• The Korean Journal of Ecology
• /
• v.20 no.1
• /
• pp.61-68
• /
• 1997

Due to its lack of wave action and tide ecosystem in Inchon dock lacks in marine characteristics. Structural condition in the dock is artificially similar to that of lake. The purposes of this study was to clarify the water quality, to provide the basic physicochemical data and tl resolve the causation of ？미 blooming. Samples were obtained monthly from four stations in Inchon dock during January to December, 1991. Water temperature ranged from $2.7^{\circ}C$ to $27.6^{\circ}C$ under the strong influence of air temperature. Salinity varied between 24.7%-30.4% thus being influenced by freshwater discharged from a spring. Dissolved oxygen was concentrated from 0.1-13.92 mg/l and suspended solids were 6.9-231.0 mg/l. The physicochemical factors were similar to those investigated 10 years ago. However, increased concentration of nitrogenous nutrients initiated ？미 blooming and its process was accelerated to reach eutrophication. Algal blooming was proceeded in March and August.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.51-64
• /
• 1999

This study is on the focus of the cost-effective and time-effective in the BCTOC which commenced the On Dock Termainal System in 1998 for the first time in Korea. On this process of study two categories should be considered : (1) Improvement on Business Process (2) Improvement on Information Technology. With these two accesses a new future-oriented and prospective model could be put on our hand as follows. (1) Improvement on Business Process \circled1Consistency of container In-Out Operation \circled2Simplicity of Rate appraisal \circled3Unified operation on Billing and Request (2) Improvement on Information Technology \circled1Scale up the Information Application \circled2Constructing an one-spot simultaneous Information Holding System \circled3Combination of Internet and Integrated Database System.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.325-331
• /
• 2008

Recently, new shipbuilding yards with medium capacity are established due to influence of prosperous condition no shipbuilding industry in Korea. These shipbuilding yards have characteristics such as high capacity facilities and followed system of dock launching just like major shipbuilding yards. The present paper explains the dry dock design and structural strength analysis by using FEM. The design stage used TRIBON M3 system while the estimation of structural strength used ANSYS Multiphysics module. The dry dock gate did not frequently open and close, it had to sustain against external wave load during building a ship. Moreover, documents related to design of dry dock gate have no guidelines about design criterion and process of structural strength calculation. It is necessary to make the guidelines about design of dry dock gate. It is expected that this paper will be a good reference to the design of dry dock gate.

• Korean Journal of Computational Design and Engineering
• /
• v.17 no.6
• /
• pp.409-416
• /
• 2012

Most of the shipbuilding scheduling researches so far have been conducted with stress on the dock plan. That is due to the fact that the dock is the least extendable resource in shipyards and its overloading is difficult to resolve. However, once the dock scheduling is completed, it is also important to make a plan that make the best use of the rest of the resources in the shipyard, so that any additional cost is minimized. This study automates block allocation process by analyzing the existing manual process that designates production bays for the blocks during the midterm planning. Also, a planning scenario validation method is suggested, where block allocation scenarios based on diagrams are edited and simulated.

• Journal of Korean Port Research
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1999

Port competition is generally classified into two type of inter-domestic ports and intermational ports and the latter is measured how to secure the function of intermediacy for foreign cargoes among competing parts. In the Northeast Asia top 20 world container ports such as Pusan, Kobe, Yokohama and Kaohsiung are struggling to induce transshipment containers generated in the North China region. This paper aims to analyze and evaluate the competitive factors of the said ports such as port site facilities expenses service level and flexibility of management and operations and suggest the feasible strategies that the Pusan Port to be viable transshipment center in the region. The evaluation is attempted twice. First attempt is evaluated by present conditions of each port and second attempt by upgraded conditions of evaluation value such as port service level and flexibility of port management and operations resulted from the implementation of the ON-DOCK service system. The results of evaluation are as follows; (1) Port competitiveness of first evaluation is ranked in Kobe=Kaohsiung >Pusan>Yokohama. (2) Second evaluation is resulted in Kobe> Pusan= Kaohsiung>Yokohama. According to this results the competitiveness edge of the Pusan Port is able to strengthen by implementation of the ON-DOCk system.

