4
• /
• pp.349-358
• /
• 2010

For imaging complex subsurface structures such as salt dome, faults, thrust belt, and folds, seismic prestack reverse-time migration in depth domain is widely used, which is performed by the cross-correlation of shot-domain wavefield extrapolation with receiver-domain wavefield extrapolation. We apply the prestack reverse-time migration, which had been developed at KIGAM, to the seismic field data set of Block 5 in Jeju basin of Korea continental shelf in order to improve subsurface syncline stratigraphy image of the deep structures under the shot point 8km at the surface. We performed basic data processing for improving S/N ratio in the shot gathers, and constructed a velocity model from stack velocity which was calculated by the iterative velocity spectrum. The syncline structure of the stack image appears as disconnected interfaces due to the diffractions, but the result of the prestack migration shows that the syncline image is improved as seismic energy is concentrated on the geological interfaces.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.77-77
• /
• 2018

Panel level packaging (PLP) 공정은 차세대 반도체 패키징 기술로써 wafer level packaging 대비 net die 면적이 넓어 생산 단가 절감에 유리하다. PLP 공정에 적용되는 구리 재배선 층 (RDL, redistribution layer)은 두께 불균일도에 의해 전기 저항의 유동이 민감하게 변화하기 때문에 RDL의 두께를 균일하게 형성하는 것은 신뢰성 측면에서 매우 중요하다. 구리 RDL은 주로 도금 공정을 통해 형성되며, 균일한 도금막 형성을 위해 도금조에 평탄제를 첨가하여 도금 속도를 균일하게 한다. 도금막에 대한 흡착은 주로 평탄제의 imine 작용기에 포함된 질소 원자가 관여하며, imine 작용기의 4차화에 의한 평탄제의 흡착 정도를 제어하여 평탄제 성능을 개선할 수 있다. 본 연구에서는 도금 평탄제에 포함된 imine 작용기의 질소 원자를 4차화하여 구리 RDL의 도금 두께 불균일도를 제어하고자 하였다. 유기첨가제와 4차화 반응을 위해 알킬화제로써 dimethyl sulfate의 비율을 조절하여 각각 0, 50, 100 %로 4차화 반응을 진행하였다. 평탄제의 4차화 여부를 확인하기 위해 gel permeation chromatography (GPC) 분석을 실시하였다. 도금은 20 ~ 200 um의 다양한 배선 폭을 갖는 구리 RDL 미세패턴에서 진행하였으며, 4차화 평탄제를 첨가하여 광학 현미경과 공초점 레이저 현미경을 통해 도금막 표면과 두께에 대한 분석을 실시하였다. GPC 분석을 통해 4차화 반응 후 알킬화제에 의해 나타나는 GPC peak이 감소한 것을 확인하였다. 광학 현미경 및 공초점 레이저 현미경 분석 결과, 4차화된 질소 원자가 존재하지 않는 평탄제의 경우, 도금 시 도금막의 두께가 불균일하였으며 단면 분석 시 dome 형태가 관찰되었다. 또한 100 % 4차화를 실시한 평탄제를 첨가하여 도금 한 경우 마찬가지로 두께가 불균일한 dish 형태의 도금막이 형성되었다. 반면, 50 % 4차화를 적용한 평탄제를 첨가한 경우, 도금막 단면의 형태는 평평한 모습을 보였으며 매우 양호한 균일도를 가지는 것으로 확인되었다. 이로 인해 imine 작용기를 포함한 평탄제의 4차화 반응을 통해 구리 RDL의 단면 형상 및 불균일도가 제어되는 것을 확인하였으며, 4차화된 imine 작용기의 비율을 조절하여 높은 균일도를 갖는 구리 RDL 도금이 가능한 것으로 판단되었다.

• Horticultural Science & Technology
• /
• v.32 no.5
• /
• pp.623-627
• /
• 2014

Curcuma alismatifolia is becoming popular for cut flowers and potted plants due to its long inflorescence with many showy pink flowers. It is propagated by rhizomes and inflorescences that are similar to those of lotus. However, initiation of inflorescence development of each bract and flower has not been investigated. Therefore, this experiment was conducted to study the inflorescence development of Curcuma alismatifolia 'Chiangmai Pink' by scanning electron microscopy (SEM). When new shoots grew to 15-20 cm in a greenhouse at $25^{\circ}C$, the first bract initiated with a dome-shaped inflorescence apex, followed by initiation of additional bracts, forming the shape of the flower head. Florets were subtended by the first bract when five to seven bracts were formed. Four to six florets were subtended by each bract. The floret positioned in the center initiated and progressed upward first. When the center florets in the upper bracts were formed, florets next to the center floret subtended by the first bract were formed, and formation of the axillary florets progressed upward in sequential order.

• Journal of Fashion Business
• /
• v.2 no.3
• /
• pp.55-72
• /
• 1998

The purpose of this study is for consideration of the flapper fashion (1924-1928) in Jazz Age (1919-1929) of America and the influences of it on modern fashion. This study is started from the latest fashion trend which is pursuing it's inspiration into the Jazz Age, the 20s. The etimology of 'flapper' was based on mines is 'flap' such as 'flutter of skirt hemline', 'hands', 'arms', 'wings' and a slang which was applied to young women from 1830. In 20th century it has meant not only new American women but also their fashion and attitude. The designs of flapper fashion were expressed by simplicity, functionality, nudity and rhythm. Simplicity was the best value of this time and the simple image was considered the smartest. Functionality was represented by straight boyish style and loose baggy silhouette that was related to free dome. Nudity was expressed by revealing of legs, arms, backs in shapes and see-through by materials. It was related to sexual attraction and point to youth. Rhythm of flapper fashion expressed optical effect of movement. Using of light material was deep related to freedom of flappers, speed, rhythmical Jazz and dancing. The influences of flapper fashion were giving an opportunity that changed fashion leader from high class to young popular group and simple design of flapper fashion effected to modernization and popularization of American apparel business. And it influenced American casual fashion which was known as brightness, youth and openhearted mood. So flapper fashion can be reganded as the starting point of the street fashion of the 20th century.

