• Steel and Composite Structures
• /
• 제25권4호
• /
• pp.473-484
• /
• 2017

In this study a seismic retrofit scheme for a building structure was presented using steel plate slit dampers. The energy dissipation capacity of the slit damper used in the retrofit was verified by cyclic loading test. Genetic algorithm was applied to find out the optimum locations of the slit dampers satisfying the target displacement. The seismic retrofit of the model structure using the slit dampers was compared with the retrofit with enlarging shear walls. A simple damper distribution method was proposed using the capacity spectrum method along with the damper distribution pattern proportional to the inter-story drifts. The validity of the simple story-wise damper distribution procedure was verified by comparing the results of genetic algorithm. It was observed that the capacity-spectrum method combined with the simple damper distribution pattern leaded to satisfactory story-wise distribution of dampers compatible with the optimum solution obtained from genetic algorithm.

• 한국산림과학회지
• /
• 제99권3호
• /
• pp.259-266
• /
• 2010

우리나라에서 산불 발생 공간분포는 인간 활동과 큰 관련성이 있기 때문에, 지역별 군집형태의 강한 공간의존성을 갖는다. 본 연구에서는 공간의존성의 개념에 입각하여 점자료 분석법을 통한 산불발생의 공간분포패턴을 분석하였다. Ripley의 K 함수를 이용하여 산불 발생 원인별 공간분포 형태를 파악하였으며, Kernel 함수를 통해 산불발생의 공간적 집중도를 분석하였다. 그 결과 정도는 상이하지만 모든 원인의 산불이 임의(random) 분포가 아닌 군집화(clustered)되어 발생하는 특징이 있는 것으로 나타났다. 또한, 산불 발생의 군집성을 원인별로 크게 두 집단으로 나눌 수 있었다. 첫째는 전국적 발생 패턴을 가지는 원인으로 입산자 실화, 논밭두렁 소각과 같은 활동과 관련된 것이고 또 다른 하나는 국지적 군집성을 가지는 원인으로 담뱃불이나 어린이 불장난, 방화이다. 그 군집성의 범위는 30 km내외로 나타났으며, 그 범위 밖에서는 임의 분포하고 있었다. Kernel 함수에 의한 원인별 집중도 분석에서는 강한 군집도를 나타냈던 3가지 원인(담뱃불, 어린이 불장난, 방화)의 경우 대부분 인구밀도가 높은 수도권을 중심으로 발생하는 것을 확인할 수 있었다.

• Bulletin of the Korean Chemical Society
• /
• 제23권6호
• /
• pp.872-879
• /
• 2002

One of the improtant characteristics of core-shell type nanoparticles is the long-term storage and reuse as an aqueous injection solution when required. For this reason, reconstruction of lyophilized core-shell type nanoparticles is considered to be essential . BAB type triblock copolymers differ from AB type diblock copolymers, which contain the A block as a hydrophilic part and the B block as a hydrophobic part. by not being easily redistributed into phosphate-buffered saline (PBS, pH 7.4, 0.1 M). Therefore, lyophilized core-shell type nanoparticles of CEC triblock copolymer were reconstituted using a somication process with a bar-type sonicator in combination with a freezing-thawing process. Soncation for 30s only resuspended CEC nanoparticles in PBS; their particle size distribution showed a monomodal pattern with narrow size distribution. The bimodal size distribution pattern and the aggregates were reduced by further sonication for 120 s but these nanoparticles showed a wide size distribution. The initial burst of drug release was increased by reconstitution process. The reconstitution of CEC core-shell type nanoparticles by freezing-thawing resulted in trimodal distribution pattern and formed aggregates, although freezing-thawing process was easier than sonication . Drug release form CEC nanoparticles prepared by freezing-thawing was slower than from the original dialysis solution. Although core-shell typenanoparticles of CEC triblock copolymers were not easily performed. Cytotoxicity testing of core-shell type nanoparticles of CEC-2 triblock copolymers containing clonazepam (CNZ) was performed using L929 cells. Cytotoxicity of CNZ was decreased by incorporation into nanoparticles.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.704-707
• /
• 1999

Partial discharge(PD) in air insulated electric power systems is responsible for considerable power lossesfrom high voltage transmission lines. PD in air often leads to deterioration of insulation by the combined action of the discharge ions bombarding the surface and the action of chemical compounds that are formed by the discharge and may give rise to interference in ommunication systems. PD can indicate incipient failure. Thus understanding and classification of PD in air is very important to discern source of PD. In this paper, we investigated PD in air by using statical method. We classified air discharge with corona, surface discharge and cavity discharge by source of discharge. we used the mean pulse-height phase distribution $H_{qmean}(\psi)$, the max pulse-height phase distribution $H_{qmax}(\psi)$ , the pulse count phase distribution $H_n(\psi)$ and the max pulse height vs. repetition rate $H_{q}(n)$ for analysis PD pattern. We used statistical operators, such as skewness(S+. S-1, kurtosis(K+, K-), mean phase(AP+. AP-), cross-correlation factor(CC) and asymmetry from the distribution.