• The Research Journal of the Costume Culture
• /
• v.14 no.2
• /
• pp.260-270
• /
• 2006

In this research, the curly dock was used in the process of dyeing for fabrics of the inner wear & the patient wear. Since the curly dock has a pharmacological effect on dermatosis, this study focused on the variety of color and functions of the inner wear fabrics & patient wear fabrics to make the best use of the pharmacological effect of curly dock. With regards to giving a variety of colors and functions in the inner wear, patient wear fabrics, the curly dock dye was used in each treatment conditions on the cotton & silk fabrics. After dyeing, the dyeability, color change, light fastness, washing fastness, perspiration fastness, antibiosis, far infrared emissivity and emission power were evaluated. The evaluation results are as follows; The dyeablity increased from repeated dyeing and, by using the mordant, variety of colors such as skin, mustard, greyish-brown and dark earth colors were conformed to the naked eye. Fe mordant was better than Al on the lightfastness and the washing fastness. The repeated dyeing was found out to have less effect on neither lightfastness nor washing fastness. Both silk and cotton fabrics were graded $3{\sim}4$, since their degree of degradation appeared to be the same in alkali perspiration and acidic perspiration. In the case of silk fabrics mordanted by Al, the rate of declining in both Staphylococcus aureus ATCC 6538 and Klebsiella pneumonia ATCC 4352 were 99.9%. In addition, the antibiosis was enhanced when the mordant was used. The far infrared was 86.6% of emissivity, $3.34{\times}10^2\;W/m^2{\cdot}{\mu}m$ emission power.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.1 s.151
• /
• pp.48-54
• /
• 2007

Higher productivity and less cost during the manufacturing process of ships are required to maintain international competitiveness of modern shipbuilding industries. The integrated hull/ outfitting/ painting scheduling(IHOP) process is a final point, where logistics are finally being integrated and upcoming schedules are made. Therefore, more profits are expected from IHOP by effective management. In this thesis, IHOP is proposed in order to solve how to choose block erection date with IHOP scheduling logic. The result of IHOP scheduling is highly advised to utilize fabrication, outfitting shops. A standardized operation and load of resource will eventually be applied in long-term time span point of view for this will make it easy to enable capacity planning and workforce planning. It is also expected to eliminate inefficiency in overtime work and efficiently utilize manpower in short-term.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.1
• /
• pp.162-174
• /
• 2014

Most shipbuilding scheduling research so far has focused on the load level on the dock plan. This is because the dock is the least extendable resource in shipyards, and its overloading is difficult to resolve. However, once dock scheduling is completed, making a plan that makes the best use of the rest of the resources in the shipyard to minimize any additional cost is also important. Block assignment planning is one of the midterm planning tasks; it assigns a block to the facility (factory/shop or surface plate) that will actually manufacture the block according to the block characteristics and current situation of the facility. It is one of the most heavily loaded midterm planning tasks and is carried out manually by experienced workers. In this study, a method of representing the block assignment rules using a diagram was suggested through analysis of the existing manual process. A block allocation program was developed which automated the block assignment process according to the rules represented by the diagram. The planning scenario was validated through a case study that compared the manual assignment and two automated block assignment results.

• Journal of Korean Port Research
• /
• v.5 no.1
• /
• pp.55-69
• /
• 1991

A Container terminal is a physical link between the ocean and land modes of transport and a major component of the container physical distribution system. A number of projects to increase terminal productivity in the world were found to be tied directly to increasing the efficiency of the intermodal activities, that is, to improving the physical distribution process. This is an indication that the productivity of container terminal is being considered withing a system prospective. The purpose of this study is to establish a model of the container physical distribution system for Pusan port linked with 4 sub-systems including Navigational aids system, Cargo handling/transfer/storage system on dock, Off-dock CY system and In-land transport connection system. and to analyze the system. From this analysis, we found that the system had three bottlenecks on the container physical distribution process in Pusan port : a) cargo handling b) storage and c) inland transport, and showed a way to improve the system.

• Ocean Systems Engineering
• /
• v.4 no.2
• /
• pp.99-115
• /
• 2014

When caissons are mounted on a floating transportation barge and towed by a tug boat in waves, motion of the floating dock creates inertia and gravity-induced slip forces on the caisson. If its magnitude exceeds the corresponding friction force between the two surfaces, a slip may occur, which can lead to an unwanted accident. In oblique waves, both pitch and roll motions occur simultaneously and their coupling effects for slip and friction forces become more complicated. With the presence of strong winds, the slip force can appreciably be increased to make the situation worse. In this regard, the safety of the transportation process of a caisson mounted on a floating dock for various wind-wave conditions is investigated. The analysis is done by both frequency-domain approach and time-domain approach, and their differences as well as pros and cons are discussed. It is seen that the time-domain approach is more direct and accurate and can include nonlinear contributions as well as viscous effects, which are typically neglected in the linear frequency-domain approach.