• 한국수소및신에너지학회논문집
• /
• 제34권2호
• /
• pp.178-186
• /
• 2023

Three activation methods (constant voltage, current cycling, and hydrogen pumping) were applied to investigate the effects on the performance of the membrane electrode assembly (MEA) loaded with PtCo/C catalyst. The current cycling protocol took the shortest time to activate the MEA, while the performance after activation was the worst among the all activation methods. The constant voltage method took a moderate activation time and exhibited the best performance after activation. The hydrogen pumping protocol took the longest time to activate the MEA with moderate performance after activation. According to the distribution of relaxation time analysis, the improved performance after the activation mainly comes from the decrease of charge transfer resistance rather than the ionic resistance in the cathode catalyst layer, which suggests that the existence of water on the electrode is the key factor for activation.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.74-85
• /
• 2022

We propose a Cubic-Interpolated Pseudo-Particle Lattice Boltzmann method (CIP-LBM) for the convection-diffusion equation (CDE) based on the Bhatnagar-Gross-Krook (BGK) scheme equation. The CIP-LBM relies on an accurate numerical lattice equilibrium particle distribution function on the advection term and the use of a splitting technique to solve the Lattice Boltzmann equation. Different schemes of lattice spaces such as D1Q3, D2Q5, and D2Q9 have been used for simulating a variety of problems described by the CDE. All simulations were carried out using the BGK model, although another LB scheme based on a collision term like two-relation time or multi-relaxation time can be easily applied. To show quantitative agreement, the results of the proposed model are compared with an analytical solution.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.502-505
• /
• 2004

The purpose of this experiment is to modify diagnosis criterion of isothermal relaxation current(IRC) measurement equipment which is using for distribution cable diagnosis. We're using this system for several years in the field instead of DC leakage current measurement and lots of cables were replaced. But we have to investigate on the reliability of this equipment for our cables because we didn't carried out condition assessment of extracted cables after field diagnosis by this equipment. It is important thing for cable maintenance. If the replacement criterion is improper we can not prevent failures or will waste budget on account of replacement of the sound cables. In this papar we selected field installed cables and injected silicone fluid to the cables for insulation rehabilitation. In order to prove reliability of the diagnosis equipment we compared diagnosis results and AC breakdown strength according to operating time after silicone treatment. This is the results of the field test for 1 year.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권5호
• /
• pp.258-263
• /
• 2004

The purpose of this experiment is to modify diagnosis criterion of isothermal relaxation current(IRC) measurement equipment which is using for distribution cable diagnosis. We're using this system for several years in the field instead of DC leakage current measurement and lots of cables were replaced. But we have to investigate on the reliability of this equipment for our cables because we didn't carried out condition assessment of extracted cables after field diagnosis by this equipment. It is important thing for cable maintenance. If the replacement criterion is improper we can not prevent failures or will waste budget on account of replacement of the sound cables. In this paper we selected field installed cables and injected silicone fluid to the cables for insulation rehabilitation. In order to prove reliability of the diagnosis equipment we compared diagnosis results and AC breakdown strength according to operating time after silicone treatment. This is the results of the field test for 1 year.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.191-194
• /
• 2007

In hot embossing lithography which has shown to be a good method to fabricate polymeric patterns for IT and bio components, it is very important to determine the proper process conditions of pressure, temperature, and time. It is also a key factor for predicting the optical properties of final product to calculate residual stress distribution after the embossing process. Therefore, to design the optimum process with right conditions, the ability to predict viscoelastic behavior of polymer during and after the hot embossing process is required. The objective of the present investigation is to establish simulation technique based on constitutive modeling of polymer with experiments. To analyze deformation behavior of viscoelastic polymer, the large strain material properties were obtained from quasi-static compression tests at different strain rates and temperatures and also stress relaxation tests were executed. With this viscoelastic material model, finite element simulation of hot embossing was executed and stress distribution is obtained. Proper process pressure is very important to predict the defect and incomplete filling.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1798-1803
• /
• 2003

