• 한국지진공학회논문집
• /
• 제27권1호
• /
• pp.25-35
• /
• 2023

Considering the non-linear behavior of structure and soil when evaluating a nuclear power plant's seismic safety under a beyond-design basis earthquake is essential. In order to obtain the nonlinear response of a nuclear power plant structure, a time-domain SSI analysis method that considers the nonlinearity of soil and structure and the nonlinear Soil-Structure Interaction (SSI) effect is necessary. The Boundary Reaction Method (BRM) is a time-domain SSI analysis method. The BRM can be applied effectively with a Perfectly Matched Layer (PML), which is an effective energy absorbing boundary condition. The BRM has a characteristic that the magnitude of the response in far-field soil increases as the boundary interface of the effective seismic load moves outward. In addition, the PML has poor absorption performance of low-frequency waves. For this reason, the accuracy of the low-frequency response may be degraded when analyzing the combination of the BRM and the PML. In this study, the accuracy of the analysis response was improved by adjusting the PML input parameters to improve this problem. The accuracy of the response was evaluated by using the analysis response using KIESSI-3D, a frequency domain SSI analysis program, as a reference solution. As a result of the analysis applying the optimal PML parameter, the average error rate of the acceleration response spectrum for 9 degrees of freedom of the structure was 3.40%, which was highly similar to the reference result. In addition, time-domain nonlinear SSI analysis was performed with the soil's nonlinearity to show this study's applicability. As a result of nonlinear SSI analysis, plastic deformation was concentrated in the soil around the foundation. The analysis results found that the analysis method combining BRM and PML can be effectively applied to the seismic response analysis of nuclear power plant structures.

• 한방재활의학과학회지
• /
• 제32권2호
• /
• pp.123-138
• /
• 2022

Objectives This study was conducted to evaluate the clinical efficacy and safety of the chuna combination treatment for patients who complain of functional impairment and pain even 3 months after total knee arthroplasty. Methods 24 patients who had 3 months of surgery and who had knee joint pain with a score of 4 or higher on the numerical rating scale (NRS) for more than a week were selected as subjects. The test group received usual care and Chuna treatment and the control group received the administration of drugs as usual care. And then the clinical efficacy and safety were compared and evaluated. Follow-up was performed 1 month after the end of treatment. Results As a result of the analysis, it was confirmed that the primary parameter Korean Western Ontario and McMaster Universities (K-WOMAC) showed statistical significance in the amount of change in visit 2-visit 10 (V2-V10) in the pain domain and in the amount of change in visit 2-follow 1 (V2-FU1) in the functional domain and total score domain. The secondary parameter (NRS, risk of fall, and range of motion) showed a tendency to decrease in the degree of discomfort, but statistical significance could not be confirmed. Conclusions Because this study did not have enough study subjects, it is difficult to use the results as confirmatory evidence. However, it was confirmed that the 4-week Chuna treatment had a significant effect and safety in patients who underwent total knee arthroplasty. Therefore, this study is meaningful as a prior research data to prepare confirmatory evidence in the future.

• 한국군사과학기술학회지
• /
• 제12권4호
• /
• pp.540-547
• /
• 2009

In the near future, military robots are likely to be substituted for military personnel in the field of battle. The power system of a legged robot is considerably more complex than the one used for a land vehicle because of the coordination and stability issues due to the large number of degree of freedom. In this paper, a servovalve-piston combination system for a straight-line motion of robot leg is modeled as three degree of freedom based on double inputs and single output transfer function. The output is the displacement of piston from neutral. The inputs are valve displacement from neutral and arbitrary load force in this system. LQR(Linear Quadratic Regulator) technique is applied in order to achieve robust stability and fast responses of the system. The Kalman filter loop, rejection of disturbance and noise, riccati equation, filter gain matrix, and frequency domain equality are analyzed and designed.

