• Journal of Industrial Technology
• /
• v.22 no.A
• /
• pp.137-144
• /
• 2002

A series of wind tunnel tests was conducted to investigate the existence of the galloping instability of inclined dry cables and also to Identify the influence of some parameters on it. These parameters are the structural damping and cable surface roughness, which may have significant impact on the vibration characteristics. The test results showed both the divergent type of galloping instability and the limited amplitude high wind speed vortex shedding excitation. Galloping instability was observed in only one case. Parametric study shows that the vortex shedding oscillation can be easily suppressed with an increase of structural damping. It was also shown that the instability criterion indicated by earlier research was too conservative compared to the results obtained from the present study.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.1
• /
• pp.54-59
• /
• 2009

In this paper, the effect of the position and size of a lumped mass on the structural stability of a high speed underwater vehicle is presented. For simplicity, a real vehicle was modeled as a follower force subjected beam that was resting on an elastic foundation, and the lumped mass effect was simplified as an elastic intermediate support. The stability of the simplified model was numerically analyzed based on the Finite element method (FEM). This numerical simulation revealed that flutter type instability or divergence type instability occurs, depending on the position and stiffness of the elastic intermediate support, which implies that the instability of the real model is affected by the position and size of the lumped mass.

• Journal of Mechanical Science and Technology
• /
• v.20 no.4
• /
• pp.522-532
• /
• 2006

It is well known that screech tones of supersonic jet are generated by a feedback loop driven by the instability waves. Near the nozzle lip where the supersonic jet mixing layer is receptive to external excitation, acoustic disturbances impinging on this area excite the instability waves. This fact implies that the nozzle lip thickness can influence the screech tones of supersonic jet. The objective of the present study is to experimentally investigate the effect of nozzle-lip thickness on screech tones of supersonic jets issuing from a convergent-divergent nozzle. A baffle plate was installed at the nozzle exit to change the nozzle-lip thickness. Detailed acoustic measurement and flow visualization were made to specify the screech tones. The results obtained obviously show that nozzle-lip thickness significantly affects the screech tones of supersonic jet, strongly depending on whether the jet at the nozzle exit is over-expanded or under-expanded.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.96-104
• /
• 2006

In the present paper, the effects of combustion instability on flow structure and flame dynamic with the configurations of burner exit in a model gas turbine combustor are investigated using large eddy simulation(LES). A G-equation flamelet model is employed to simulate the unsteady flame behavior. As a result of mean flow field, the change of divergent half angle(${\alpha}$) at burner exit results in variations in the size and shape of the central toroidal recirculation(CTRZ) as well as flame length by changing corner recirculation zone(CRZ). The case of ${\alpha}=45^{\circ}$ show smaller size and upstream location of CTRZ than that of $90^{\circ}$ and $30^{\circ}$ by the development of higher swirl velocity. The flame length in the case of ${\alpha}=45^{\circ}$ is the most shortest, while that in the case of ${\alpha}=30^{\circ}$ is the longest by the decrease of effective reactive area with the absence of CRZ. Through the analysis of pressure fluctuation, it is identified that the case of ${\alpha}=45^{\circ}$ shows the most largest damping effect of pressure oscillation in all configurations and brings in the noise reduction of 2.97dB, comparing with that of ${\alpha}=30^{\circ}$ having the largest pressure oscillation. These reasons are discussed in detail through the analysis of unsteady phenomena about recirculation zone and flame surface. Finally the effects of flame-acoustic interaction are evaluated using local Rayleigh parameter.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.5
• /
• pp.342-350
• /
• 2008

The effects of combustion instability on flow structure and flame dynamics with the inlet configurations in a model gas turbine combustor were investigated using large eddy simulation (LES). A G-equation flamelet model was employed to simulate the unsteady flame behaviors. As a result of mean flow field, the change of divergent half angle($\alpha$) at combustor inlet results in variations in the size and shape of the central toroidal recirculation (CTRZ) as well as the flame length by changing corner recirculation zone (CRZ). The case of ${\alpha}=45^{\circ}$ show smaller size and upstream location of CTRZ than those of $90^{\circ}$ and $30^{\circ}$ by the development of higher swirl velocity. The flame length in the case of ${\alpha}=45^{\circ}$ is shorter than other cases, while the case of ${\alpha}=30^{\circ}$ yields the longest flame length due to the decrease of effective reactive area with the absence of CRZ. Through the analysis of pressure fluctuation, it was identified that the case of ${\alpha}=45^{\circ}$ shows the largest damping effect of pressure oscillation in all configurations and brings in the noise reduction of 2.97dB, compared to that of ${\alpha}=30^{\circ}$ having the largest pressure oscillation. These reasons were discussed in detail through the analysis of unsteady phenomena related to recirculation zone and flame surface. Finally the effects of flame-acoustic interaction were evaluated using local Rayleigh parameter.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.364-367
• /
• 2005