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. The dynamic heat transfer can be described by a partial differential equation (PDE) and its initial and boundary conditions. For the shake of simplicity PDE is divided into two parts; one corresponding to the heat transfer in the axial direction and the other corresponding to the heat transfer on the vertical layers. Two numerical methods, SOR (Sequential Over-Relaxation) and FEM (Finite Element Method), are implemented to solve these equations respectively. The axial line is discretized, and SOR is applied. Similarly, all the layers are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The heat fluxes on the layers are calculated by FEM. It is shown that the penetration cable influences the temperature distribution of the fire stop system very significantly. The simulation results are shown in the three-dimensional graphics for the understanding of the transient temperature distribution in the fire stop system.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.170-174
• /
• 2003

In this research, we consider an integrated manufacturing/distribution planning problem in supply chain (SC) which has non-integer time lags. We focus on a capacitated manufacturing planning and capacity allocation problem for the system. We develop a mixed binary integer linear programming (MBLP) model and propose an efficient heuristic procedure using an adaptive genetic algorithm, which is composed of a regeneration procedure for evaluating infeasible chromosomes and the reduced costs from the LP-relaxation of the original model. The proposed an adaptive genetic algorithm was tested in terms of the solution accuracy and algorithm speed during numerical experiments. We found that our algorithm can generate the optimal solution within a reasonable computational time.

• Bulletin of the Korean Chemical Society
• /
• 제14권1호
• /
• pp.95-100
• /
• 1993

A noise-induced transition is presented for a bistable system subjected to a multiplicative random force, which is singular at the unstable state. The stationary probability distribution is obtained from the Fokker-Planck equation and the effects of the singularity is analyzed. On the basis of noise-induced phase transition with Gaussian white noise, the relaxation time and the transition rate of the system are evaluated up to the first order correction of D. In the parameter region v < l, the transition rates decrease as the exponent v goes to 1 and as the coefficient of the linear term of the kinetic equation increases.

• Steel and Composite Structures
• /
• 제32권6호
• /
• pp.779-793
• /
• 2019

The purpose of this research paper is to depict the thermomechanical interactions in transversely isotropic magneto thermoelastic solid with two temperatures and without energy dissipation in generalized LS theories of thermoelasticity. The Laplace and Fourier transform techniques have been used to find the solution of the problem. The displacement components, stress components, and conductive temperature distribution with the horizontal distance are computed in the transformed domain and further calculated in the physical domain numerically. The effect of two temperature and relaxation time are depicted graphically on the resulting quantities.

• 센서학회지
• /
• 제2권1호
• /
• pp.65-74
• /
• 1993

본(本) 연구(硏究)에서는 소형(小型) 정전유도형(靜電誘導型) 모터를 제작하고 이 모터에 인가하는 3상(相) 교류전압(交流電壓) 및 주파수(周波數)를 가변(可變)하였을 때의 회전자(回轉字)의 회전속도(回轉速度)의 특성을 실험적으로 검토하였다. 또한 정전유도형(靜電誘導型) 모터의 작동기구상(作動機構上) 회전자(回轉字) 표층물질(表層物質) 및 내층물질(內層物質)의 표면저항율(表面抵抗率), 비유전율(比誘電率) 및 전하완화시정수(電荷緩和時定數)를 변화시켜 회전자(回轉字) 및 고정자(固定子) 사이의 전계강도(電界强度) 및 회전자(回轉字) 표면물질상(表面物質上)의 표면유기전하(表面誘起電荷)의 분포(分布) 및 유기속도(誘起速度)를 변화시킴으로서 소형(小型) 정전유도형(靜電誘導型) 모터의 회전자의 회전속도에 미치는 영향을 검토하였다. 실험(實驗) 결과(結果), 회전자(回轉字) 표층물질(表層物質)의 비유전율(比誘電率), 표면저항률(表面抵抗率) 및 전하완화시정수(電荷緩和時定數) 및 내층물질(內層物質)의 비저항율(比抵抗率)이 모터의 회전속도(回轉速度)에 매우 큰 영향을 미침이 확인되었다. 또한 모터에 인가하는 3상(相) 전원(電源)의 전압(電壓) 및 주파수(周波數)도 모터의 회전(回轉)에 매우 큰 영향을 주며, 회전속도(回轉速度)는 인가전압(印加電壓) 및 주파수(周波數)에 일차(一次) 비례(比例)하여 증가함을 보여주었다. 회전자의 표층물질(表層物質)이 $BaTiO_{3}$ 80% 내층물질(內層物質)이 Cu 일때 무부하(無負荷) 최대속도(最大速度)는 4.5 kV, 220 Hz에서 5500 rpm이 얻어졌다.