• Smart Structures and Systems
• /
• 제3권4호
• /
• pp.405-422
• /
• 2007

A new hybrid damping technique for vibration reduction in flexible structures, wherein a combination of layers of hard passive damping alloys and active (smart) magnetostrictive material is used to reduce vibrations, is proposed. While most conventional vibration control treatments are based exclusively on either passive or active based systems, this technique aims to combine the advantages of these systems and simultaneously, to overcome the inherent disadvantages in the individual systems. Two types of combined damping systems are idealized and studied here, viz., the Noninteractive system and the Interactive system. Frequency domain studies are carried out to investigate their performance. Finite element simulations using previously developed smart beam elements are carried out on typical metallic and laminated composite cantilever beams treated with hybrid damping. The influence of various parameters like excitation levels, frequency (mode) and control gain on the damping performance is investigated. It is shown that the proposed system could be used effectively to dampen the structural vibration over a wide frequency range. The interaction between the active and passive damping layers is brought out by a comparative study of the combined systems. Illustrative comparisons with 'only passive' and 'only active' damping schemes are also made. The influence and the mode dependence of control gain in a hybrid system is clearly illustrated. This study also demonstrates the significance and the exploitation of strain dependency of passive damping on the overall damping of the hybrid system. Further, the influence of the depthwise location of damping layers in laminated structures is also investigated.

• 한국산업정보학회논문지
• /
• 제4권1호
• /
• pp.110-116
• /
• 1999

본 논문에서는 시간영역 유한차분법의 단점인 긴 계산 시간을 단축시키기 위하여 신호처리 기법을 사용하였다. 시간영역 유한차분법과 함께 신호처리 기법을 사용하여 주파수 특성을 해석할 때 신호처리기법을 사용하지 않은 일반적인 시간영역 유한차분법으로 해석한 결과와 동일한 결과를 매우 짧은 시간에 구할 수 있었다. 신호처리 기법을 사용하진 않은 일반적인 시간영역 유한차분법으로 마이크로스트림 구조의 저역통과 필터의 주파수 특성을 해석하였을 때 약 900분의 계산 시간이 필요하였으나 신호처리 기법을 이용한 시간영역 유한차분법을 사용하면 약 140분으로 계산 시간을 단축시킬 수 있었다. 회로를 해석한 결과와 측정한 결과가 넓은 주파수 대역에서 거의 일치하는 것을 보였다.

• 지구물리와물리탐사
• /
• 제7권4호
• /
• pp.234-244
• /
• 2004

주파수 영역 유한요소 파동방정식의 3차원 모델링은 거대한 크기의 산재행렬(sparse matrix)인 임피던스 행렬을 풀어야 한다. 이러한 이유 때문에 파동방정식의 3차원 모델링은 주로 시간 영역에서 이루어지고 있다. 이 연구는 주파수 영역 파동방정식의 유한요소 3차원 모델링 연구의 일환으로 라플라스 영역에서 1개 주파수에 대한 파동방정식 해를 이용하여 주시와 진폭을 계산할 수 있는 SWEET(Suppressed Wave Equation Estimation of Traveltime) 알고리즘과 병렬 유한요소 솔버를 결합하여 주파수 영역 3차원 모델링을 시도 하였다. 이렇게 계산된 주시와 진폭은 파선이론에 기반하여 계산된 주시와 진폭과 달리 급경사 구조 또는 수평 속도의 비가 큰 곳에서도 정확하게 계산되며, Kirchhoff 구조보정에 유용하게 사용될 수 있다. 연구의 결과를 검증하기 위하여 SEG/EAGE 3D 암염 모델의 주시와 진폭 계산에 적용하여 이를 검증하였다.

• 한국정보통신학회논문지
• /
• 제14권10호
• /
• pp.2292-2298
• /
• 2010

웹에서 제공되는 정보나 콘텐츠, 또는 Open API 서비스를 섞어 하나의 새로운 서비스를 창출하는 것이 매쉬업 서비스이다. 단순한 정보의 조합이 아닌 필요에 의해 개발된 매쉬업 서비스는 실용성과 편리함으로 새로운 부가가치 창출에 기여할 수 있다. 따라서 본 논문에서는 날씨와 같은 일기 예보와 해양 환경 정보가 중요한 사용자들을 위해 지도와 연계된 RIA 기반 동적 매쉬업 서비스를 개발하고자 한다. 본 논문은 지도와 연계한 사업장 정보의 동적 등록 과정과 선택된 사업장에 대해 지도상에 위치를 마킹하고 사업장의 내부 환경정보, 외부 연안정보, 날씨 정보를 함께 한 화면에 보여 주도록 설계하고 구현하였다. 구현된 서비스는 한 화면 내에서 동시에 여러 정보를 확인 가능하기에 매번 관련 정보 확인을 위해 해당 웹 사이트를 방문해야 했던 지루한 과정이 필요 없다.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.55-62
• /
• 2015