• 한국지형학회지
• /
• 제23권2호
• /
• pp.61-70
• /
• 2016

This study intended to analyze the spatial distribution of two types of weeding song (Short Bang-a and Sangsa ryu) and how geomorphic elements influence the propagation of the songs in Chungcheongbuk-do area. The distribution of the two types of song was mapped as point data. According to the result, both types showed similar distribution pattern. In order to figure out the reason of this similarity, the distribution pattern of songs was analyzed at various scales based on geomorphic elements including river, mountain and lineament. The result showed that most of distribution pattern of songs followed the lineament direction. Also, the spatial continuity among mountain that was formed by large and small lineament in various directions could be the path of the cultural diffusion. If the lineament with same direction does not intersect other lineament that have different direction, spatial continuity would be blocked. Consequently it was confirmed that propagation of songs has not spread smoothly.

• Spatial Information Research
• /
• 제12권2호
• /
• pp.211-228
• /
• 2004

본 연구는 대전시를 사례로 하여 주유소의 입지적 특성과 판매권역을 분석하기 위해 설문과 면접 조사, 그리고 GIS의 그리드 분석을 활용하였다. 주유소의 입지적 특성을 분석해 본 결과 고수익 입지유형은 인구밀도와 1일 통행량이 일정수준 이상으로 배후 상주인구와 통행인구가 많아 고수익이 예상되었고, 반면에 저수익 입지유형은 토지이용상 녹지와 개발제한구역 등으로 통행량도 낮아서 높은 수익을 기대하기 어려웠다. 대전시 인구수에 기반하여 판매권역의 공간분포 패턴을 살펴본 결과, 주유소 판매권역의 크기는 인구밀도가 조밀한 중심지역에서 인구밀도가 낮은 외곽지역으로 갈수록 확대되었다. 또한 인구수에 대비하여 주유소가 과다한 주유소 과밀지역과 과소 지역이 분포하는 불균형적 주유소 분포패턴을 보여주었다. 입지-배분모델을 적용한 결과 주유소 과밀 지역에서는 주유소의 수가 줄어들었고, 과소한 지역에서는 신규로 주유소가 입지하여 보다 균형적인 분포패턴을 보여주었다. 이와 같은 연구결과는 석유제품 유통기관별로 최소 배후지 규모를 만족시키면서 균형적 공간 분포패턴을 가질 수 있도록 배치하는데 필요한 기초적인 자료로 활용될 수 있을 것으로 예상된다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1802-1811
• /
• 2016

A novel battery SOH estimation algorithm based on outlier detection has been presented. The Battery state of health (SOH) is one of the most important parameters that describes the usability state of the power battery system. Firstly, a battery system model with lifetime fading characteristic was established, and the battery characteristic parameters were acquired from the lifetime fading process. Then, the outlier detection method based on angular distribution was used to identify the outliers among the battery behaviors. Lastly, the functional relationship between battery SOH and the outlier distribution was obtained by polynomial fitting method. The experimental results show that the algorithm can identify the outliers accurately, and the absolute error between the SOH estimation value and true value is less than 3%.

• Journal of Electrical Engineering and Technology
• /
• 제4권3호
• /
• pp.330-336
• /
• 2009

This paper proposes an on-line voltage management and control solution for a distribution system which can improve the efficiency and accuracy of existing off-line work by collecting customer voltage on-line as well as the voltage compensation capability of the existing ULTC (Under Load Tap Changer) operation and control strategy by controlling the ULTC tap based on pattern clustering and recognition. The proposed solution consists of an ADVMD (Advanced Digital Voltage Management Device), a VMS (Voltage Management Solution) and an OLDUC (On-Line Digital ULTC Controller). An on-line voltage management emulator based on multi-thread programming and the shared memory method is developed to emulate on-line voltage management and digital ULTC control methodology based on the on-line collection of the customer's voltage. In addition, using this emulator, the effectiveness of the proposed pattern clustering and recognition based ULTC control strategy is proven for the worst voltage environments for three days.

• 오토저널
• /
• 제15권3호
• /
• pp.89-95
• /
• 1993

This paper presents the development of CAD system for the design of lens of the Turn Signal Lamp that can model and simulate its optical performance. The system consists of three main modules: skin surface modeling module, inner lens modeling module and optical performance simulation module. Skin surface geometry can be modeled by the input of data file and inner lens can be modeled by the input of only four parameter using its geometric characteristics. Also light distribution pattern, the barometer of optical performance is generated by means of finite ray tracing method. The system display modeled geometry, ray tracing and generated light distribution pattern.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.263-266
• /
• 2002

An optical method for surface roughness estimation based on statistical analysis of the light intensity of a scattered laser beam pattern. The method is very simple but has a disadvantage that no more information than the averaged roughness is estimated. In this study a new try was conducted to derive more advanced surface information from the details of the light intensity distribution. Some periodic ripples among the light intensity distribution being assumed to relate with scratch left on the machined surface, a corresponding surface profile is estimated from the ripples using FFT and IFFT algorithm. IFFT technique is used to extract some dominant signal components among the intensity distribution. Compared to the measured profiles by a stylus type surf-tester, the profiles obtained through the proposed method are probably acceptable in a sense of the profile shape. Calibration of the amplitude needs more works in the future.