• Journal of Surface Science and Engineering
• /
• v.42 no.3
• /
• pp.133-138
• /
• 2009

Effects of bipolar pulse driving frequency between 50 kHz and 250 kHz on the discharge shapes were analyzed by measuring plasma characteristics by OES (Optical Emission Spectroscopy) and Langmuir probe. Plasma characteristics were modeled by a simple electric field analysis and fluid plasma modeling. Discharge shapes by a continuous dc and bipolar pulsed dc were different as a dome-type and a vertical column-type at the cathode. From OES, the intensity of 811.5 nm wavelength, the one of the main peaks of Ar, decreased to about 43% from a continuous dc to 100 kHz. For increasing from 100 kHz to 250 kHz, the intensity of 811.5 nm wavelength also decreased by 46%. The electron density decreased by 74% and the electron temperature increased by 36% at the specific position due to the smaller and denser discharge shape for increasing pulse frequency. Through the numerical analysis, the negative glow shape of a continuous dc were similar to the electric potential distribution by FEM (Finite Element Method). For the bipolar pulsed dc, we found that the electron temperature increased to maximum 10 eV due to the voltage spikes by the fast electron acceleration generated in pre-sheath. This may induce the electrons and ions from plasma to increase the energetic substrate bombardment for the dense thin film growth.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.3
• /
• pp.186-190
• /
• 2003

Kaposi's sarcoma was first descrided by Kaposi in 1872 as an idiopathic multiple hemorrhagic sarcoma. Its clinical features revealed to be erythematous red or purple macule started out, and developing into palpable dome-shaped nodules. Etiology is not defined to detail at present. Kaposi's sarcoma is classified to 4 categories; Classical, African, Epidemic and Transplant type. Epidemic or AIDS categories is found approximately 20 % of all AIDS and has strong predilection for head and neck region. The first case of Kaposi's sarcoma observed in patients with kidney transplants was reported in 1969. Kaposi's sarcoma now accounts for 5% of all tumors associated with transplanted patients and alteration of the immunosuppression may have played a key role in these recipients. The most common site of Kaposi's sarcoma in transplanted patients are extremities but rare in head and neck area. We report a case of Kaposi's sarcoma on the hard palate in the kidney transplantation patient.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.3
• /
• pp.75-80
• /
• 2010

The present study tried to provide useful data for the acoustic design of sound amplification system with measuring and analyzing subjective preference and intelligibility by varying the number of speakers and their directivity. The results suggest that the room absorption plays a key role in subjective responses of listeners and the large sound absorption of ceiling contributes to the increase of intelligibility. Also, larger number of speakers with narrow directivity improves perceived intelligibility when speakers were installed at the lower height. However, the highest degree of intelligibility and preference were obtained when speakers were installed close enough to the sound absorptive ceiling. The highest intelligibility and preference were observed when 8 to 10 speakers with the directivity of 60 degree were used.

• Korean Journal of Remote Sensing
• /
• v.34 no.1
• /
• pp.101-115
• /
• 2018

The Long Valley area and its surroundings are part of a major volcano system where inflation occurred in the resurgent dome in the 1990s. We used ENVISAT data to monitor surface deformation of the Long Valley area and its surroundings after the inflation, from 2003-2010. To retrieve the time series of the deformation, we applied the refined Small BAseline Subset (SBAS) algorithm which is improved using an iterative approach to minimize unwrapping error. Moreover, ascending and descending data were used to decompose the horizontal and vertical deformation in detail. To confirm refined SBAS results, we used GPS dataset. The InSAR errors are estimated as ${\pm}1.0mm/yr$ and ${\pm}0.8mm/yr$ from ascending and descending tracks, respectively. Compare to the previous study of 1990s over the Long Valley and its surroundings, Paoha Island and CASA geothermal area still subside. The deformation pattern in the Long Valley area during the study period (2003-2010) went through both subsidence (2003-2007) and slow uplift(2007-2010) episodes. Our research also shows no deformation signal near McGee Creek. Our study provided a better understanding of the surface changes of the indicators in the 1990s and 2000s.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.29-37
• /
• 2016

This paper proposes a shape optimization of the metal boss for a composite motor case using finite element analysis. For the structural safety and the weight reduction of the composite motor case, under the internal pressure, the fiber stress in the dome area and the tightening bolt stress are constrained and the boss weight is set to objective function, respectively. The response surface models are constructed for the performance characteristics by using response surface method. The significance of the design variables about the performance characteristics is evaluated through the ANOVA(analysis of variance) and the goodness of fit test for the constructed model is performed through the regression analysis. The SQP(sequential quadratic programming) algorithm is used for the optimization and the proposed method is verified by performing structural analysis for the optimum shape.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.11 no.1 s.22
• /
• pp.77-82
• /
• 2005

In order to investigate the initial stage of deep water formation between Vladivostok and the subpolar front in the East Sea, the factors, temperature, salinity, dissolved oxygen, measured by multi-ship surveys in ]969 have been used. Deep water formation in the .cast Sea occurs in essentially two different forms: near continent and open ocean formation. The position of eddy derived from potential vorticity matches well with that of deep water formation. The vertical and horizontal distributions of potential vorticity, geostrophic current, temperature, salinity and dissolved oxygen give clues for the preconditioning phase qf open ocean formation like a doming of isotherm, associated with a cyclonic circulation.