In this study we demonstrate ultrahigh-resolution spectral domain optical coherence tomography (UHR SD-OCT) with a linear-wavenumber (k) spectrometer, to accelerate signal processing and to display two-dimensional (2-D) images in real time. First, we performed a numerical simulation to find the optimal parameters for the linear-k spectrometer to achieve ultrahigh axial resolution, such as the number of grooves in a grating, the material for a dispersive prism, and the rotational angle between the grating and the dispersive prism. We found that a grating with 1200 grooves and an F2 equilateral prism at a rotational angle of $26.07^{\circ}$, in combination with a lens of focal length 85.1 mm, are suitable for UHR SD-OCT with the imaging depth range (limited by spectrometer resolution) set at 2.0 mm. As guided by the simulation results, we constructed the linear-k spectrometer needed to implement a UHR SD-OCT. The actual imaging depth range was measured to be approximately 2.1 mm, and axial resolution of $3.8{\mu}m$ in air was achieved, corresponding to $2.8{\mu}m$ in tissue (n = 1.35). The sensitivity was -91 dB with -10 dB roll-off at 1.5 mm depth. We demonstrated a 128.2 fps acquisition rate for OCT images with 800 lines/frame, by taking advantage of NVIDIA's compute unified device architecture (CUDA) technology, which allowed for real-time signal processing compatible with the speed of the spectrometer's data acquisition.

• 한국세라믹학회지
• /
• 제54권4호
• /
• pp.261-271
• /
• 2017

Environment-friendly $(K,Na)NbO_3-based$ (KNN) lead-free piezoelectric materials have been studied extensively in the past decade. Significant progress has been made in this field, manifesting competitive piezoelectric performance with that of lead-based, for specific application scenarios. Further understanding of the relationship between high piezoelectricity and microstructure or more precisely, ferroelectric domain structure, domain wall pinning effect, domain wall conduction and local polarization switching underpins the continuous advancement of piezoelectric properties, with the help of piezoresponse force microscopy (PFM). In this review, we will present the fundamentals of scanning probe microscopy (SPM) and its cardinal derivative in piezoelectric and ferroelectric world, PFM. Some representative operational modes and a variety of recent applications in KNN-based piezoelectric materials are presented. We expect that PFM and its combination with some newly developed technology will continue to provide great insight into piezoelectric materials and structures, and will play a valuable role in promoting the performance to a new level.

• 동력기계공학회지
• /
• 제16권5호
• /
• pp.40-46
• /
• 2012

본 연구에서는 자유표면 유동문제를 효율적으로 계산하기 위한 방법으로서, 수치 파수조를 구현하여 잠수체에 의한 조파현상을 시간영역에서 다룰 수 있는 수치해법에 대하여 소개하였다. 그리고 이를 이용하여 수행된 연구내용들을 검토하고 양력물체의 경우를 포함하기 위하여 개선된 수학적 정식화 및 수치해법의 개요를 다루었다. 임의의 운동을 하는 양력물체에 의한 조파현상을 전산기로 구현하는 수치 파수조는 과중한 계산시간이 문제가 되는데, 이는 수치 Kutta 조건의 구현과 양력표면 후방의 wake 영역을 계산에서 고려해야 하기 때문이다. 따라서 한층 더 수치계산의 효율성이 중요하다고 판단되므로, 본 연구에서 소개된 3차원 고차 스펙트럴/경계요소법(High-Order Spectral/Boundary Element Method)은 자유표면 요소수를 N이라 할 때 그 계산량이 NlogN에 비례(N이 클 때는 거의 선형적으로 비례)하여 증가하므로 기존의 방법들 보다 매우 효율적인 수치해법이라 할 수 있다. 향후, 본 연구의 타당성 검증을 위한 수치코드의 개선과 여러 가지 수치계산결과 비교 등의 노력이 더 필요하다고 생각된다.