A series of computational simulations have been carried out for non-reacting and reacting flows in channel-type and divergent scramjet combustor configurations with and without a cavity. Transverse injection of hydrogen is considered with the injection pressure varying from 0.5 to 1.5 MPa. The detailed resolution of the oscillatory flow and flame dynamics are captured at sufficient scale to identify the underlying physical mechanisms, and the role of combustor configuration, cavity and amount of heat addition could be understood.

• Nuclear Engineering and Technology
• /
• v.17 no.4
• /
• pp.290-301
• /
• 1985

600MW(e) CANDU Primary Heat Transport System (PHTS) is composed of the two “figure-of-eight” loops and is designed to operate with the 4% Reactor Outlet Header (ROH) quality at its rated power. This existence of the two compressible regions and the positive flow-qualitly-void feedbacks are the sources of the PHTS flow instability. To ensure the PHTS stability, ROH-ROH interconnect pipes are installed as passive systems. This paper describes the investigation of the PHTS flow instability at its design full power condition. Also studied are the interconnect effect and the inherent system damping effect on the system stability. The time domain stability analyses are accessed by using the ATHER/MOD-I code which is the improved version of the KAERI developed ATHER code. Under the most adverse system modelling, the “figure-of-eight” symmetric loop shows divergent flow oscillations. Under with the interconnect, the PHTS stability is remarkably enhanced so that the system becomes stable. However, even under the conservative pressurizer modelling, the PHTS shows the more convergent flow oscillations. With the interconnect and the pressurizer modelling, its stability is highly credited. Conclusively, the inherent system damping by pressurizer itself can credit the PHTS stability without the interconnect.

• SUVANNABHUMI
• /
• v.2 no.2
• /
• pp.29-51
• /
• 2010

The diversity of Southeast Asia can be also represented at the tremendous number of ethnic groups residing throughout its various regions even beyond national boundaries. What does it mean by the composite of numerous peoples? It has triggered a lot of problems in a nation or overall Southeast Asia. Among them, the most serious one seems to be ethnic conflicts having damaged national integration and caused political, economical, and social instability. In that respect, Karen people have been a minority group situated in the most chronic dispute in Myanmar. Since 1947 some of the Karen equipped with armed forces have been fighting against the military government currently ruling Myanmar. As the result, the refugees over 200,000 population had moved to the mountain camps located at neighboring Thailand, attracting a lot of attention throughout international societies. According to 1931 census by British colonial government, the Karen have the greatest numbers in population as minority and include 16 subgroups including Karenni(Kayah) and Pa-O seemingly excluded from its category in contemporary point of view. It means that Karen people should not be regarded as an ethnic group, and in fact do not show a homogeneous identity under the title of Karen. Given the situation, we need to reconsider the category of Karen. What does the Karen mean in a real sense? Previous studies on the Karen had been performed mainly by anthropologists or missionaries such as Marshall(1922), Hamilton (1976), Hanson Tadaw(1959), Smeaton(1920), Keyes(1979), Hayami (1992; 2004), etc. Most of them examined the Karen as a group and ignored the possibilities of representing the divergent identities vis-à-vis their subgroups. Therefore, they have focused on the myth to convert Karen people to Christianity, although the Christian Karens are less than 20% of total population. As a result, I argue that they would fail to define the real meaning of Karen. It has been caused us to recognize the Karen as a meaningless total entity to be accepted by all means. According to their arguments, the difference among Karen's subgroups is just dealt with the trivial matters that do not affect the ethnic boundary itself, still maintaining the ethnic identity as Karen. As we shall see on this thesis, this is never the case. My thesis aims at uncovering and scrutinizing the real meaning of the category of Karen. For the purpose of it, I will consider Karen people as a linguistic group from the beginning as shown in 1931 census. I argue that the Karen have been affected or exposed by various conditions or environments throughout the harsh history having happened on the areas of current Myanmar and Thailand, leading the vicissitudes of their ethnic identities.